[flashrom] netbook hp 2133 mini :(

Paweł Stawicki stawel at gmail.com
Tue Jul 27 14:46:34 CEST 2010


> I suspect that we're not handling some lockdown correctly. Could you do
> a short check for us?
> Insert directly before ichspi.c line 1068:
> ichspi_lock = 1;
>
>
changed to:

   spi_controller = SPI_CONTROLLER_VIA;
   ichspi_lock = 1;
   ich_init_opcodes();

   return 0;
}



> Then please recompile and run again in verbose mode. I don't expect
> success, but I think we have a good chance to learn more.
>
>
attaching  output:
ubuntu at ubuntu:~/flashrom$ sudo ./flashrom -p
internal:laptop=force_I_want_a_brick -V > flashrom2.txt
delay loop is unreliable, trying to continue
========================================================================
WARNING! You seem to be running flashrom on a laptop.
Laptops, notebooks and netbooks are difficult to support and we recommend
to use the vendor flashing utility. The embedded controller (EC) in these
machines often interacts badly with flashing.
See http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
Proceeding anyway because user specified laptop=force_I_want_a_brick
Mapping VT8237S MMIO registers at 0xfed02000, unaligned size 0x70.
ubuntu at ubuntu:~/flashrom$

Regards
Paweł
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100727/0eab9245/attachment.html>
-------------- next part --------------
flashrom v0.9.2-r1109 on Linux 2.6.32-21-generic (i686), built with libpci 3.0.0, GCC 4.4.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 2 usecs, 123M loops per second, delay more than 10% too short (got 32% of expected delay), recalculating... 194M loops per second, delay more than 10% too short (got 50% of expected delay), recalculating... 321M loops per second, delay more than 10% too short (got 82% of expected delay), recalculating... 217M loops per second, delay more than 10% too short (got 56% of expected delay), recalculating... 165M loops per second, 10 myus = 5 us, 100 myus = 43 us, 1000 myus = 420 us, 10000 myus = 4434 us, 8 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "HP 2133"
DMI string system-version: "F.06"
DMI string baseboard-manufacturer: "Hewlett-Packard"
DMI string baseboard-product-name: "3030"
DMI string baseboard-version: "KBC Version 07.17"
DMI string chassis-type: "Notebook"
Laptop detected via DMI
Found chipset "VIA VT8237S", enabling flash write... chipset PCI ID is 1106:3372, MMIO base at = 0xfed02000
0x6c: 0xffff     (CLOCK/DEBUG)
Reading OPCODES... done
OK.
This chipset supports the following protocols: LPC,FWH,SPI.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25DF041A, 512 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25DF081, 1024 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25DF161, 2048 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25DF321, 4096 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25DF321A, 4096 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25DF641, 8192 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25F512B, 64 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25FS010, 128 KB: Invalid OPCODE 0x9f
Probing for Atmel AT25FS040, 512 KB: Invalid OPCODE 0x9f
Probing for Atmel AT26DF041, 512 KB: Invalid OPCODE 0x9f
Probing for Atmel AT26DF081A, 1024 KB: Invalid OPCODE 0x9f
Probing for Atmel AT26DF161, 2048 KB: Invalid OPCODE 0x9f
Probing for Atmel AT26DF161A, 2048 KB: Invalid OPCODE 0x9f
Probing for Atmel AT26F004, 512 KB: Invalid OPCODE 0x9f
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB011D, 128 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB021D, 256 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB041D, 512 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB081D, 1024 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB161D, 2048 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB321C, 4224 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB321D, 4096 KB: Invalid OPCODE 0x9f
Probing for Atmel AT45DB642D, 8192 KB: Invalid OPCODE 0x9f
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F020, 256 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L05PT, 64 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L05PU, 64 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L10PT, 128 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L10PU, 128 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L20PT, 256 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L20PU, 256 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L40PT, 512 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L40PU, 512 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L80P, 1024 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L16PT, 2048 KB: Invalid OPCODE 0x9f
Probing for AMIC A25L16PU, 2048 KB: Invalid OPCODE 0x9f
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for EMST F25L008A, 1024 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B05, 64 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B05T, 64 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B10, 128 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B10T, 128 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B20, 256 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B20T, 256 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B40, 512 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B40T, 512 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B80, 1024 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B80T, 1024 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B16, 2048 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B16T, 2048 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B32, 4096 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B32T, 4096 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B64, 8192 KB: Invalid OPCODE 0x9f
