[flashrom] [RFC] Output and progress bars

[Carl-Daniel Hailfinger]

On 18.09.2009 16:06, Uwe Hermann wrote:
> Yep, too fast progress bar printing is also a problem on serial
> sometimes, it even caused some flashing to reproducibly fail for me,
> until I decreased the amount of stuff printed on the serial port.
>   

By the way, if you're using SB600 SPI and have a flash chip with
one-byte writing, you get ~150 MB debug output from the chipset driver
alone.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/