[flashrom] ASUS A8N-VM CSM results (write/erase failed)

[Michael Karcher]

Am Montag, den 24.05.2010, 22:23 +0300 schrieb Ville Skyttä:
> Just to ensure I understood the flashrom project process correctly:
> 
> Is there something else besides sending the info I did I could do to get this 
> board supported (or marked as not working) in flashrom?  I haven't noticed 
> anything related to the board happening in svn and I'm afraid I can't help 
> with coding support for it.
I am sorry for the delay you experienced. Regretfully I was busy with
real life issues and thus lost track of pending board enable requests.
You did send all information needed to write a board enable procedure
for your board.

If anyone else wants to take it, here the *brief* explanation of what
needs to be done: Set bit 2 (value 0x04) in the Super I/O config reg
0xE4/LDN 0x09. It is an Winbond W83627.

Regards,
  Michael Karcher