[flashrom] [PATCH] Add ECS RS485M-M and Biostar TA780G M2+ boards

Uwe Hermann uwe at hermann-uwe.de
Fri Jul 30 19:12:00 CEST 2010

On Thu, Jul 29, 2010 at 05:39:06PM -0400, Daniel Lenski wrote:
> I own both these boards, and they work fine with flashrom
> internal programming.
> ECS RS485M-M is Socket AM2, AMD SB600-based
> Biostar TA780G M2+ is Socket AM2, AMD 780G-based
> Signed-off-by: Daniel Lenski <dlenski at gmail.com>

Thanks, committed in r1127 with a small change (I dropped the "V1.0" from
"RS485M-M V1.0", the website seems to always show a 1.0 version for all
boards in general, even if no 2.0 version exists, in which case we
usually don't print the version number. We usually only do that if two
versions of the board exist with differing hardware.

Just to be sure: when you say "work fine with flashrom" you mean you
tested write/erase and flashrom said VERIFIED? Only testing probe/read
operations is not sufficient.

http://hermann-uwe.de     | http://sigrok.org
http://randomprojects.org | http://unmaintained-free-software.org

More information about the flashrom mailing list