[flashrom] summary for XW9400 (Tyan OEM S2915-E)
Nils-Helge Garli Hegvik
nilsga at gmail.com
Wed Apr 7 18:56:24 CEST 2010
Hi!
Summary for the XW9400 debug session we just recently had on freenode.
Don't hesitate to contact me again if you need any more information.
Regards,
Nils-Helge Garli Hegvik
-------------- next part --------------
flashrom v0.9.1-r991 on Linux 2.6.26-2-amd64 (x86_64), built with libpci 3.0.0, GCC 4.3.2
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "HP xw9400 Workstation"
DMI string system-version: " "
DMI string baseboard-manufacturer: "Hewlett-Packard"
DMI string baseboard-product-name: "0A1Ch"
DMI string baseboard-version: "E"
DMI string chassis-type: "Mini Tower"
Found chipset "NVIDIA MCP55", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 1299M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 10008 us, OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Found chip "SST SST49LF080A" (1024 KB, LPC) at physical address 0xfff00000.
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for EON unknown EON SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
===
This flash part has status UNTESTED for operations: ERASE WRITE
Please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested.
Thanks for your help!
===
No operations were specified.
-------------- next part --------------
flashrom v0.9.1-r991 on Linux 2.6.26-2-amd64 (x86_64), built with libpci 3.0.0, GCC 4.3.2
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "HP xw9400 Workstation"
DMI string system-version: " "
DMI string baseboard-manufacturer: "Hewlett-Packard"
DMI string baseboard-product-name: "0A1Ch"
DMI string baseboard-version: "E"
DMI string chassis-type: "Mini Tower"
Found chipset "NVIDIA MCP55", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 1299M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 10012 us, OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x20, id2 0x20, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for EON unknown EON SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
-------------- next part --------------
0000:00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 08 dc e0 01 22 20 11 11 d0 00 00 00
50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 35 0a 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
90: 78 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 00 00 d0 fe fa 3e ff 00 de fd 00 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff c5 80 00 00 00 00 64 19 06 00 00 10
80: 09 20 00 43 cd 28 00 10 ff 00 00 01 ff 00 00 00
90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
a0: a3 00 10 10 00 00 00 00 00 04 cb 04 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 50 28 00 fe fd e1 00 b0
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
0000:00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 4000 [size=64]
Region 5: I/O ports at 4040 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 40 00 00 41 40 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 f8 00 00 01 f9 00 00 01 fa 00 00 00 f0 ef fd
70: 01 00 00 00 00 00 30 e8 00 00 00 00 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 64 15 05 00 a5 03 00 07 80 30 00 00 77 44 44 11
f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
0000:00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e8344000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 40 34 e8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 3c 10 fe 12 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 03 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
0000:00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at e834a000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
10: 00 a0 34 e8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
40: 3c 10 fe 12 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 04 00
80: 01 00 02 fe 00 80 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 44 44 00 00 00 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
0000:00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 4080 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: AMD_IDE
Kernel modules: ide-pci-generic, amd74xx, ata_generic
00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 40 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 3c 10 fe 12 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 00 00 00 00 00 00 a8 a8 20 20 0f 00 ff 20
60: 00 00 c0 c0 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 80 d3 37 00 00 02 08 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
0000:00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 40c0 [size=8]
Region 1: I/O ports at 4100 [size=4]
Region 2: I/O ports at 40c8 [size=8]
Region 3: I/O ports at 4104 [size=4]
Region 4: I/O ports at 4090 [size=16]
Region 5: Memory at e8345000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: sata_nv
Kernel modules: ide-pci-generic, ata_generic, sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: c1 40 00 00 01 41 00 00 c9 40 00 00 05 41 00 00
20: 91 40 00 00 00 50 34 e8 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 de 5f 1f fd 00 00 a9 15 c7 76 a7 fb
90: 00 00 4b 28 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 0a 00 02 65 42 00 00 00 00 00 00 00 0f 00 20 00
e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 50 07
f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
0000:00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 40d0 [size=8]
Region 1: I/O ports at 4108 [size=4]
Region 2: I/O ports at 40d8 [size=8]
Region 3: I/O ports at 410c [size=4]
Region 4: I/O ports at 40a0 [size=16]
Region 5: Memory at e8346000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: sata_nv
Kernel modules: ide-pci-generic, ata_generic, sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: d1 40 00 00 09 41 00 00 d9 40 00 00 0d 41 00 00
20: a1 40 00 00 00 60 34 e8 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 f5 ff b6 f4 00 00 5d 38 a5 fe fb af
90: 00 00 59 2f 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 0a 00 02 65 42 00 00 00 00 00 00 00 0f 00 00 00
e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 10 00
f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
0000:00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 23
Region 0: I/O ports at 40e0 [size=8]
Region 1: I/O ports at 4110 [size=4]
Region 2: I/O ports at 40e8 [size=8]
Region 3: I/O ports at 4114 [size=4]
Region 4: I/O ports at 40b0 [size=16]
