[flashrom] [PATCH] Compile out wiki output on request
Stefan Reinauer
stepan at coresystems.de
Wed Sep 16 13:48:00 CEST 2009
Carl-Daniel Hailfinger wrote:
> Compile out wiki output on request and move wiki stuff into a separate file.
> This is useful for libflashrom (you don't need wiki output in a coreboot
> payload).
>
> Please note that the patch below was created by using svn cp print.c
> print_wiki.c, then deleting code from each file. As a result, you only
> see the deleted code in the patch instead of the added code in print_wiki.c.
>
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
>
With that option defaulting to "no" (as 99.99% of the flashrom users
have no write access to our wiki) this code is
Acked-by: Stefan Reinauer <stepan at coresystems.de>
> Index: flashrom-wiki_compileout/Makefile
> ===================================================================
> --- flashrom-wiki_compileout/Makefile (Revision 724)
> +++ flashrom-wiki_compileout/Makefile (Arbeitskopie)
> @@ -83,6 +83,9 @@
> # Always enable Dr. Kaiser for now.
> CONFIG_DRKAISER ?= yes
>
> +# Always enable wiki printing for now.
> +CONFIG_PRINT_WIKI ?= yes
> +
> ifeq ($(CONFIG_SERPROG), yes)
> FEATURE_CFLAGS += -D'SERPROG_SUPPORT=1'
> OBJS += serprog.o
> @@ -118,6 +121,11 @@
> OBJS += drkaiser.o
> endif
>
> +ifeq ($(CONFIG_PRINT_WIKI), yes)
> +FEATURE_CFLAGS += -D'PRINT_WIKI_SUPPORT=1'
> +OBJS += print_wiki.o
> +endif
> +
> $(PROGRAM): $(OBJS)
> $(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) $(FEATURE_LIBS)
>
> Index: flashrom-wiki_compileout/flashrom.c
> ===================================================================
> --- flashrom-wiki_compileout/flashrom.c (Revision 724)
> +++ flashrom-wiki_compileout/flashrom.c (Arbeitskopie)
> @@ -581,7 +581,9 @@
> " -l | --layout <file.layout>: read ROM layout from file\n"
> " -i | --image <name>: only flash image name from flash layout\n"
> " -L | --list-supported: print supported devices\n"
> +#if CONFIG_PRINT_WIKI == 1
> " -z | --list-supported-wiki: print supported devices in wiki syntax\n"
> +#endif
> " -p | --programmer <name>: specify the programmer device");
>
> for (p = 0; p < PROGRAMMER_INVALID; p++) {
> @@ -634,10 +636,18 @@
> int option_index = 0;
> int force = 0;
> int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0;
> - int dont_verify_it = 0, list_supported = 0, list_supported_wiki = 0;
> + int dont_verify_it = 0, list_supported = 0;
> +#if CONFIG_PRINT_WIKI == 1
> + int list_supported_wiki = 0;
> +#endif
> int operation_specified = 0;
> int ret = 0, i;
>
> +#if CONFIG_PRINT_WIKI == 1
> + const char *optstring = "rRwvnVEfc:m:l:i:p:Lzh";
> +#else
> + const char *optstring = "rRwvnVEfc:m:l:i:p:Lh";
> +#endif
> static struct option long_options[] = {
> {"read", 0, 0, 'r'},
> {"write", 0, 0, 'w'},
> @@ -651,7 +661,9 @@
> {"layout", 1, 0, 'l'},
> {"image", 1, 0, 'i'},
> {"list-supported", 0, 0, 'L'},
> +#if CONFIG_PRINT_WIKI == 1
> {"list-supported-wiki", 0, 0, 'z'},
> +#endif
> {"programmer", 1, 0, 'p'},
> {"help", 0, 0, 'h'},
> {"version", 0, 0, 'R'},
> @@ -683,7 +695,7 @@
> }
>
