[flashrom] M4A79T partially compatible
Uwe Hermann
uwe at hermann-uwe.de
Sat Aug 7 16:10:36 CEST 2010
[Forwarding answer to mailing list]
> From: Michael Cole <michaelcole at michaelcole.com>
> To: Uwe Hermann <uwe at hermann-uwe.de>
> Subject: Re: [flashrom] M4A79T partially compatible
>
> Hi Uwe,
>
> Yes, that was the partially. I reflashed with the mobo utility, and got the
> same thing.
>
> Thanks again,
Thanks for the logs!
> Mike
>
> michael at mc-desktop:~$ lspci -nnvvvxxx
> 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual
> slot PCI-e_GFX and HT3 K8 part [1002:5956]
> Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot
> PCI-e_GFX and HT3 K8 part [1002:5956]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Region 3: Memory at <ignored> (64-bit, non-prefetchable)
> Capabilities: <access denied>
> 00: 02 10 56 59 06 00 30 22 00 00 00 06 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 56 59
> 30: 00 00 00 00 <skype:00000000?call> c4 00 00 00 00 00 00 00 00 00 00 00
>
> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge
> (external gfx0 port A) [1002:5978]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: f8000000-fbffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 02 10 78 59 07 05 10 00 00 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
> 20: 00 f8 f0 fb 01 d0 f1 df 00 00 00 00 00 00 00 00<skype:0000000000000000?call>
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 1b 00
>
> 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
> express gpp port C) [1002:597c]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: f7f00000-f7ffffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 02 10 7c 59 07 05 10 00 00 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 03 03 00 d1 d1 00 00
> 20: f0 f7 f0 f7 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 07 00
>
> 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
> express gpp port D) [1002:597d]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: f7e00000-f7efffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
> 00: 02 10 7d 59 07 05 10 00 00 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 02 00 c1 c1 00 00
> 20: e0 f7 e0 f7 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 07 00
>
> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
> Controller [IDE mode] [1002:4390] (prog-if 01)
> Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
> [1002:4390]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 27
> Region 0: I/O ports at b000 [size=8]
> Region 1: I/O ports at a000 [size=4]
> Region 2: I/O ports at 9000 [size=8]
> Region 3: I/O ports at 8000 [size=4]
> Region 4: I/O ports at 7000 [size=16]
> Region 5: Memory at f7dfe400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> Kernel modules: ahci
> 00: 02 10 90 43 07 05 30 02 00 01 06 01 10 40 00 00
> 10: 01 b0 00 00 01 a0 00 00 01 90 00 00 01 80 00 00
> 20: 01 70 00 00 00 <skype:0170000000?call> e4 df f7 00 00 00 00 02 10 90 43
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
>
> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller [1002:4397] (prog-if 10)
> Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
> [1002:4397]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f7df6000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 97 43 06 01 <skype:021097430601?call> a0 02 00 10 03 0c 10 40 80
> 00
> 10: 00 60 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 97 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
>
> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398] (prog-if 10)
> Subsystem: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f7df7000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 98 43 17 01 <skype:021098431701?call> a0 02 00 10 03 0c 10 40 00
> 00
> 10: 00 70 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 98 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
>
> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
> Controller [1002:4396] (prog-if 20)
> Subsystem: ATI Technologies Inc Device [1002:4397]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at f7dfe800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> 00: 02 10 96 43 16 01 <skype:021096431601?call> b0 02 00 20 03 0c 10 40 00
> 00
> 10: 00 e8 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 97 43
> 30: 00 00 00 00 <skype:00000000?call> c0 00 00 00 00 00 00 00 0a 02 00 00
>
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller [1002:4397] (prog-if 10)
> Subsystem: ATI Technologies Inc Device [1002:4398]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at f7dfc000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 97 43 06 01 <skype:021097430601?call> a0 02 00 10 03 0c 10 40 80
> 00
> 10: 00 c0 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 98 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
>
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398] (prog-if 10)
> Subsystem: ATI Technologies Inc Device [1002:4399]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at f7dfd000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 98 43 17 01 <skype:021098431701?call> a0 02 00 10 03 0c 10 40 00
> 00
> 10: 00 d0 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 99 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
>
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
> Controller [1002:4396] (prog-if 20)
> Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
> [1002:4396]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at f7dfec00 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> 00: 02 10 96 43 16 01 <skype:021096431601?call> b0 02 00 20 03 0c 10 40 00
> 00
> 10: 00 ec df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 96 43
> 30: 00 00 00 00 <skype:00000000?call> c0 00 00 00 00 00 00 00 0a 02 00 00
>
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
