[flashrom] [commit] r737 - trunk
svn at flashrom.org
svn at flashrom.org
Wed Sep 30 20:29:55 CEST 2009
Author: uwe
Date: 2009-09-30 20:29:55 +0200 (Wed, 30 Sep 2009)
New Revision: 737
Added:
trunk/gfxnvidia.c
Modified:
trunk/Makefile
trunk/flash.h
trunk/flashrom.8
trunk/flashrom.c
trunk/pcidev.c
Log:
Add initial support for flashing some NVIDIA graphics cards.
The new option is '-p gfxnvidia', rest of the interface is as usual.
I tested a successful identify and read on a "RIVA TNT2 Model 64/Model 64 Pro"
card for now, erase and write did NOT work properly so far!
Please do not attempt to write/erase cards yet, unless you can recover!
In addition to the NVIDIA handling code it was required to call
programmer_shutdown() in a lot more places, otherwise the graphics card
will be disabled in the init function, but never enabled again as the
shutdown function is not called.
The shutdown handling may be changed to use atexit() later.
Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Luc Verhaegen <libv at skynet.be>
Modified: trunk/Makefile
===================================================================
--- trunk/Makefile 2009-09-28 13:15:16 UTC (rev 736)
+++ trunk/Makefile 2009-09-30 18:29:55 UTC (rev 737)
@@ -74,6 +74,9 @@
# Always enable 3Com NICs for now.
CONFIG_NIC3COM ?= yes
+# Always enable NVIDIA graphics cards for now.
+CONFIG_GFXNVIDIA ?= yes
+
# Always enable SiI SATA controllers for now.
CONFIG_SATASII ?= yes
@@ -107,6 +110,11 @@
OBJS += nic3com.o
endif
+ifeq ($(CONFIG_GFXNVIDIA), yes)
+FEATURE_CFLAGS += -D'GFXNVIDIA_SUPPORT=1'
+OBJS += gfxnvidia.o
+endif
+
ifeq ($(CONFIG_SATASII), yes)
FEATURE_CFLAGS += -D'SATASII_SUPPORT=1'
OBJS += satasii.o
Modified: trunk/flash.h
===================================================================
--- trunk/flash.h 2009-09-28 13:15:16 UTC (rev 736)
+++ trunk/flash.h 2009-09-30 18:29:55 UTC (rev 737)
@@ -88,6 +88,9 @@
#if NIC3COM_SUPPORT == 1
PROGRAMMER_NIC3COM,
#endif
+#if GFXNVIDIA_SUPPORT == 1
+ PROGRAMMER_GFXNVIDIA,
+#endif
#if DRKAISER_SUPPORT == 1
PROGRAMMER_DRKAISER,
#endif
@@ -437,6 +440,13 @@
uint8_t nic3com_chip_readb(const chipaddr addr);
extern struct pcidev_status nics_3com[];
+/* gfxnvidia.c */
+int gfxnvidia_init(void);
+int gfxnvidia_shutdown(void);
+void gfxnvidia_chip_writeb(uint8_t val, chipaddr addr);
+uint8_t gfxnvidia_chip_readb(const chipaddr addr);
+extern struct pcidev_status gfx_nvidia[];
+
/* drkaiser.c */
int drkaiser_init(void);
int drkaiser_shutdown(void);
Modified: trunk/flashrom.8
===================================================================
--- trunk/flashrom.8 2009-09-28 13:15:16 UTC (rev 736)
+++ trunk/flashrom.8 2009-09-30 18:29:55 UTC (rev 737)
@@ -140,6 +140,8 @@
.sp
.BR "* nic3com" " (for flash ROMs on 3COM network cards)"
.sp
+.BR "* gfxnvidia" " (for flash ROMs on NVIDIA graphics cards)"
+.sp
.BR "* drkaiser" " (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards)"
.sp
.BR "* satasii" " (for flash ROMs on Silicon Image SATA/IDE controllers)"
@@ -180,6 +182,7 @@
.sp
Currently the following programmers support this mechanism:
.BR nic3com ,
+.BR gfxnvidia ,
.BR satasii .