Region 5: Memory at e8347000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: sata_nv
Kernel modules: ide-pci-generic, ata_generic, sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: e1 40 00 00 11 41 00 00 e9 40 00 00 15 41 00 00
20: b1 40 00 00 00 70 34 e8 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 5f 9d f6 81 00 00 28 14 ce bb e7 f6
90: 00 00 a3 30 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 0a 00 02 76 42 00 00 00 00 00 00 00 e4 2a 52 04
e0: 0a 00 02 76 42 00 00 00 00 00 00 00 0f 00 f0 07
f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00
0000:00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e8200000-e82fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 02
20: 20 e8 20 e8 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 02 0a
40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00
50: 00 00 fe 7f 00 00 00 00 ff 1f ff 1f 03 00 84 00
60: 00 00 85 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at e8340000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
10: 00 00 34 e8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
40: 3c 10 fe 12 01 50 02 c0 00 00 00 00 01 01 0f 00
50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00
0000:00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at e8348000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 40f0 [size=8]
Region 2: Memory at e834a100 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at e834a300 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0f00c Data: 41b1
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
10: 00 80 34 e8 f1 40 00 00 00 a1 34 e8 00 a3 34 e8
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 0c 00 00 00
50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b1 41 00 00
60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
0000:00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e8349000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 40f8 [size=8]
Region 2: Memory at e834a200 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at e834a310 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00: de 10 73 03 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 90 34 e8 f9 40 00 00 00 a2 34 e8 10 a3 34 e8
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
40: 3c 10 fe 12 01 70 02 fe 00 00 00 00 0c 00 00 00
50: 05 6c 86 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
0000:00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=2b, subordinate=2d, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e8100000-e81fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0f00c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Capabilities: [160] Advanced Error Reporting <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 2b 2d 00 f1 01 00 20
20: 10 e8 10 e8 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 41 3c 11 02
90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=18, subordinate=18, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e8000000-e80fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0f00c Data: 4159
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Capabilities: [160] Advanced Error Reporting <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: de 10 77 03 07 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 18 18 00 31 31 00 00
20: 00 e8 00 e8 01 e0 f1 e7 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0a 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 04 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 05 00 04 02 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 10 00 03 00 e4 02 00 00 20 c8 0e 0f 14 02 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 00 0f 00 07 00 00 00 00 03 00 00 00 00 00 00 00
a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
b0: 36 61 26 01 00 00 00 00 03 00 00 00 00 00 00 00
c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
d0: 56 02 51 02 00 00 00 00 07 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
90: 03 00 e0 00 20 3f e8 00 03 40 e8 00 01 5f e8 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 13 30 00 00 20 40 00 00 03 10 00 00 01 20 00 00
d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 e0 3f 78 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 60 00 00 00 00 00 00 00 24 ca 69 ef 20 13 82 00
90: 10 28 08 00 6a 80 40 64 39 00 00 80 00 00 00 00
a0: eb 02 00 ef 00 00 00 00 00 00 00 00 00 00 00 00
b0: 1a 19 4e 18 9c 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 44 00 d0 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 10 10 12 00 c1 45 bf 00
60: 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 06 a7 e2 04 10 27 60 20 26 26 25 00
e0: 00 00 00 00 24 1b 74 00 1b 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00
0000:00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 08 04 01 00 01 01 09 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 11 00 03 00 e4 00 00 00 20 c8 0e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 56 02 51 02 00 40 00 00 07 00 00 00 00 00 00 00
a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
b0: 00 0f 00 07 00 00 00 00 03 00 00 00 00 00 00 00
c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
d0: 36 61 26 01 00 00 00 00 03 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
90: 03 00 e0 00 20 3f e8 00 03 40 e8 00 01 5f e8 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 13 30 00 00 20 40 00 00 03 10 00 00 01 20 00 00
d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 00
90: 00 00 00 00 00 40 00 00 00 00 00 00 65 5f ff 1f
a0: 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
b0: 25 d4 4b 18 9c 00 00 00 34 98 1a 3f fb ee 0f 7f
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 6c 97 6f bf dd be 72 ef bf ef 18 0f cf 14 0b 1f
e0: 54 fb 2f de ff ce 07 f7 ca cf 16 6b fe 20 7e dc
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6f
60: d7 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 13 1e 00 00 40 9b fa ff 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 06 a7 e2 04 10 27 80 20 25 26 26 00
e0: 00 00 00 00 24 1b 7f 00 1b 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00
0000:01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3750ns min, 3750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e8204000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00: 4c 10 23 80 06 01 10 02 00 10 00 0c 10 20 00 00
10: 00 40 20 e8 00 00 20 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 0f 0f
40: 00 00 00 00 01 00 42 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 8f 00 00 00
