[flashrom] S2915, flashrom , linux failure

Wed Jan 20 18:03:22 CET 2010

Hiya Flashrom folks,

Some addtional info. when I force the tool to read using the chip name ,
it will dump the flash (though warning it may be garbage) and some
string comparison with the "original V101.ROM shows it is at least not
random.

.
> sapienza:~/Bios #  ./flashrom -V -f -c SST49LF080A -r dump.bin
> flashrom v0.9.1-r710
> No coreboot table found.
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 648M loops per second, 100 myus = 191 us. OK.
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
> information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
> id1 parity violation, id1 is normal flash content, id2 is normal flash
> content
> No EEPROM/flash device found.
> Force read (-f -r -c) requested, forcing chip probe success:
> Probing for SST SST49LF080A, 1024 KB: Found chip "SST SST49LF080A"
> (1024 KB, LPC) at physical address 0xfff00000.
> Please note that forced reads most likely contain garbage.
> Reading flash... done.

Does this help ? Since apparently forcing a probe success returned
non-random output (compared to the original V101 ROM ).

I have no idea why it fails to find the chip, unless there is something
wrong with bios calls in jedec.c

Cheers

PHiL

Phil wrote:
> Hello Joel,
>
> I also cannot get flashrom to work, and I have attached the output
> with the verbose flag.  You will note that the correct chip (according
> to the screenshot) has some timing error.
>
> I am running opensuse 11.2 , and the current bios rev is  1.01.2915
> (from dmidecode) .(You can see why I wish to upgrade....!!)
>
> I hope this helps, and if you need me to run some other  diags let me
> know.
>
> Cheers
>
> PHiL
>
>
> ------------------------------------------------------------------------
>
> flashrom v0.9.1-r710
> No coreboot table found.
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 645M loops per second, 100 myus = 190 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x5b, id2 0xfb
> Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x4e, id2 0x41
> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
> Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x0d, id2 0xd6, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
> Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x4e, id2 0x41
> Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x4e, id2 0x41
> Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
> Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x5d, id2 0x58
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
> Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x4e, id2 0x41, id1 parity violation
> Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff
> Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x4e, id2 0x41
> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found automatically.
>
>   