[flashrom] Asus P2B-N / Mosel Vitelic V29C51002T
Mattias Mattsson
vitplister at gmail.com
Mon Aug 16 22:18:46 CEST 2010
Hi,
I have tested flashrom r1143 patched with board enable (lower GPO18)
on an Asus P2B-N with Mosel Vitelic V29C51002T flash. Probe, read,
erase,
write all work.
Logs attached.
Thanks,
-mattias
-------------- next part --------------
flashrom v0.9.2-r1143 on Linux 2.6.32-5-686 (i686), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 4 usecs, 223M loops per second, 10 myus = 13 us, 100 myus = 102 us, 1000 myus = 1039 us, 10000 myus = 10098 us, 16 myus = 19 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "System Manufacturer"
DMI string system-product-name: "System Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P2B-N"
DMI string baseboard-version: "REV 1.xx"
DMI string chassis-type: "Unknown"
Found chipset "Intel PIIX4/4E/4M", enabling flash write... chipset PCI ID is 8086:7110, OK.
This chipset supports the following protocols: Parallel.
Disabling flash write protection for board "ASUS P2B-N"... OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x25, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L05PT, 64 KB: skipped.
Probing for AMIC A25L05PU, 64 KB: skipped.
Probing for AMIC A25L10PT, 128 KB: skipped.
Probing for AMIC A25L10PU, 128 KB: skipped.
Probing for AMIC A25L20PT, 256 KB: skipped.
Probing for AMIC A25L20PU, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A25L80P, 1024 KB: skipped.
Probing for AMIC A25L16PT, 2048 KB: skipped.
Probing for AMIC A25L16PU, 2048 KB: skipped.
Probing for AMIC A25L512, 64 KB: skipped.
Probing for AMIC A25L010, 128 KB: skipped.
Probing for AMIC A25L020, 256 KB: skipped.
Probing for AMIC A25L040, 512 KB: skipped.
Probing for AMIC A25L080, 1024 KB: skipped.
Probing for AMIC A25L016, 2048 KB: skipped.
Probing for AMIC A25L032, 4096 KB: skipped.
Probing for AMIC A25LQ032, 4096 KB: skipped.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF081A, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25DQ161, 2048 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for EMST F25L008A, 1024 KB: skipped.
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x25, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x22, id2 0x2d
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x22, id2 0x2d
Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Intel 28F002BC-T, 256 KB: probe_82802ab: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0x22, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0x22, id2 0x2d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: skipped.
Probing for Intel 82802AC, 1024 KB: skipped.
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x25, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: skipped.
Probing for PMC Pm49FL004, 512 KB: skipped.
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: skipped.
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF064C, 8192 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25LF040A.RES, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SST SST49LF002A/B, 256 KB: skipped.
Probing for SST SST49LF003A/B, 384 KB: skipped.
Probing for SST SST49LF004A/B, 512 KB: skipped.
Probing for SST SST49LF004C, 512 KB: skipped.
Probing for SST SST49LF008A, 1024 KB: skipped.
Probing for SST SST49LF008C, 1024 KB: skipped.
Probing for SST SST49LF016C, 2048 KB: skipped.
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0x22, id2 0x2d
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x22, id2 0x2d
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x25, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xcb, id2 0xd8, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: skipped.
Probing for ST M50FLW040B, 512 KB: skipped.
Probing for ST M50FLW080A, 1024 KB: skipped.
Probing for ST M50FLW080B, 1024 KB: skipped.
Probing for ST M50FW002, 256 KB: skipped.
Probing for ST M50FW016, 2048 KB: skipped.
Probing for ST M50FW040, 512 KB: skipped.
Probing for ST M50FW080, 1024 KB: skipped.
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Found chip "SyncMOS/MoselVitelic {F,S,V}29C51002T" (256 KB, Parallel) at physical address 0xfffc0000.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x22, id2 0xfd, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25Q80, 1024 KB: skipped.
Probing for Winbond W25Q16, 2048 KB: skipped.
Probing for Winbond W25Q32, 4096 KB: skipped.
Probing for Winbond W25Q64, 8192 KB: skipped.
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: skipped.
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0x40, id2 0x02
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: skipped.
Probing for Winbond W39V080FA, 1024 KB: skipped.
Probing for Winbond W39V080FA (dual mode), 512 KB: skipped.
Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped.
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for Eon unknown Eon SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
===
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Thanks for your help!
