[flashrom] Urgent: Flash part would be destroied by flashrom 0.9.2 once manager application is running.

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Fri Aug 13 03:25:33 CEST 2010


Hi Hony,

my suspicion is that either the third party application may access flash
regions between 0xFFC00000 and 0xFFFFFFFF or that the builtin management
engine in the southbridge may be asked by the third party application to
access those flash regions or run those commands.

You wrote that the problem does not exist if the third party application
(IBM UpdateXpress System Pack Installer) is not running. I see three
ways to handle this:
- Always terminate UpdateXpress before running flashrom.
- Have flashrom detect a running UpdateXpress instance and freeze it as
long as it accesses flash.
- Ask IBM to modify UpdateXpress in a way that does not access flash
unless explicitly requested.

As an alternative, we could add paranoid checks to the SB600 SPI driver
and hope that those checks will help detect the issue. Once we detect
the issue, we can print a warning and tell the user to stop all other
programs accessing the flash.

I will send a SB600 paranoid checks patch as reply to this mail.

Regards,
Carl-Daniel


On 12.08.2010 09:19, Hony.Chiang at mic.com.tw wrote:
> Hi Daniel,
>
>  
>
> Here is verbose log about SPI registers for reference.
>
>  
>
> Best Regards,
>
> Hony
>
> ________________________________
>
> From: hony.chiang (江昆仲 - MIC) 
> Sent: Wednesday, August 11, 2010 11:23 PM
> To: Carl-Daniel Hailfinger
> Cc: flashrom at flashrom.org; hony.chiang (江昆仲 - MIC)
> Subject: RE: [flashrom] Urgent: Flash part would be destroied by flashrom 0.9.2 once manager application is running.
>
>  
>
> Hi Daniel, 
>
>  
>
> Thanks for your quick response. Please kindly see my answers with blue texts  as below and share you my experiments today.
>
> I use AMD HDT hardware ICE to interrupt CPU for examining data on physical address 0xFEC10000 ~ 0xFEC100F used by SPI host controller registers today. They are changed once flashrom is running, and I can also capture SPI opcode commands on 0xFEC10000 address. However, they are fixed even though 3rd application is running. It means that registers are not overwritten by this application. I have added code to set process prority -20 in flashrom, but the failure is still there.
>
>  
>
> Best regards,
>
> Hony 
>
> ________________________________
>
> From: Carl-Daniel Hailfinger [mailto:c-d.hailfinger.devel.2006 at gmx.net]
> Sent: 2010/8/11 [星期三] 下午 09:05
> To: hony.chiang (江昆仲 - MIC)
> Cc: flashrom at flashrom.org
> Subject: Re: [flashrom] Urgent: Flash part would be destroied by flashrom 0.9.2 once manager application is running.
>
> Hi Hony,
>
> we will help you.
>
> On 11.08.2010 04:27, Hony.Chiang at mic.com.tw wrote:
>   
>> I get the serious problem on flashrom 0.9.2 on our server systems. We always have to run 3rd party manager application to call up flashrom for BIOS upgrade.
>>     
>
> Can you tell us the name of the manager application you are using?
>
> UpdateXpress System Pack Installer through a graphical user interface (GUI).
> http://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/index.jsp?topic=/uxspi/uspi_r_using_compare_update.html
>
>
>   
>> However, flashrom would be failed on “Verifying flash” step because some of programmed data in flash part is different with ones in golden ROM image file on random offset addresses. This defect occurs on Red Hat 5 x64, SLES 10 x64 and SLES 11 x64. If I run flashrom tool manually without this 3rd application, it would always flash SPI part successfully.
>>     
>
> This is good. It means that flashrom works fine if nothing else accesses
> the flash chip.
>
>
>   
>> Due to the 3rd party application is confidential, it can not be provided to you for defect reproduction.
>>
>>
>> Q1: May I suspect that expected data that is written to mapped virtual memory space by flashrom is overwritten or interfered by other process from 3rd application before SPI host controller operates these data to SPI ROM?
>>
>> Q2: May I suspect that expected data that is written to mapped virtual memory space by flashrom is not sync to physical memory space immediately when SPI host controller operates these data to SPI ROM?
>>  
>>     
>
> flashrom does not write to the mapped memory space of the flash chip on
> SP5100. flashrom uses only the SPI host controller registers to
> read/write. If any other software accesses (read or write) the mapped
> memory space of the flash chip or the SPI host controller registers at
> the same time, the SPI host controller registers will change in
> unexpected ways. This can lead to corruption of the flash chip or
> corruption of reads.
>
>
>   
>> Q3: In order to prevent other process to interfere /dev/mem, mapped virtual memory space or physical memory space that flashrom uses, would you have any idea or some slice codes to lock them during flashrom operation?
>>  
>>     
>
> Locking under most operating systems is not mandatory, and this means
> even if flashrom asks for a lock, all other applications can ignore the
> lock. I don't know any application which does locking on /dev/mem
> because that might interfere with X.org graphics and other software.
>
>
>   
>> Q4: Would you have any idea to trace the root cause interfered flashrom?
>>  
>>     
>
> I wrote a patch which should be able to detect interference from other
> applications. I will send it later once it is tested.
>
> Thank you. I will try it to give you more inputs.
>
>   
>> Verbose message:
>> Programming flash done.
>> COMPLETE.
>> Verifying flash... VERIFY FAILED at 0x00017ca4! Expected=0xff, Read=0x25, failed
>> byte count from 0x00000000-0x003fffff: 0x3a
>>
>> Syntax:
>> ./flashrom –w 24a.rom
>>
>> Hardware configuration:
>> MB: AMD platform solution
>> South Bridge: AMD SP5100
>> Flash part: ST M25P32
>>
>> NOS:
>> Reg Hat 5 X86_X64
>> SLES 10 X86_X64
>> SLES 11 X86_X64
>>  
>>     
>
> Could you please send the output of "flashrom -V" so I can check the
> contents of some SP5100 registers? Thanks.
> I will capture message with -V parameter on my lab tomorrow, and will provide you output.
> Regards,
> Carl-Daniel
>
> --
> http://www.hailfinger.org/
>
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom


-- 
http://www.hailfinger.org/





More information about the flashrom mailing list