f0: 37 80 00 00 86 f0 00 00 ff ff ff ff 00 00 00 00
0000:18:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B64 [FireGL V3100 (PCIE)] [1002:5b64] (rev 80) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device [1002:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at e8000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8020000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Kernel modules: radeonfb
00: 02 10 64 5b 07 00 10 00 80 00 00 03 10 00 80 00
10: 08 00 00 e0 01 30 00 00 00 00 00 e8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 01
50: 01 58 02 06 00 00 00 00 10 80 01 00 60 02 00 00
60: 14 09 00 00 01 1d 00 00 00 00 01 11 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:18:00.1 Display controller [0380]: ATI Technologies Inc RV370 5B64 [FireGL V3100 (PCIE)] (Secondary) [1002:5b74] (rev 80)
Subsystem: ATI Technologies Inc Device [1002:0103]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at e8010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
00: 02 10 74 5b 07 00 10 00 80 00 80 03 10 00 00 00
10: 00 00 01 e8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 02 06 00 00 00 00 10 00 01 00 40 02 00 00
60: 04 00 00 00 01 1d 00 00 00 00 01 11 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:2b:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=2b, secondary=2c, subordinate=2c, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [54] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=2b:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=32 CommitmentLimit=32
Downstream: Capacity=16 CommitmentLimit=16
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [100] Advanced Error Reporting <?>
Kernel modules: shpchp
00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 2b 2c 2c 20 f1 01 20 24
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
40: 10 54 71 00 01 00 00 00 04 20 0a 00 81 6c 02 00
50: 00 00 41 00 07 64 c3 00 00 2b 00 00 20 00 20 00
60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 0c 00 19 1f 00 00 00 00
90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:2b:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at e8100000 (64-bit, non-prefetchable) [size=128]
Bus: primary=2b, secondary=2d, subordinate=2d, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [54] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=2b:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=32 CommitmentLimit=32
Downstream: Capacity=16 CommitmentLimit=16
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0f00c Data: 41a9
Capabilities: [7c] Hot-plug capable
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: shpchp
Kernel modules: shpchp
00: 33 10 25 01 07 04 10 00 06 00 04 06 10 00 81 00
10: 04 00 10 e8 00 00 00 00 2b 2d 2d 20 f1 01 20 24
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 02 00
40: 10 54 71 00 01 00 00 00 04 20 00 00 81 6c 02 00
50: 00 00 41 00 07 64 03 00 01 2b 00 00 20 00 20 00
60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 81 00
70: 0c f0 e0 fe 00 00 00 00 a9 41 00 00 0c 00 09 00
80: 3f 3e 00 60 00 00 00 00 00 00 00 00 00 00 00 00
90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0001:40:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 35 0a 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
90: 78 00 40 90 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0001:40:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge [10de:0361] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 1: Memory at e8500000 (32-bit, non-prefetchable) [size=4K]
00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 50 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff c7 80 00 00 00 00 46 20 00 00 00 c0
80: 00 00 00 00 00 00 00 00 f0 00 00 01 80 00 00 00
90: 00 00 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
0001:40:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:12fe]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 2000 [size=64]
Region 5: I/O ports at 2040 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 20 00 00 41 20 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 e8 00 00 01 e9 00 00 01 ea 00 00 00 00 00 00
70: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: e6 16 05 00 b5 03 00 07 80 ff 57 00 61 44 44 11
f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
0001:40:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=6b, subordinate=6b, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e8400000-e84fffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0f00c Data: 4161
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Capabilities: [160] Advanced Error Reporting <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 40 6b 6b 00 11 11 00 00
20: 40 e8 40 e8 01 f4 01 f4 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 41 3c 11 02
90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0001:6b:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
Subsystem: LSI Logic / Symbios Logic Device [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at e8410000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at e8400000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f4000000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000
Capabilities: [100] Advanced Error Reporting <?>
Kernel modules: mptsas
00: 00 10 58 00 07 00 10 00 08 00 00 01 10 00 00 00
10: 01 10 00 00 04 00 41 e8 00 00 00 00 04 00 40 e8
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 10
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 68 02 06 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 6b 00 00 10 98 01 00 25 00 00 00
70: 14 28 00 00 81 0c 00 00 00 00 41 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 05 b0 80 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 11 00 00 00 01 20 00 00 01 30 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-------------- next part --------------
superiotool r3125
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0x0000, rev=0x00
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e...
Failed. Returned data: id=0x8100, rev=0x1
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0x8100, rev=0x1
Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
No dump available for this Super I/O
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Found SMSC FDC37N972 (id=0x0b, rev=0x00) at 0x4e
No dump available for this Super I/O
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
More information about the flashrom
mailing list