[flashrom] Flashing of Epox 8RDA3+ Phoenix BIOS failed - ERASE FAILED

Joshua Roys roysjosh at gmail.com
Sun Aug 8 19:02:49 CEST 2010


On Sat, Aug 7, 2010 at 7:42 AM, Johannes Schüth <j.schueth at jotschi.de> 
wrote:
> Hi,
>
> i just tried to flash my Epox 8RDA3+ Motherboard

[re-adding list to CC]

Hello,

Your board should have already been supported by flashrom.  Your
output of lspci appears to be missing some entries, so it's difficult
to tell why it wasn't matched.  If you want to check yourself, look
around line 1919 of board_enable.c for your board name "8RDA3+" and
then compare lspci entries.  There are two sets of four hex ID numbers
on that line; the PCI manufacturer and device ID, and then the
subsystem manufacturer and device ID.  Both sets of four should have
matched two devices on your board, but apparently didn't.  Or you can
send the output again and someone can take a look at it.

Thanks,

Josh




More information about the flashrom mailing list