[flashrom] [PATCH] Board enable for Asus P4S800-MX

[David Borg]

Tested and works. Thanks to Carl-Daniel Hailfinger for simplifying the
chipset enable for this board!

Index: board_enable.c
===================================================================
--- board_enable.c    (revision 1127)
+++ board_enable.c    (working copy)
@@ -352,7 +352,9 @@
 }

 /**
- * w83627: Enable MEMW# and set ROM size to max.
+ * Enable MEMW# and set ROM size to max.
+ * Supported chips:
+ * W83L517D, W83697HF/F/HG, W83697SF/UF/UG
  */
 static void w836xx_memw_enable(uint16_t port)
 {
@@ -1715,6 +1717,7 @@
     {0x8086, 0x24D3, 0x1043, 0x80A6,  0x8086, 0x2578, 0x1043, 0x80F6,
NULL,          NULL,         NULL,          "ASUS",        "P4C800-E
Deluxe",       0,   OK, intel_ich_gpio21_raise},
     {0x8086, 0x2570, 0x1043, 0x80F2,  0x105A, 0x3373, 0x1043, 0x80F5,
NULL,          NULL,         NULL,          "ASUS",        "P4P800-E
Deluxe",       0,   OK, intel_ich_gpio21_raise},
     {0x8086, 0x2570, 0x1043, 0x80A5,  0x105A, 0x24D3, 0x1043, 0x80A6,
NULL,          NULL,         NULL,          "ASUS",        "P4SD-LA",
             0,   NT, intel_ich_gpio32_raise},
+    {0x1039, 0x0661, 0x1043, 0x8113,  0x1039, 0x0003,     0,       0,
"^P4S800-MX$", NULL,         NULL,          "ASUS",
"P4S800-MX",           512,   OK, w836xx_memw_enable_2e},
     {0x10B9, 0x1541,      0,      0,  0x10B9, 0x1533,      0,      0,
"^P5A$",       "asus",       "p5a",         "ASUS",        "P5A",
             0,   OK, board_asus_p5a},
     {0x10DE, 0x0030, 0x1043, 0x818a,  0x8086, 0x100E, 0x1043, 0x80EE,
NULL,          NULL,         NULL,          "ASUS",        "P5ND2-SLI
Deluxe",      0,   OK, nvidia_mcp_gpio10_raise},
     {0x8086, 0x24dd, 0x1043, 0x80a6,  0x8086, 0x2570, 0x1043, 0x8157,
NULL,          NULL,         NULL,          "ASUS",        "P5PE-VM",
             0,   OK, intel_ich_gpio21_raise},

Signed-off-by: David Borg <borg.db at gmail.com>



On 28 July 2010 03:06, David Borg <borg.db at gmail.com> wrote:
>
> Updated the patch to remove anything related to chip  (un)locking, as there is no way to unlock the superio except by a cold reset.
>
> Logs for the different flashrom runs and the outputs of lspci -nnvvvxxx and superiotool -deV are also attached.
>
> w836xx_memw_enable will work for this board, however i'd still like to see the function corrected for completeness sake. I haven't yet found a datasheet for a superio in the w83627 family where the function is correct, and the supported superio's all work with sio_mask(port, 0x24, 0x28, 0x38); Perhaps it should be fixed in a separate patch?
>
> Regards,
> David
>
> On 1 July 2010 11:50, David Borg <borg.db at gmail.com> wrote:
>>
>> Patch to add support for the Asus P4S800-MX motherboard and SIS 963
>> chipset. Invalidates previous patch: [PATCH] add support for SIS963
>>
>> If anyone has the output of superiotool -deV for the following working
>> boards, please forward them, so I can merge the functions
>> w836xx_unlock_memw_enable_2e and w836xx_memw_enable_2e, and maybe fix
>> the function w836xx_memw_enable which I believe has a typo, such that
>>                sio_mask(port, 0x24, 0x28, 0x28);
>> becomes : sio_mask(port, 0x24, 0x28, 0x38);
>>
>> Motherboards:
>> Albatron - PM266A Pro
>> ASUS - A7V8X-MX SE
>> EPoX - EP-8K5A2
>> Shuttle - AK31
>> Tyan - S2498 (Tomcat K7M)
>> Termtek - TK-3370 (Rev:2.5B)
>> MSI - MS-6590 (KT4 Ultra)
>> MSI - MS-6712 (KT4V)
>> MSI - MS-7005 (651M-L)
>>
>> Signed-off-by: David Borg <borg.db at gmail.com>
>>
>> Regards,
>> David
>
>
>
> --
> David Borg



--
David Borg