[flashrom] [PATCH] Support for HP DL165 G6

[Arne Georg Gleditsch]

On 26. mai 2010 15:56, Michael Karcher wrote:
> Try to find an lspci dump of that DL145 and check whether some PCI
> signature is different. If not, check whether DMI contains some string
> that makes it possible to tell the systems apart. If nothing helps, PCI
> subsystem IDs (not the normal vendor/device IDs!) have to be ripped out
> for both systems, disabling auto-detection, and manual -m is needed in
> any case.

As Google has it, it would appear that the onboard NIC is different:

DL145:
08:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3)
08:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3)

DL165:
02:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10)
02:02.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10)

Perhaps that could be used for the secondary PCI device in the signature?
I believe the device currently listed there is the on-board VGA chip; I'm
not sure why that was chosen.

-- 
								Arne.