[flashrom] P5Q3 Asus MotherBoard - Flashrom status UNTESTED

[oops66]

Hello,
Here it is the result for (-V and -rV),
Tx for your appli.
Have a nice day

--------------------------------------------------

flashrom -R
flashrom v0.9.1-r946
Under Ubuntu 32bits Lucid 10.04
P5Q3 Asus MotherBoard

===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to flashrom at flashrom.org if any of the above 
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested.
Thanks for your help!


//////////////////////////////////// sudo flashrom -V 
//////////////////////////////////////////////////////

  sudo flashrom -V
flashrom v0.9.1-r946
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5Q3"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH10R", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x1464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 
(SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2018 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 3, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00414004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... 853M loops per second, 100 myus = 199 us. OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Chip status register is 00
Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 
0x5a, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x6e, id2 
0xda, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. 
probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. 
probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 
0x5a, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xd2, id2 
0x60, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x6e, id2 
0xda, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 
0x53, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than 
supported size 1024 kB of chipset/board/programmer for FWH interface, 
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring 
RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. 
Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. 
Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than 
supported size 1024 kB of chipset/board/programmer for FWH interface, 
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x6e, id2 
0xda, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI 
and chip bus type LPC are incompatible.
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 
0x5a, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 
0x53, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct 
probe timing information, using default 10mS/40uS. probe_jedec_common: 
id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, 
zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash 
chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, 
zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash 
chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash 
chip, zero size at 0x00000000.
REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Not unmapping zero size at (nil)
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to flashrom at flashrom.org if any of the above 
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested.
Thanks for your help!
===
No operations were specified.




///////////////////////////// sudo flashrom -rV PQ3-v707.ROM 
/////////////////////////////////////////////

  sudo flashrom -rV PQ3-v707.ROM
[sudo] password for christophe:
flashrom v0.9.1-r946
No coreboot table found.
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5Q3"
DMI string baseboard-version: "Rev 1.xx"
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH10R", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed1c000
GCS = 0x1464: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 
(SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x2018 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 3, AEL 0, FCERR 0, FDONE 0
0x50: 0x00000202 (FRAP)
BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00414004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x463b     (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... 851M loops per second, 100 myus = 198 us. OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Chip status register is 00
Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 
0x5a, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x6e, id2 
0xda, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. 
probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. 
probe_spi_rems: id1 0x1c, id2 0x13
Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 
0x5a, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xd2, id2 
0x60, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x6e, id2 
0xda, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 
0x53, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than 
supported size 1024 kB of chipset/board/programmer for FWH interface, 
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring 
RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. 
Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. 
Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip 
bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than 
supported size 1024 kB of chipset/board/programmer for FWH interface, 
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x6e, id2 0xda
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53
Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI 
and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. 
probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x6e, id2 
0xda, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI 
and chip bus type LPC are incompatible.
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and 
chip bus type LPC are incompatible.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 
0x5a, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 
0x53, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct 
probe timing information, using default 10mS/40uS. probe_jedec_common: 
id1 0x6e, id2 0xda, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, 
zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash 
chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero 
size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, 
zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash 
chip, zero size at 0x00000000.
RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114
Not unmapping zero size at (nil)
Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash 
chip, zero size at 0x00000000.
REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13
Not unmapping zero size at (nil)
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to flashrom at flashrom.org if any of the above 
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Reading flash... done.


/////////////////////////////////////////////////////////////////////////////////