.sp
The it87spi programmer has an optional parameter which will set the I/O base
Modified: trunk/flashrom.c
===================================================================
--- trunk/flashrom.c 2009-09-28 13:15:16 UTC (rev 736)
+++ trunk/flashrom.c 2009-09-30 18:29:55 UTC (rev 737)
@@ -92,6 +92,25 @@
},
#endif
+#if GFXNVIDIA_SUPPORT == 1
+ {
+ .name = "gfxnvidia",
+ .init = gfxnvidia_init,
+ .shutdown = gfxnvidia_shutdown,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .chip_readb = gfxnvidia_chip_readb,
+ .chip_readw = fallback_chip_readw,
+ .chip_readl = fallback_chip_readl,
+ .chip_readn = fallback_chip_readn,
+ .chip_writeb = gfxnvidia_chip_writeb,
+ .chip_writew = fallback_chip_writew,
+ .chip_writel = fallback_chip_writel,
+ .chip_writen = fallback_chip_writen,
+ .delay = internal_delay,
+ },
+#endif
+
#if DRKAISER_SUPPORT == 1
{
.name = "drkaiser",
@@ -824,6 +843,9 @@
#if NIC3COM_SUPPORT == 1
print_supported_pcidevs(nics_3com);
#endif
+#if GFXNVIDIA_SUPPORT == 1
+ print_supported_pcidevs(gfx_nvidia);
+#endif
#if DRKAISER_SUPPORT == 1
print_supported_pcidevs(drkaiser_pcidev);
#endif
@@ -868,6 +890,7 @@
for (i = 0; i < ARRAY_SIZE(flashes) && flashes[i]; i++)
printf(" %s", flashes[i]->name);
printf("\nPlease specify which chip to use with the -c <chipname> option.\n");
+ programmer_shutdown();
exit(1);
} else if (!flashes[0]) {
printf("No EEPROM/flash device found.\n");
@@ -890,6 +913,7 @@
return read_flash(flashes[0], filename);
}
// FIXME: flash writes stay enabled!
+ programmer_shutdown();
exit(1);
}
@@ -935,12 +959,14 @@
if (!(read_it | write_it | verify_it | erase_it)) {
printf("No operations were specified.\n");
// FIXME: flash writes stay enabled!
+ programmer_shutdown();
exit(1);
}
if (!filename && !erase_it) {
printf("Error: No filename specified.\n");
// FIXME: flash writes stay enabled!
+ programmer_shutdown();
exit(1);
}
@@ -956,6 +982,7 @@
fprintf(stderr, "Erase is not working on this chip. ");
if (!force) {
fprintf(stderr, "Aborting.\n");
+ programmer_shutdown();
return 1;
} else {
fprintf(stderr, "Continuing anyway.\n");
@@ -963,11 +990,14 @@
}
if (erase_flash(flash)) {
emergency_help_message();
+ programmer_shutdown();
return 1;
}
} else if (read_it) {
- if (read_flash(flash, filename))
+ if (read_flash(flash, filename)) {
+ programmer_shutdown();
return 1;
+ }
} else {
struct stat image_stat;
@@ -976,6 +1006,7 @@
"and erase is needed for write. ");
if (!force) {
fprintf(stderr, "Aborting.\n");
+ programmer_shutdown();
return 1;
} else {
fprintf(stderr, "Continuing anyway.\n");
@@ -985,6 +1016,7 @@
fprintf(stderr, "Write is not working on this chip. ");
if (!force) {
fprintf(stderr, "Aborting.\n");
+ programmer_shutdown();
return 1;
} else {
fprintf(stderr, "Continuing anyway.\n");
@@ -992,14 +1024,17 @@
}
if ((image = fopen(filename, "r")) == NULL) {
perror(filename);
+ programmer_shutdown();
exit(1);
}
if (fstat(fileno(image), &image_stat) != 0) {
perror(filename);
+ programmer_shutdown();
exit(1);
}
if (image_stat.st_size != flash->total_size * 1024) {
fprintf(stderr, "Error: Image size doesn't match\n");
+ programmer_shutdown();
exit(1);
}
@@ -1008,6 +1043,7 @@
fclose(image);
if (numbytes != size) {
fprintf(stderr, "Error: Failed to read file. Got %ld bytes, wanted %ld!\n", numbytes, size);
+ programmer_shutdown();
return 1;
}
}
@@ -1022,12 +1058,14 @@
printf("Writing flash chip... ");
if (!flash->write) {
fprintf(stderr, "Error: flashrom has no write function for this flash chip.\n");
+ programmer_shutdown();
return 1;
}
ret = flash->write(flash, buf);
if (ret) {
fprintf(stderr, "FAILED!\n");
emergency_help_message();
+ programmer_shutdown();
return 1;
} else {
printf("COMPLETE.\n");
Added: trunk/gfxnvidia.c
===================================================================
--- trunk/gfxnvidia.c (rev 0)
+++ trunk/gfxnvidia.c 2009-09-30 18:29:55 UTC (rev 737)
@@ -0,0 +1,104 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2009 Uwe Hermann <uwe at hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include "flash.h"
