[flashrom] Flashrom -V output from Tyan S2915
Richard W.M. Jones
rjones at redhat.com
Fri Jul 23 16:13:43 CEST 2010
On Fri, Jul 23, 2010 at 03:42:42PM +0200, Michael Karcher wrote:
> Am Freitag, den 23.07.2010, 14:06 +0100 schrieb Richard W.M. Jones:
> > It still doesn't work for me. The ROM image supplied by Tyan is
> > larger than 1MB and flashrom reports:
> >
> > Error: Image size doesn't match
> That's a common problem - Phoenix adds board and (in later revisions of
> their flashing tools) flash-chip specific code to the ROM image. If the
> image is to be written by phlash16.exe or winphlash, just cut the 1st MB
> to use it with flashrom.
That worked. Maybe it should be a FAQ? I didn't find anything about
phlash16 ROM -> bin conversion even through I did extensive searching.
Thanks,
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine. Supports Linux and Windows.
http://et.redhat.com/~rjones/virt-df/
More information about the flashrom
mailing list