[flashrom] [PATCH] Convert PCI-based programmers to LE MMIO accessors

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Sun Sep 5 01:40:29 CEST 2010


On 28.07.2010 00:10, Carl-Daniel Hailfinger wrote:
> On 27.07.2010 17:33, Michael Manulis wrote:
>   
>> ./flashrom -p satasii -V
>> flashrom v0.9.2-r1075 on Linux 2.6.16.13-vsm (ppc), built with
>> libpci 2.2.4-pre4, GCC 4.1.2 20061115 (prerelease) (Debian 4.1.1-21),
>> big endian
>>
>> Calibrating delay loop... OS timer resolution is 1 usecs, 499M loops per
>> second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1003 us,
>> 10000 myus = 9984 us, 4 myus = 4 us, OK.
>> Initializing satasii programmer
>> Found "Silicon Image SiI 3512 [SATALink/SATARaid] SATA Ctrl" (1095:3512, BDF 00:0a.0).
>> Requested BAR is IO
>> ===
>> This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output 
>> to flashrom at flashrom.org if it works for you. Thank you for your help!
>> ===
>> Mapping SATA SIL registers at 0xf0000000, unaligned size 0x100.
>>     
>
> I'll mark your controller as supported in a followup patch.
>   

flash chip and controller marked as supported in r1152.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/





More information about the flashrom mailing list