[flashrom] [commit] r854 - trunk
svn at flashrom.org
svn at flashrom.org
Sun Jan 10 02:08:38 CET 2010
Author: snelson
Date: 2010-01-10 02:08:37 +0100 (Sun, 10 Jan 2010)
New Revision: 854
Modified:
trunk/ft2232_spi.c
Log:
Convert all messages in ft2232_spi.c to the new message infrastructure.
Fix one pinfo message to be pdbg.
Signed-off-by: Sean Nelson <audiohacked at gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Modified: trunk/ft2232_spi.c
===================================================================
--- trunk/ft2232_spi.c 2010-01-10 01:06:23 UTC (rev 853)
+++ trunk/ft2232_spi.c 2010-01-10 01:08:37 UTC (rev 854)
@@ -29,17 +29,6 @@
#include "spi.h"
#include <ftdi.h>
-/* Change this to #define if you want lowlevel debugging of commands
- * sent to the FT2232 SPI controller.
- */
-#undef COMM_DEBUG
-
-#ifdef COMM_DEBUG
-#define msg_comm_debug printf_debug
-#else
-#define msg_comm_debug(...) do {} while (0)
-#endif
-
/*
* The 'H' chips can run internally at either 12MHz or 60MHz.
* The non-H chips can only run at 12MHz.
@@ -62,7 +51,7 @@
int r;
r = ftdi_write_data(ftdic, (unsigned char *) buf, size);
if (r < 0) {
- fprintf(stderr, "ftdi_write_data: %d, %s\n", r,
+ msg_perr("ftdi_write_data: %d, %s\n", r,
ftdi_get_error_string(ftdic));
return 1;
}
@@ -74,7 +63,7 @@
int r;
r = ftdi_read_data(ftdic, (unsigned char *) buf, size);
if (r < 0) {
- fprintf(stderr, "ftdi_read_data: %d, %s\n", r,
+ msg_perr("ftdi_read_data: %d, %s\n", r,
ftdi_get_error_string(ftdic));
return 1;
}
@@ -91,7 +80,7 @@
enum ftdi_interface ft2232_interface = INTERFACE_B;
if (ftdi_init(ftdic) < 0) {
- fprintf(stderr, "ftdi_init failed\n");
+ msg_perr("ftdi_init failed\n");
return EXIT_FAILURE; // TODO
}
@@ -115,48 +104,48 @@
ft2232_interface = INTERFACE_B;
break;
default:
- fprintf(stderr, "Invalid interface specified, "
+ msg_perr("Invalid interface specified, "
"using default.\n");
}
}
free(programmer_param);
}
- printf_debug("Using device type %s ",
+ msg_pdbg("Using device type %s ",
(ft2232_type == FTDI_FT2232H) ? "2232H" : "4232H");
- printf_debug("interface %s\n",
+ msg_pdbg("interface %s\n",
(ft2232_interface == INTERFACE_A) ? "A" : "B");
f = ftdi_usb_open(ftdic, 0x0403, ft2232_type);
if (f < 0 && f != -5) {
- fprintf(stderr, "Unable to open FTDI device: %d (%s)\n", f,
+ msg_perr("Unable to open FTDI device: %d (%s)\n", f,
ftdi_get_error_string(ftdic));
exit(-1); // TODO
}
if (ftdi_set_interface(ftdic, ft2232_interface) < 0) {
- fprintf(stderr, "Unable to select interface: %s\n",
+ msg_perr("Unable to select interface: %s\n",
ftdic->error_str);
}
if (ftdi_usb_reset(ftdic) < 0) {
- fprintf(stderr, "Unable to reset FTDI device\n");
+ msg_perr("Unable to reset FTDI device\n");
}
if (ftdi_set_latency_timer(ftdic, 2) < 0) {
- fprintf(stderr, "Unable to set latency timer\n");
+ msg_perr("Unable to set latency timer\n");
}
if (ftdi_write_data_set_chunksize(ftdic, 512)) {
- fprintf(stderr, "Unable to set chunk size\n");
+ msg_perr("Unable to set chunk size\n");
}
if (ftdi_set_bitmode(ftdic, 0x00, BITMODE_BITBANG_SPI) < 0) {
- fprintf(stderr, "Unable to set bitmode to SPI\n");
+ msg_perr("Unable to set bitmode to SPI\n");
