[flashrom] HP Compaq dc7100 SFF

Mattias Mattsson vitplister at gmail.com
Thu Jul 8 07:44:16 CEST 2010


Hi,

I'm using flashrom r1070 on a HP Compaq dc7100 (HP branded m/b) and
the flash chip is not detected. It's a Winbond W39V040FAP.

Latest BIOS is available here:
ftp://ftp.hp.com/pub/softpaq/sp40001-40500/sp40405.exe

Output from flashrom, superiotool and lspci attached.

Please let me know if I can do anything else to help.


Thanks,
-mattias
-------------- next part --------------
flashrom v0.9.2-r1070 on Linux 2.6.32-trunk-686 (i686), built with libpci 3.1.7, GCC 4.4.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1792M loops per second, 10 myus = 11 us, 100 myus = 99 us, 1000 myus = 993 us, 10000 myus = 9951 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "HP Compaq dc7100 SFF(PE271ET)"
DMI string system-version: " "
DMI string baseboard-manufacturer: "Hewlett-Packard"
DMI string baseboard-product-name: "097Ch"
DMI string baseboard-version: "Not Specified"
DMI string chassis-type: "Low Profile Desktop"
Found chipset "Intel ICH6/ICH6R", enabling flash write... chipset PCI ID is 8086:2640, 
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode disabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x80000 bytes
BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2
tried to set 0xdc to 0x3 on ICH6/ICH6R failed (WARNING ONLY)
FAILED!
This chipset supports the following protocols: FWH.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for ASD AE49F2008, 256 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F020, 256 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for EMST F25L008A, 1024 KB: skipped.
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: skipped.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Hyundai HY29F002T, 256 KB: skipped.
Probing for Hyundai HY29F002B, 256 KB: skipped.
Probing for Intel 28F001BX-B, 128 KB: skipped.
Probing for Intel 28F001BX-T, 128 KB: skipped.
Probing for Intel 28F004S5, 512 KB: skipped.
Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xa8, id2 0x78, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25LF040A.RES, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xa8, id2 0x78, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xa8, id2 0x78, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS S29C31004T, 512 KB: skipped.
Probing for SyncMOS S29C51001T, 128 KB: skipped.
Probing for SyncMOS S29C51002T, 256 KB: skipped.
Probing for SyncMOS S29C51004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: skipped.
Probing for Winbond W25Q16, 2048 KB: skipped.
Probing for Winbond W25Q32, 4096 KB: skipped.
Probing for Winbond W25Q64, 8192 KB: skipped.
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: skipped.
Probing for Winbond W29C020C, 256 KB: skipped.
Probing for Winbond W29C040P, 512 KB: skipped.
Probing for Winbond W29EE011, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xa8, id2 0x78, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for EON unknown EON SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
-------------- next part --------------
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=09 <?>
	Kernel driver in use: agpgart-intel
00: 86 80 80 25 06 01 90 20 04 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
40: 00 90 d1 fe 00 40 d1 fe 00 00 00 d0 00 80 d1 fe
50: 00 00 30 00 19 00 00 a8 00 00 00 00 00 00 00 00
60: 01 30 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 11 11 11 11 11 33 00 00 00 00 00 80 1a f8 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 04 00
e0: 09 00 09 21 02 b3 9b 08 02 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00

00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company DC7100 SFF(DX878AV) [103c:3006]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at cfe00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 1800 [size=8]
	Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at cff00000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 82 25 07 00 90 00 04 00 00 03 00 00 80 00
10: 00 00 e0 cf 01 18 00 00 08 00 00 e0 00 00 f0 cf
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 d0 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 e0 00 00 00 09 00 09 21 02 b3 9b 08
50: 02 00 30 00 19 00 00 a8 00 00 00 00 00 00 80 7f
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 44 05 64 34 00 00 00 00 00 00 05 00 00 00 00 00

00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at cfe80000 (32-bit, non-prefetchable) [disabled] [size=512K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 82 27 04 00 90 00 04 00 80 03 00 00 80 00
10: 00 00 e8 cf 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 e0 00 00 00 09 00 09 21 02 b3 9b 08
50: 02 00 30 00 19 00 00 a8 00 00 00 00 00 00 80 7f
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 44 05 64 34 00 00 00 00 00 00 05 00 00 00 00 00

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 80000000-801fffff
	Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag+ RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0300c  Data: 4151
	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:3006]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
			Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=01 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000fed1c001
	Kernel driver in use: pcieport
00: 86 80 60 26 07 05 10 00 03 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 20 20 00 20 20 00 00
20: 00 80 10 80 21 80 31 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 06 00
40: 10 80 41 01 e0 0f 00 00 00 00 10 00 11 4c 01 01
50: 00 00 01 10 60 05 10 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c 30 e0 fe 51 41 00 00 00 00 00 00
90: 0d a0 00 00 3c 10 06 30 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=40, subordinate=40, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f0200000-f04fffff
	Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag+ RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #3, PowerLimit 10.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet+ LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0300c  Data: 4159
	Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:3006]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
			Status:	NegoPending- InProgress-
	Capabilities: [180 v1] Root Complex Link
		Desc:	PortNumber=02 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000fed1c001
	Kernel driver in use: pcieport
00: 86 80 62 26 07 05 10 00 03 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 40 40 00 30 30 00 00
20: 20 f0 40 f0 41 80 51 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 02 06 00
40: 10 80 41 01 e0 0f 00 00 00 00 11 00 11 4c 01 02
50: 00 00 11 10 60 05 18 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c 30 e0 fe 59 41 00 00 00 00 00 00
90: 0d a0 00 00 3c 10 06 30 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 1440 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 58 26 05 00 80 02 03 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 14 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 03 00 00 00 00 00 03 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 4: I/O ports at 1460 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 59 26 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 14 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 03 00 00 00 00 00 03 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at 1480 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 5a 26 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 14 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 03 00 00 00 00 00 03 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 22
	Region 4: I/O ports at 14a0 [size=32]
	Kernel driver in use: uhci_hcd
00: 86 80 5b 26 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 14 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 03 00 00 00 00 00 03 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at cff40000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd
00: 86 80 5c 26 06 01 90 02 03 20 03 0c 00 00 00 00
10: 00 00 f4 cf 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 c0
70: 00 00 d5 3f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 55 a5 ff 00 20 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 80 00 09 88 8c 40 00 80 0f 03 00 86 17 00 00

