[flashrom] [PATCH] Add support for RayeR SPIPGM hardware.

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Wed Jul 21 12:26:37 CEST 2010


On 21.07.2010 12:15, Michael Karcher wrote:
> Am Mittwoch, den 21.07.2010, 12:09 +0200 schrieb Carl-Daniel Hailfinger:
>   
>> New version. Rename to rayer_spi. Add a manpage entry.
>>
>> Add support for RayeR SPIPGM hardware as described in
>> http://rayer.ic.cz/elektro/spipgm.htm
>>
>> To use the RayeR driver, run
>> flashrom -p rayer_spi -V
>>
>> Known bugs/limitations:
>> - Won't compile/work on non-x86 architectures.
>> - Will always use direct port I/O access.
>>
>> Log follows:
>>
>> flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 
>> 4.3.2, little endian
>> Calibrating delay loop... OK.
>> Initializing rayer_bitbang_spi programmer
>> Using port 0x378 as I/O base for parallel port access.
>> ...
>> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 
>> 0xc2, id2 0x2015
>> ...
>> Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 
>> 0xffe00000.
>> ...
>> No operations were specified.
>>
>> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
>> Acked-by: Martin Rehak <rayer at seznam.cz>
>>     
> Looks good.
>
> Acked-by: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>
>   

Thanks, committed in r1093.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/





More information about the flashrom mailing list