}
#if CLOCK_5X
- printf_debug("Disable divide-by-5 front stage\n");
+ msg_pdbg("Disable divide-by-5 front stage\n");
buf[0] = 0x8a; /* Disable divide-by-5. */
if (send_buf(ftdic, buf, 1))
return -1;
@@ -167,7 +156,7 @@
#define MPSSE_CLK 12.0
#endif
- printf_debug("Set clock divisor\n");
+ msg_pdbg("Set clock divisor\n");
buf[0] = 0x86; /* command "set divisor" */
/* valueL/valueH are (desired_divisor - 1) */
buf[1] = (DIVIDE_BY - 1) & 0xff;
@@ -175,16 +164,16 @@
if (send_buf(ftdic, buf, 3))
return -1;
- printf("SPI clock is %fMHz\n",
+ msg_pdbg("SPI clock is %fMHz\n",
(double)(MPSSE_CLK / (((DIVIDE_BY - 1) + 1) * 2)));
/* Disconnect TDI/DO to TDO/DI for loopback. */
- printf_debug("No loopback of TDI/DO TDO/DI\n");
+ msg_pdbg("No loopback of TDI/DO TDO/DI\n");
buf[0] = 0x85;
if (send_buf(ftdic, buf, 1))
return -1;
- printf_debug("Set data bits\n");
+ msg_pdbg("Set data bits\n");
/* Set data bits low-byte command:
* value: 0x08 CS=high, DI=low, DO=low, SK=low
* dir: 0x0b CS=output, DI=input, DO=output, SK=output
@@ -196,7 +185,7 @@
if (send_buf(ftdic, buf, 3))
return -1;
- // printf_debug("\nft2232 chosen\n");
+ // msg_pdbg("\nft2232 chosen\n");
buses_supported = CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_FT2232;
@@ -223,7 +212,7 @@
if (bufsize > oldbufsize) {
buf = realloc(buf, bufsize);
if (!buf) {
- fprintf(stderr, "Out of memory!\n");
+ msg_perr("Out of memory!\n");
exit(1);
}
oldbufsize = bufsize;
@@ -235,7 +224,7 @@
* and deassert CS# all in one shot. If reading, we do three separate
* operations.
*/
- msg_comm_debug("Assert CS#\n");
+ msg_pspew("Assert CS#\n");
buf[i++] = SET_BITS_LOW;
buf[i++] = 0 & ~CS_BIT; /* assertive */
buf[i++] = 0x0b;
@@ -260,7 +249,7 @@
failed = ret;
/* We can't abort here, we still have to deassert CS#. */
if (ret)
- fprintf(stderr, "send_buf failed before read: %i\n",
+ msg_perr("send_buf failed before read: %i\n",
ret);
i = 0;
if (ret == 0) {
@@ -273,18 +262,18 @@
failed |= ret;
/* We can't abort here either. */
if (ret)
- fprintf(stderr, "get_buf failed: %i\n", ret);
+ msg_perr("get_buf failed: %i\n", ret);
}
}
- msg_comm_debug("De-assert CS#\n");
+ msg_pspew("De-assert CS#\n");
buf[i++] = SET_BITS_LOW;
buf[i++] = CS_BIT;
buf[i++] = 0x0b;
ret = send_buf(ftdic, buf, i);
failed |= ret;
if (ret)
- fprintf(stderr, "send_buf failed at end: %i\n", ret);
+ msg_perr("send_buf failed at end: %i\n", ret);
return failed ? -1 : 0;
}
@@ -302,13 +291,13 @@
spi_disable_blockprotect();
/* Erase first. */
- printf("Erasing flash before programming... ");
+ msg_pinfo("Erasing flash before programming... ");
if (erase_flash(flash)) {
- fprintf(stderr, "ERASE FAILED!\n");
+ msg_perr("ERASE FAILED!\n");
return -1;
}
- printf("done.\n");
- printf_debug("total_size is %d\n", total_size);
+ msg_pinfo("done.\n");
+ msg_pdbg("total_size is %d\n", total_size);
for (i = 0; i < total_size; i += 256) {
int l, r;
if (i + 256 <= total_size)
@@ -317,7 +306,7 @@
l = total_size - i;
if ((r = spi_nbyte_program(i, &buf[i], l))) {
- fprintf(stderr, "%s: write fail %d\n", __func__, r);
+ msg_perr("%s: write fail %d\n", __func__, r);
return 1;
}
More information about the flashrom
mailing list