[flashrom] [PATCH] ICH SPI Preop handling

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Fri Sep 18 14:18:16 CEST 2009


Next try. I reworded the comment about ops/preops in the hope of making
it clearer. Thanks to FENG Yu Ning for the reviews.

The current ICH SPI preop handling is a hack which spews lots of
warnings, but still yields correct results.
With the multicommand infrastructure I introduced in r645, it became
possible to integrate ICH SPI preopcodes cleanly into the flashrom design.

The new code checks for every opcode in a multicommand array if it is a
preopcode. If yes, it checks if the next opcode is associated with that
preopcode and in that case it simply runs the opcode because the correct
preopcode will be run automatically before the opcode.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Index: flashrom-ich9_multicommand_preop/flash.h
===================================================================
--- flashrom-ich9_multicommand_preop/flash.h	(Revision 725)
+++ flashrom-ich9_multicommand_preop/flash.h	(Arbeitskopie)
@@ -498,7 +498,7 @@
 struct spi_programmer {
 	int (*command)(unsigned int writecnt, unsigned int readcnt,
 		   const unsigned char *writearr, unsigned char *readarr);
-	int (*multicommand)(struct spi_command *spicommands);
+	int (*multicommand)(struct spi_command *cmds);
 
 	/* Optimized functions for this programmer */
 	int (*read)(struct flashchip *flash, uint8_t *buf, int start, int len);
@@ -514,7 +514,7 @@
 int probe_spi_res(struct flashchip *flash);
 int spi_send_command(unsigned int writecnt, unsigned int readcnt,
 		const unsigned char *writearr, unsigned char *readarr);
-int spi_send_multicommand(struct spi_command *spicommands);
+int spi_send_multicommand(struct spi_command *cmds);
 int spi_write_enable(void);
 int spi_write_disable(void);
 int spi_chip_erase_60(struct flashchip *flash);
@@ -539,7 +539,7 @@
 uint32_t spi_get_valid_read_addr(void);
 int default_spi_send_command(unsigned int writecnt, unsigned int readcnt,
 			     const unsigned char *writearr, unsigned char *readarr);
-int default_spi_send_multicommand(struct spi_command *spicommands);
+int default_spi_send_multicommand(struct spi_command *cmds);
 
 /* 82802ab.c */
 int probe_82802ab(struct flashchip *flash);
@@ -565,7 +565,7 @@
 		    const unsigned char *writearr, unsigned char *readarr);
 int ich_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
 int ich_spi_write_256(struct flashchip *flash, uint8_t * buf);
-int ich_spi_send_multicommand(struct spi_command *spicommands);
+int ich_spi_send_multicommand(struct spi_command *cmds);
 
 /* it87spi.c */
 extern uint16_t it8716f_flashport;
Index: flashrom-ich9_multicommand_preop/spi.c
===================================================================
--- flashrom-ich9_multicommand_preop/spi.c	(Revision 725)
+++ flashrom-ich9_multicommand_preop/spi.c	(Arbeitskopie)
@@ -118,7 +118,7 @@
 						      writearr, readarr);
 }
 
-int spi_send_multicommand(struct spi_command *spicommands)
+int spi_send_multicommand(struct spi_command *cmds)
 {
 	if (!spi_programmer[spi_controller].multicommand) {
 		fprintf(stderr, "%s called, but SPI is unsupported on this "
@@ -126,7 +126,7 @@
 		return 1;
 	}
 
-	return spi_programmer[spi_controller].multicommand(spicommands);
+	return spi_programmer[spi_controller].multicommand(cmds);
 }
 
 int default_spi_send_command(unsigned int writecnt, unsigned int readcnt,
@@ -148,13 +148,12 @@
 	return spi_send_multicommand(cmd);
 }
 
-int default_spi_send_multicommand(struct spi_command *spicommands)
+int default_spi_send_multicommand(struct spi_command *cmds)
 {
 	int result = 0;
-	while ((spicommands->writecnt || spicommands->readcnt) && !result) {
-		result = spi_send_command(spicommands->writecnt, spicommands->readcnt,
-					  spicommands->writearr, spicommands->readarr);
-		spicommands++;
+	for (; (cmds->writecnt || cmds->readcnt) && !result; cmds++) {
+		result = spi_send_command(cmds->writecnt, cmds->readcnt,
+					  cmds->writearr, cmds->readarr);
 	}
 	return result;
 }
@@ -494,7 +493,7 @@
 int spi_chip_erase_60(struct flashchip *flash)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -518,7 +517,7 @@
 		return result;
 	}
 	
