[flashrom] [PATCH] Add Nvidia nForce MCP6x/MCP7x series SPI flashing support

Christian Schmitt chris at ilovelinux.de
Sat Jul 3 16:32:31 CEST 2010

flashrom -V
flashrom v0.9.2-runknown on Linux 2.6.32-gentoo-r8 (i686), built with libpci 
3.1.4, GCC 4.4.3, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 3 usecs, 390M loops per 
second, 10 myus = 12 us, 100 myus = 99 us, 1000 myus = 1227 us, 10000 myus = 
10214 us, 12 myus = 22 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "LENOVO"
DMI string system-product-name: "20021,2959"
DMI string system-version: "Lenovo Ideapad S12"
DMI string baseboard-manufacturer: "LENOVO"
DMI string baseboard-product-name: "MoutCook"
DMI string baseboard-version: "Not Applicable"
DMI string chassis-type: "Notebook"
Laptop detected via DMI
WARNING! You seem to be running flashrom on a laptop.
Laptops, notebooks and netbooks are difficult to support and we recommend
to use the vendor flashing utility. The embedded controller (EC) in these
machines often interacts badly with flashing.
See http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.

More information about the flashrom mailing list