> [1002:4385] (rev 3c)
> Subsystem: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort+ <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel modules: i2c-piix4
> 00: 02 10 85 43 03 04 30 12 3c 00 05 0c 00 00 80 00 <skype:00008000?call>
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 85 43
> 30: 00 00 00 00 <skype:00000000?call> b0 00 00 00 00 00 00 00 00 00 00 00
>
> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
> Controller [1002:439c] (prog-if 8a [Master SecP PriP])
> Subsystem: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at ff00 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: pata_atiixp
> Kernel modules: pata_atiixp
> 00: 02 10 9c 43 05 00 30 02 00 8a 01 01 00 40 00 00<skype:010100400000?call>
> 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
> 20: 01 ff 00 00 00 00 00 00 00 00 00 00 02 10 9c 43
> 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 01 00 00
>
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
> [1002:4383]
> Subsystem: ASUSTeK Computer Inc. Device [1043:8357]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin ? routed to IRQ 16
> Region 0: Memory at f7df8000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
> 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00
> 10: 04 80 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 57 83
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 00 00 00
>
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
> controller [1002:439d]
> Subsystem: ATI Technologies Inc Device [1002:4383]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> 00: 02 10 9d 43 0f 00 20 02 00 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 83 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
> [1002:4384] (prog-if 01)
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 00: 02 10 84 43 05 01 <skype:021084430501?call> a0 02 00 01 04 06 00 40 81
> 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 22
> 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00
>
> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
> Controller [1002:4399] (prog-if 10)
> Subsystem: ATI Technologies Inc Device [1002:4396]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at f7dff000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 99 43 06 01 <skype:021099430601?call> a0 02 00 10 03 0c 10 40 00
> 00
> 10: 00 f0 df f7 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 96 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] HyperTransport Configuration [1022:1200]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] Address Map [1022:1201]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] DRAM Controller [1022:1202]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Kernel modules: amd64_edac_mod
> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] Miscellaneous Control [1022:1203]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 <skype:00000000?call> f0 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] Link Control [1022:1204]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. Device
> [1106:3403] (prog-if 10)
> Subsystem: ASUSTeK Computer Inc. Device [1043:8384]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at f7eff800 (64-bit, non-prefetchable) [size=2K]
> Region 2: I/O ports at c800 [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ohci1394
> Kernel modules: firewire-ohci, ohci1394
> 00: 06 11 03 34 07 01 10 00 00 10 00 0c 10 00 00 00
> 10: 04 f8 ef f7 00 00 00 00 01 c8 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 84 83
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
> 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
> Subsystem: ASUSTeK Computer Inc. Device [1043:8385]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 28
> Region 0: I/O ports at d800 [size=256]
> Region 2: Memory at f7fff000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at f7fc0000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
> 00: ec 10 68 81 07 05 10 00 01 00 00 02 10 00 00 00
> 10: 01 d8 00 00 00 00 00 00 04 f0 ff f7 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 85 83
> 30: 00 00 fc f7 40 00 00 00 00 00 00 00 0b 01 00 00
>
> 04:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce
> 9600 GT] [10de:0622] (rev a1)
> Subsystem: ASUSTeK Computer Inc. Device [1043:82fc]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
> Region 5: I/O ports at ec00 [size=128]
> [virtual] Expansion ROM at faf80000 [disabled] [size=512K]
> Capabilities: <access denied>
> Kernel driver in use: nvidia
> Kernel modules: nvidia-current, nvidiafb, nouveau
> 00: de 10 22 06 07 00 10 00 a1 00 00 03 00 00 00 00
> 10: 00 00 00 fb 0c 00 00 d0 00 00 00 00 04 00 00 f8
> 20: 00 00 00 00 01 <skype:0000000001?call> ec 00 00 00 00 00 00 43
> 10<skype:0000000000004310?call>fc 82
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
>
> michael at mc-desktop:~$ sudo superiotool -deV
> superiotool r3844
> Probing for ALi Super I/O at 0x3f0...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for ALi Super I/O at 0x370...
> Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
> Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
> Found ITE IT8720F (id=0x8720, rev=0x2) at 0x2e
> No dump available for this Super I/O
> Environment controller (0x0295)
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=standard) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
> Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
> Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
> Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
> Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> michael at mc-desktop:~$
Uwe.
--
http://hermann-uwe.de | http://sigrok.org
http://randomprojects.org | http://unmaintained-free-software.org
More information about the flashrom
mailing list