===
Reading flash... done.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: p2b-n_flashrom-Vw.txt
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100816/6eaeacc7/attachment.txt>
-------------- next part --------------
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-intel
00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 8a 00 03 00 00 00 09 03 10 11 00 00 00 11 11
60: 08 10 10 10 10 10 10 10 00 aa ea af 0a f0 00 00
70: 20 1f 0a 38 05 00 03 01 04 03 10 38 00 00 00 00
80: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 80 20 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 30 00 00 00 00 00 b5 07 20 10 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 00 00 1e 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 9c b3 ff 7f 8f 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0800000-e2efffff
Prefetchable memory behind bridge: e3f00000-e3ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: 86 80 91 71 17 01 20 02 03 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 d0 d0 a0 22
20: 80 e0 e0 e2 f0 e3 f0 e3 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05)
Subsystem: Intel Corporation 82558 10/100 with Wake on LAN [8086:0008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e3000000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at b800 [size=32]
Region 2: Memory at e0000000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 08000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: e100
00: 86 80 29 12 17 00 90 02 05 00 00 02 08 20 00 00
10: 08 00 00 e3 01 b8 00 00 00 00 00 e0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 08 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 08 38
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 31 fe
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 09 00 e4 02
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 80 80 05 0a 10 00 00 00 00 f2 80 00 00 00 00 00
70: 00 00 00 00 00 00 0c 0c 00 00 00 00 00 00 00 00
80: 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 05 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 25 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00
00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at b400 [size=16]
Kernel driver in use: PIIX_IDE
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 b4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 a1 00 80 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00
00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00
00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 e4 00 00 00 00 00 20 1e 30 00 01 00 00 00 00
50: 00 58 09 00 c0 c8 3b 02 37 40 40 03 00 00 00 00
60: 90 02 e7 00 00 00 00 10 04 e4 11 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00
00:09.0 Multimedia audio controller [0401]: ESS Technology ES1969 Solo-1 Audiodrive [125d:1969] (rev 01)
Subsystem: ESS Technology Solo-1 Audio Adapter [125d:8888]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a800 [size=64]
Region 1: I/O ports at a400 [size=16]
Region 2: I/O ports at a000 [size=16]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9400 [size=4]
Capabilities: [c0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ESS ES1938 (Solo-1)
00: 5d 12 69 19 05 00 90 02 01 00 01 04 00 20 00 00
10: 01 a8 00 00 01 a4 00 00 01 a0 00 00 01 98 00 00
20: 01 94 00 00 00 00 00 00 00 00 00 00 5d 12 88 88
30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 02 18
40: 5f 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 21 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro AGP 1X/2X [1002:4742] (rev 5c) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Rage Pro Turbo AGP 2X [1002:4742]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at e0800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at e3fe0000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 02 10 42 47 87 00 90 02 5c 00 00 03 08 40 00 00
10: 00 00 00 e1 01 d8 00 00 00 00 80 e0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 42 47
30: 00 00 fe e3 50 00 00 00 00 00 00 00 0b 01 08 00
40: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 00 10 00 03 02 00 ff 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-------------- next part --------------
superiotool r5651
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Found Winbond W83977TF (id=0x97, rev=0x73) at 0x3f0
Register dump:
idx 20 21 22 23 24 25 26 28 2a 2b 2c 2d 2e 2f
val 97 73 ff fe 80 00 00 00 00 00 02 00 00 ff
def 97 73 ff fe MM 00 MM 00 00 00 00 RR RR RR
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2 f4 f5
val 01 03 f0 06 02 0c 00 ff 00 00
def 01 03 f0 06 02 0e 00 ff 00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 01 03 78 07 03 3b
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 01 02 f8 03 00 00
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard / mouse)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 00 43
def 01 00 60 00 64 01 0c 83
LDN 0x07 (GPIO 1)
idx 30 60 61 62 63 64 65 70 72 e0 e1 e2 e3 e4 e5 e6 e7 f1
val 01 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 01 00
def 00 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 01 00
LDN 0x08 (GPIO 2)
idx 30 60 61 70 72 e8 e9 ea eb ec ed ee f0 f1 f2 f3 f4
val 01 00 00 00 00 01 01 01 01 01 01 01 00 ff 00 00 02
def 00 00 00 00 00 01 01 01 01 01 01 01 00 RR 00 00 00
LDN 0x09 (GPIO 3)
idx 30 60 61 62 63 64 65 70 72 e0 e1 e2 e3 e4 e5 e6 e7 f1
val 00 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 01 00
def 00 00 00 00 00 00 00 00 00 01 01 01 01 01 01 01 01 00
LDN 0x0a (ACPI)
idx 30 60 61 62 63 64 65 70 e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 fe ff
val 00 00 00 00 00 00 00 00 60 00 00 00 00 80 00 0f 3f 00 00 00 00 00 00
def 00 00 00 00 00 00 00 00 00 00 NA MM RR 00 00 00 00 00 00 00 00 RR RR
Hardware monitor (0x0004)
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
PCI device 1106:0686 not found.
More information about the flashrom
mailing list