[flashrom] [PATCH] Add Broadcom OSB4 chipset enable / parallel flash chips

Mattias Mattsson vitplister at gmail.com
Thu Sep 16 02:53:20 CEST 2010

On Wed, Sep 15, 2010 at 16:34, Joshua Roys <roysjosh at gmail.com> wrote:
> Hello,
> Awesome!  I'm glad you got it working.
> On 09/15/2010 06:19 AM, Carl-Daniel Hailfinger wrote:
>> Funny. The 0xc6f access looks very similar to parts of the SB400 chipset
>> enable. (Side note: we should ask AMD if the SB400 chipset enable is
>> correct.)
> Yes, I noticed the same thing- hence the placement in chipset_enable.c.
>> Joshua, I would like this in 0.9.3. Would it be OK for you to split the
>> patch in a chipset enable and a flash chip addition? If possible,
>> coordinate with Mattias to avoid conflicts in flashchips.[ch]
> OK, attached are two separate patches and a diff...  if the chip #define
> fixup gets applied first, then use the post-prefix-change.diff.txt and
> squash it in with the flash chip patch.  Otherwise that patch will have
> to be updated in order to account for these chips.  (I'll try to figure
> out on IRC what order these will be in, and if needs be I can spin
> another patch set.)
> Thanks!
> Signed-off-by: Joshua Roys <roysjosh at gmail.com>


Flash chip part
Acked-by: Mattias Mattsson <vitplister at gmail.com>

Fixed a small typo (TEST_PR -> TEST_OK_PR), added two more Bright chip
IDs and committed as r1176.


More information about the flashrom mailing list