Probing for Eon EN25B64T, 8192 KB: Invalid OPCODE 0x9f
Probing for Eon EN25D16, 2048 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F05, 64 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F10, 128 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F20, 256 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F40, 512 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F80, 1024 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F16, 2048 KB: Invalid OPCODE 0x9f
Probing for Eon EN25F32, 4096 KB: Invalid OPCODE 0x9f
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Hyundai HY29F002T, 256 KB: skipped.
Probing for Hyundai HY29F002B, 256 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F002BC-T, 256 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L1005, 128 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L2005, 256 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L4005, 512 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L8005, 1024 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L1605, 2048 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L1635D, 2048 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L3205, 4096 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L3235D, 4096 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L6405, 8192 KB: Invalid OPCODE 0x9f
Probing for Macronix MX25L12805, 16384 KB: Invalid OPCODE 0x9f
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: Invalid OPCODE 0x9f
Probing for Numonyx M25PE20, 256 KB: Invalid OPCODE 0x9f
Probing for Numonyx M25PE40, 512 KB: Invalid OPCODE 0x9f
Probing for Numonyx M25PE80, 1024 KB: Invalid OPCODE 0x9f
Probing for Numonyx M25PE16, 2048 KB: Invalid OPCODE 0x9f
Probing for PMC Pm25LV010, 128 KB: Invalid OPCODE 0x9f
Probing for PMC Pm25LV016B, 2048 KB: Invalid OPCODE 0x9f
Probing for PMC Pm25LV020, 256 KB: Invalid OPCODE 0x9f
Probing for PMC Pm25LV040, 512 KB: Invalid OPCODE 0x9f
Probing for PMC Pm25LV080B, 1024 KB: Invalid OPCODE 0x9f
Probing for PMC Pm25LV512, 64 KB: Invalid OPCODE 0x9f
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: Invalid OPCODE 0x9f
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: Invalid OPCODE 0x9f
Probing for Spansion S25FL016A, 2048 KB: Invalid OPCODE 0x9f
Probing for SST SST25VF016B, 2048 KB: Invalid OPCODE 0x9f
Probing for SST SST25VF032B, 4096 KB: Invalid OPCODE 0x9f
Probing for SST SST25VF064C, 8192 KB: Invalid OPCODE 0x9f
Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90
Probing for SST SST25VF040B, 512 KB: Invalid OPCODE 0x9f
Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab
Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90
Probing for SST SST25VF080B, 1024 KB: Invalid OPCODE 0x9f
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M25P05-A, 64 KB: Invalid OPCODE 0x9f
Probing for ST M25P05.RES, 64 KB: Invalid OPCODE 0x9f
Invalid OPCODE 0x90
Invalid OPCODE 0xab
Probing for ST M25P10-A, 128 KB: Invalid OPCODE 0x9f
Probing for ST M25P10.RES, 128 KB: Invalid OPCODE 0x9f
Invalid OPCODE 0x90
Invalid OPCODE 0xab
Probing for ST M25P20, 256 KB: Invalid OPCODE 0x9f
Probing for ST M25P40, 512 KB: Invalid OPCODE 0x9f
Probing for ST M25P40-old, 512 KB: Invalid OPCODE 0x9f
Invalid OPCODE 0x90
Invalid OPCODE 0xab
Probing for ST M25P80, 1024 KB: Invalid OPCODE 0x9f
Probing for ST M25P16, 2048 KB: Invalid OPCODE 0x9f
Probing for ST M25P32, 4096 KB: Invalid OPCODE 0x9f
Probing for ST M25P64, 8192 KB: Invalid OPCODE 0x9f
Probing for ST M25P128, 16384 KB: Invalid OPCODE 0x9f
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BB, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: Invalid OPCODE 0x9f
Probing for Winbond W25Q16, 2048 KB: Invalid OPCODE 0x9f
Probing for Winbond W25Q32, 4096 KB: Invalid OPCODE 0x9f
Probing for Winbond W25Q64, 8192 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x10, 128 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x20, 256 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x40, 512 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x80, 1024 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x16, 2048 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x32, 4096 KB: Invalid OPCODE 0x9f
Probing for Winbond W25x64, 8192 KB: Invalid OPCODE 0x9f
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49F020, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x0f, id2 0x84, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC unknown AMIC SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for Atmel unknown Atmel SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for EON unknown EON SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for Macronix unknown Macronix SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for PMC unknown PMC SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for SST unknown SST SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for ST unknown ST SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Invalid OPCODE 0x9f
Probing for Generic unknown SPI chip (RDID), 0 KB: Invalid OPCODE 0x9f
Probing for Generic unknown SPI chip (REMS), 0 KB: Invalid OPCODE 0x90
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.


More information about the flashrom mailing list