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
00: 86 80 4e 24 07 01 10 00 d3 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 05 05 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
	Subsystem: Hewlett-Packard Company DC7100 SFF(DX878AV) [103c:3006]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 1000 [size=256]
	Region 1: I/O ports at 1400 [size=64]
	Region 2: Memory at cff40400 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at cff40600 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: Intel ICH
00: 86 80 6e 26 07 00 90 02 03 00 01 04 00 00 00 00
10: 01 10 00 00 01 14 00 00 00 04 f4 cf 00 06 f4 cf
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
40: 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 c9 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
00: 86 80 40 26 07 01 00 02 03 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 f8 00 00 80 00 00 00 01 fa 00 00 10 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 8a 85 85 85 d0 00 00 00 8b 8a 8b 80 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 0d 34 01 04 00 00 81 04 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 06 00 00 01 00 00 00 00 00 00 00 00 13 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 33 22 11 00 67 45 00 00 c0 80 00 00 02 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 c0 d1 fe 00 00 00 00 80 0f 03 00 00 00 00 00

00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 14e0 [size=16]
	Kernel driver in use: PIIX_IDE
00: 86 80 6f 26 05 00 80 02 03 8a 01 01 00 00 00 00
10: 09 18 00 00 29 18 00 00 11 18 00 00 2d 18 00 00
20: e1 14 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: 23 e3 22 c0 00 00 00 00 01 00 01 00 00 00 00 00
50: 00 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Hewlett-Packard Company Device [103c:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 1818 [size=8]
	Region 1: I/O ports at 1830 [size=4]
	Region 2: I/O ports at 1820 [size=8]
	Region 3: I/O ports at 1834 [size=4]
	Region 4: I/O ports at 14f0 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ata_piix
00: 86 80 51 26 05 00 b0 02 03 8f 01 01 00 00 00 00
10: 19 18 00 00 31 18 00 00 21 18 00 00 35 18 00 00
20: f1 14 00 00 00 00 00 00 00 00 00 00 3c 10 06 30
30: 00 00 00 00 70 00 00 00 00 00 00 00 05 02 00 00
40: 27 e3 22 c0 00 00 00 00 01 00 01 00 00 00 00 00
50: 00 00 00 00 10 10 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 02 40 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 1f 90 82 01 80 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at fc00 [size=32]
	Kernel driver in use: i801_smbus
00: 86 80 6a 26 01 01 80 02 03 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 80 0f 03 00 00 00 00 00

40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
	Subsystem: Hewlett-Packard Company DC7100 SFF(DX878AV) [103c:3006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
		Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
		Read-only fields:
			[PN] Part number: BCM95751
			[EC] Engineering changes: 106679-15
			[SN] Serial number: 0123456789
			[MN] Manufacture ID: 31 34 65 34
			[RV] Reserved: checksum bad, 28 byte(s) reserved
		Read/write fields:
			[YA] Asset tag: XYZ01234567
			[RW] Read-write area: 107 byte(s) free
		End
	Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
		Address: 4e60a611d04919cc  Data: b0e1
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <2us, L1 <64us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [13c v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
	Kernel driver in use: tg3
00: e4 14 77 16 06 01 10 00 01 00 00 02 10 00 00 00
10: 04 00 40 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 07 00 00 00 3c 10 06 30
30: 00 00 c0 f1 48 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 01 50 02 c0 00 20 00 64
50: 03 58 fc 80 00 00 00 78 05 d0 86 00 cc 19 49 d0
60: 11 a6 60 4e e1 b0 00 00 98 02 01 40 00 00 18 76
70: f2 10 00 00 bf 00 00 00 10 70 00 00 00 00 00 00
80: 78 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 01 00 00 00 00 c8 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0e 00 00 00 00 00 00 00
d0: 10 00 01 00 a0 0f 28 00 00 50 10 00 11 54 03 00
e0: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

-------------- next part --------------
superiotool r5651
Probing for ALi Super I/O at 0x3f0...
  Failed. Returned data: id=0x0000, rev=0x00
Probing for ALi Super I/O at 0x370...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
  Failed. Returned data: id=0x6f01, rev=0x9
Probing for ITE Super I/O (init=it8502e) at 0x2e...
  Failed. Returned data: id=0x6f01, rev=0x9
Probing for ITE Super I/O (init=it8761e) at 0x2e...
  Failed. Returned data: id=0x6f01, rev=0x9
Probing for ITE Super I/O (init=it8228e) at 0x2e...
  Failed. Returned data: id=0x6f01, rev=0x9
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id=0x6f01, rev=0x9
Probing for ITE Super I/O (init=standard) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Found SMSC LPC47B397 (id=0x6f, rev=0x01) at 0x2e
No dump available for this Super I/O
No extra registers known for this chip.
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x88) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
  PCI device 1106:0686 not found.


More information about the flashrom mailing list