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n",
 			__func__);
@@ -540,7 +539,7 @@
 int spi_chip_erase_c7(struct flashchip *flash)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -564,7 +563,7 @@
 		return result;
 	}
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n", __func__);
 		return result;
@@ -596,7 +595,7 @@
 int spi_block_erase_52(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -614,7 +613,7 @@
 		.readarr	= NULL,
 	}};
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n",
 			__func__);
@@ -640,7 +639,7 @@
 int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -658,7 +657,7 @@
 		.readarr	= NULL,
 	}};
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n", __func__);
 		return result;
@@ -702,7 +701,7 @@
 int spi_block_erase_20(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -720,7 +719,7 @@
 		.readarr	= NULL,
 	}};
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n",
 			__func__);
@@ -779,7 +778,7 @@
 int spi_write_status_register(int status)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_EWSR_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_EWSR },
@@ -797,7 +796,7 @@
 		.readarr	= NULL,
 	}};
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n",
 			__func__);
@@ -808,7 +807,7 @@
 int spi_byte_program(int addr, uint8_t byte)
 {
 	int result;
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -826,7 +825,7 @@
 		.readarr	= NULL,
 	}};
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n",
 			__func__);
@@ -844,7 +843,7 @@
 		(address >> 8) & 0xff,
 		(address >> 0) & 0xff,
 	};
-	struct spi_command spicommands[] = {
+	struct spi_command cmds[] = {
 	{
 		.writecnt	= JEDEC_WREN_OUTSIZE,
 		.writearr	= (const unsigned char[]){ JEDEC_WREN },
@@ -873,7 +872,7 @@
 
 	memcpy(&cmd[4], bytes, len);
 
-	result = spi_send_multicommand(spicommands);
+	result = spi_send_multicommand(cmds);
 	if (result) {
 		fprintf(stderr, "%s failed during command execution\n",
 			__func__);
Index: flashrom-ich9_multicommand_preop/ichspi.c
===================================================================
--- flashrom-ich9_multicommand_preop/ichspi.c	(Revision 725)
+++ flashrom-ich9_multicommand_preop/ichspi.c	(Arbeitskopie)
@@ -742,22 +742,29 @@
 	return result;
 }
 
-int ich_spi_send_multicommand(struct spi_command *spicommands)
+int ich_spi_send_multicommand(struct spi_command *cmds)
 {
 	int ret = 0;
-	while ((spicommands->writecnt || spicommands->readcnt) && !ret) {
-		ret = ich_spi_send_command(spicommands->writecnt, spicommands->readcnt,
-					   spicommands->writearr, spicommands->readarr);
-		/* This awful hack needs to be smarter.
-		 */
-		if ((ret == SPI_INVALID_OPCODE) &&
-		    ((spicommands->writearr[0] == JEDEC_WREN) ||
-		     (spicommands->writearr[0] == JEDEC_EWSR))) {
-			printf_debug(" due to SPI master limitation, ignoring"
-				     " and hoping it will be run as PREOP\n");
-			ret = 0;
-		}
-		spicommands++;
+	int oppos, preoppos;
+	for (; (cmds->writecnt || cmds->readcnt) && !ret; cmds++) {
+		/* Is the next command valid or a terminator? */
+		if ((cmds + 1)->writecnt || (cmds + 1)->readcnt) {
+			preoppos = find_preop(curopcodes, cmds->writearr[0]);
+			oppos = find_opcode(curopcodes, (cmds + 1)->writearr[0]);
+			/* Is the opcode of the current command listed in the
+			 * ICH struct OPCODES as associated preopcode for the
+			 * opcode of the next command?
+			 */
+			if ((oppos != -1) && (preoppos != -1) &&
+			    (curopcodes->opcode[oppos].atomic - 1 == preoppos)) {
+				printf_debug("opcode 0x%02x will be run as PREOP\n",
+					     cmds->writearr[0]);
+				continue;
+			}
+		}	
+			
+		ret = ich_spi_send_command(cmds->writecnt, cmds->readcnt,
+					   cmds->writearr, cmds->readarr);
 	}
 	return ret;
 }


-- 
http://www.hailfinger.org/




More information about the flashrom mailing list