[flashrom] [PATCH] Detect IP35 by the SMBus bridge instead of the SATA controller
Michael Karcher
flashrom at mkarcher.dialup.fu-berlin.de
Sun Jun 20 00:01:12 CEST 2010
The SATA controller matched in the board enable is not always present
with that ID (that's the 2-port ICH9 SATA IDE controller), but (depending
on board revision/edition or BIOS settings an ICH9 SATA RAID controller
appears instead. This patches matches on the SMBus function in the
south bridge instead of the SATA controller.
Signed-off-by: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>
---
board_enable.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board_enable.c b/board_enable.c
index 7d731c3..54ca1c2 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -1434,7 +1434,7 @@ struct board_pciid_enable board_pciid_enables[] = {
/* first pci-id set [4], second pci-id set [4], dmi identifier coreboot id [2], vendor name board name max_rom_... OK? flash enable */
#if defined(__i386__) || defined(__x86_64__)
{0x10DE, 0x0547, 0x147B, 0x1C2F, 0x10DE, 0x0548, 0x147B, 0x1C2F, NULL, NULL, NULL, "Abit", "AN-M2", 0, NT, nvidia_mcp_gpio2_raise},
- {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise},
+ {0x8086, 0x2930, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise},
{0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, "Abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise},
{0x10de, 0x0050, 0x147b, 0x1c1a, 0, 0, 0, 0, NULL, NULL, NULL, "Abit", "KN8 Ultra", 0, NT, nvidia_mcp_gpio2_lower},
{0x10de, 0x01e0, 0x147b, 0x1c00, 0x10de, 0x0060, 0x147B, 0x1c00, NULL, NULL, NULL, "Abit", "NF7-S", 0, OK, nvidia_mcp_gpio8_raise},
--
1.7.1
More information about the flashrom
mailing list