+
+#define PCI_VENDOR_ID_NVIDIA 0x10de
+
+uint8_t *nvidia_bar;
+
+struct pcidev_status gfx_nvidia[] = {
+ {0x10de, 0x0010, PCI_NT, "NVIDIA", "Mutara V08 [NV2]" },
+ {0x10de, 0x0018, PCI_NT, "NVIDIA", "RIVA 128" },
+ {0x10de, 0x0020, PCI_NT, "NVIDIA", "RIVA TNT" },
+ {0x10de, 0x0028, PCI_NT, "NVIDIA", "RIVA TNT2/TNT2 Pro" },
+ {0x10de, 0x0029, PCI_NT, "NVIDIA", "RIVA TNT2 Ultra" },
+ {0x10de, 0x002c, PCI_NT, "NVIDIA", "Vanta/Vanta LT" },
+ {0x10de, 0x002d, PCI_OK, "NVIDIA", "RIVA TNT2 Model 64/Model 64 Pro" },
+ {0x10de, 0x00a0, PCI_NT, "NVIDIA", "Aladdin TNT2" },
+ {0x10de, 0x0100, PCI_NT, "NVIDIA", "GeForce 256" },
+ {0x10de, 0x0101, PCI_NT, "NVIDIA", "GeForce DDR" },
+ {0x10de, 0x0103, PCI_NT, "NVIDIA", "Quadro" },
+ {0x10de, 0x0110, PCI_NT, "NVIDIA", "GeForce2 MX" },
+ {0x10de, 0x0111, PCI_NT, "NVIDIA", "GeForce2 MX" },
+ {0x10de, 0x0112, PCI_NT, "NVIDIA", "GeForce2 GO" },
+ {0x10de, 0x0113, PCI_NT, "NVIDIA", "Quadro2 MXR" },
+ {0x10de, 0x0150, PCI_NT, "NVIDIA", "GeForce2 GTS/Pro" },
+ {0x10de, 0x0151, PCI_NT, "NVIDIA", "GeForce2 GTS" },
+ {0x10de, 0x0152, PCI_NT, "NVIDIA", "GeForce2 Ultra" },
+ {0x10de, 0x0153, PCI_NT, "NVIDIA", "Quadro2 Pro" },
+ {0x10de, 0x0200, PCI_NT, "NVIDIA", "GeForce 3 nFX" },
+ {0x10de, 0x0201, PCI_NT, "NVIDIA", "GeForce 3 nFX" },
+ {0x10de, 0x0202, PCI_NT, "NVIDIA", "GeForce 3 nFX Ultra" },
+ {0x10de, 0x0203, PCI_NT, "NVIDIA", "Quadro 3 DDC" },
+
+ {},
+};
+
+int gfxnvidia_init(void)
+{
+ uint32_t reg32;
+
+ get_io_perms();
+
+ io_base_addr = pcidev_init(PCI_VENDOR_ID_NVIDIA, PCI_BASE_ADDRESS_0,
+ gfx_nvidia, programmer_param);
+ io_base_addr += 0x300000;
+ printf("Detected NVIDIA I/O base address: 0x%x.\n", io_base_addr);
+
+ /* Allow access to flash interface (will disable screen). */
+ reg32 = pci_read_long(pcidev_dev, 0x50);
+ reg32 &= ~(1 << 0);
+ pci_write_long(pcidev_dev, 0x50, reg32);
+
+ nvidia_bar = physmap("NVIDIA", io_base_addr, 16 * 1024 * 1024);
+
+ buses_supported = CHIP_BUSTYPE_PARALLEL;
+
+ return 0;
+}
+
+int gfxnvidia_shutdown(void)
+{
+ uint32_t reg32;
+
+ /* Disallow access to flash interface (and re-enable screen). */
+ reg32 = pci_read_long(pcidev_dev, 0x50);
+ reg32 |= (1 << 0);
+ pci_write_long(pcidev_dev, 0x50, reg32);
+
+ free(programmer_param);
+ pci_cleanup(pacc);
+ release_io_perms();
+ return 0;
+}
+
+void gfxnvidia_chip_writeb(uint8_t val, chipaddr addr)
+{
+ mmio_writeb(val, nvidia_bar + addr);
+}
+
+uint8_t gfxnvidia_chip_readb(const chipaddr addr)
+{
+ return mmio_readb(nvidia_bar + addr);
+}
Modified: trunk/pcidev.c
===================================================================
--- trunk/pcidev.c 2009-09-28 13:15:16 UTC (rev 736)
+++ trunk/pcidev.c 2009-09-30 18:29:55 UTC (rev 737)
@@ -28,7 +28,8 @@
struct pci_filter filter;
struct pci_dev *pcidev_dev = NULL;
-uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, struct pcidev_status *devs)
+uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar,
+ struct pcidev_status *devs)
{
int i;
uint32_t addr;
@@ -37,12 +38,16 @@
if (dev->device_id != devs[i].device_id)
continue;
- /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */
+ /*
+ * Don't use dev->base_addr[x] (as value for 'bar'), won't
+ * work on older libpci.
+ */
addr = pci_read_long(dev, bar) & ~0x03;
printf("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n",
- devs[i].vendor_name, devs[i].device_name, dev->vendor_id,
- dev->device_id, dev->bus, dev->dev, dev->func);
+ devs[i].vendor_name, devs[i].device_name,
+ dev->vendor_id, dev->device_id, dev->bus, dev->dev,
+ dev->func);
if (devs[i].status == PCI_NT) {
printf("===\nThis PCI device is UNTESTED. Please "
@@ -57,7 +62,8 @@
return 0;
}
-uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, struct pcidev_status *devs, char *pcidev_bdf)
+uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar,
+ struct pcidev_status *devs, char *pcidev_bdf)
{
struct pci_dev *dev;
char *msg = NULL;
More information about the flashrom
mailing list