[flashrom] [PATCH] Board enable for P4P800

[Michael Karcher]

lspci/superiotool:
  http://www.coreboot.org/pipermail/flashrom/2010-August/004436.html

This goes the safe route of adding a match for the P4P800 that does not
match the P4P800-E Deluxe which is already in.  It seems quite likely that
the whole P4P800 family could use the same board enable with one generic
board enable match, though.

This match uses host bridge + audio, because all other IDs match the
P4P800-E Deluxe board, as reported in
 http://www.e-monkeys.de/Everest-Bericht.txt

Signed-off-by: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>
---
 board_enable.c |    2 ++
 print.c        |    1 +
 2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board_enable.c b/board_enable.c
index 5e0294b..d6da14b 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -1315,6 +1315,7 @@ static int intel_ich_gpio19_raise(void)
  * Suited for:
  *  - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2
  *  - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5
+ *  - ASUS P4P800: Intel socket478 + 865PE + ICH5R
  *  - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R
  *  - ASUS P5PE-VM: Intel LGA775 + 865G + ICH5
  *  - Samsung Polaris 32: socket478 + 865P + ICH5
@@ -1768,6 +1769,7 @@ const struct board_pciid_enable board_pciid_enables[] = {
 	{0x8086, 0x1a30, 0x1043, 0x8070,  0x8086, 0x244b, 0x1043, 0x8028, NULL,          NULL,         NULL,          "ASUS",        "P4B266",                0,   OK, intel_ich_gpio22_raise},
 	{0x8086, 0x1A30, 0x1043, 0x8088,  0x8086, 0x24C3, 0x1043, 0x8089, NULL,          NULL,         NULL,          "ASUS",        "P4B533-E",              0,   NT, intel_ich_gpio22_raise},
 	{0x8086, 0x24D3, 0x1043, 0x80A6,  0x8086, 0x2578, 0x1043, 0x80F6, NULL,          NULL,         NULL,          "ASUS",        "P4C800-E Deluxe",       0,   OK, intel_ich_gpio21_raise},
+	{0x8086, 0x2570, 0x1043, 0x80F2,  0x8086, 0x24D5, 0x1043, 0x80F3, NULL,          NULL,         NULL,          "ASUS",        "P4P800",                0,   OK, intel_ich_gpio21_raise},
 	{0x8086, 0x2570, 0x1043, 0x80F2,  0x105A, 0x3373, 0x1043, 0x80F5, NULL,          NULL,         NULL,          "ASUS",        "P4P800-E Deluxe",       0,   OK, intel_ich_gpio21_raise},
 	{0x8086, 0x2570, 0x1043, 0x80A5,  0x105A, 0x24D3, 0x1043, 0x80A6, NULL,          NULL,         NULL,          "ASUS",        "P4SD-LA",               0,   NT, intel_ich_gpio32_raise},
 	{0x1039, 0x0661, 0x1043, 0x8113,  0x1039, 0x5513, 0x1043, 0x8087, NULL,          NULL,         NULL,          "ASUS",        "P4S800-MX",             512, OK, w836xx_memw_enable_2e},
diff --git a/print.c b/print.c
index d8ba1ec..d48b7fb 100644
--- a/print.c
+++ b/print.c
@@ -348,6 +348,7 @@ const struct board_info boards_known[] = {
 	B("ASUS",	"P4B266",		1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
 	B("ASUS",	"P4B266-LM",		1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
 	B("ASUS",	"P4C800-E Deluxe",	1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL),
+	B("ASUS",	"P4P800",		1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL),
 	B("ASUS",	"P4P800-E Deluxe",	1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL),
 	B("ASUS",	"P4SD-LA",		1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL),
 	B("ASUS",	"P5A",			1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
-- 
1.7.1