> setbuf(stdout, NULL);
> - while ((opt = getopt_long(argc, argv, "rRwvnVEfc:m:l:i:p:Lzh",
> + while ((opt = getopt_long(argc, argv, optstring,
> long_options, &option_index)) != EOF) {
> switch (opt) {
> case 'r':
> @@ -754,9 +766,11 @@
> case 'L':
> list_supported = 1;
> break;
> +#if CONFIG_PRINT_WIKI == 1
> case 'z':
> list_supported_wiki = 1;
> break;
> +#endif
> case 'p':
> for (programmer = 0; programmer < PROGRAMMER_INVALID; programmer++) {
> name = programmer_table[programmer].name;
> @@ -813,10 +827,12 @@
> exit(0);
> }
>
> +#if CONFIG_PRINT_WIKI == 1
> if (list_supported_wiki) {
> print_wiki_tables();
> exit(0);
> }
> +#endif
>
> if (read_it && write_it) {
> printf("Error: -r and -w are mutually exclusive.\n");
> Index: flashrom-wiki_compileout/print_wiki.c
> ===================================================================
> --- flashrom-wiki_compileout/print_wiki.c (Revision 724)
> +++ flashrom-wiki_compileout/print_wiki.c (Arbeitskopie)
> @@ -37,204 +37,6 @@
> const char *note;
> };
>
> -/*
> - * Return a string corresponding to the bustype parameter.
> - * Memory is obtained with malloc() and can be freed with free().
> - */
> -char *flashbuses_to_text(enum chipbustype bustype)
> -{
> - char *ret = calloc(1, 1);
> - if (bustype == CHIP_BUSTYPE_UNKNOWN) {
> - ret = strcat_realloc(ret, "Unknown,");
> - /*
> - * FIXME: Once all chipsets and flash chips have been updated, NONSPI
> - * will cease to exist and should be eliminated here as well.
> - */
> - } else if (bustype == CHIP_BUSTYPE_NONSPI) {
> - ret = strcat_realloc(ret, "Non-SPI,");
> - } else {
> - if (bustype & CHIP_BUSTYPE_PARALLEL)
> - ret = strcat_realloc(ret, "Parallel,");
> - if (bustype & CHIP_BUSTYPE_LPC)
> - ret = strcat_realloc(ret, "LPC,");
> - if (bustype & CHIP_BUSTYPE_FWH)
> - ret = strcat_realloc(ret, "FWH,");
> - if (bustype & CHIP_BUSTYPE_SPI)
> - ret = strcat_realloc(ret, "SPI,");
> - if (bustype == CHIP_BUSTYPE_NONE)
> - ret = strcat_realloc(ret, "None,");
> - }
> - /* Kill last comma. */
> - ret[strlen(ret) - 1] = '\0';
> - ret = realloc(ret, strlen(ret) + 1);
> - return ret;
> -}
> -
> -#define POS_PRINT(x) do { pos += strlen(x); printf(x); } while (0)
> -
> -static int digits(int n)
> -{
> - int i;
> -
> - if (!n)
> - return 1;
> -
> - for (i = 0; n; ++i)
> - n /= 10;
> -
> - return i;
> -}
> -
> -void print_supported_chips(void)
> -{
> - int okcol = 0, pos = 0, i, chipcount = 0;
> - struct flashchip *f;
> -
> - for (f = flashchips; f->name != NULL; f++) {
> - if (GENERIC_DEVICE_ID == f->model_id)
> - continue;
> - okcol = max(okcol, strlen(f->vendor) + 1 + strlen(f->name));
> - }
> - okcol = (okcol + 7) & ~7;
> -
> - for (f = flashchips; f->name != NULL; f++)
> - chipcount++;
> -
> - printf("\nSupported flash chips (total: %d):\n\n", chipcount);
> - POS_PRINT("Vendor: Device:");
> - while (pos < okcol) {
> - printf("\t");
> - pos += 8 - (pos % 8);
> - }
> -
> - printf("Tested OK:\tKnown BAD: Size/KB: Type:\n\n");
> - printf("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");
> -
> - for (f = flashchips; f->name != NULL; f++) {
> - /* Don't print "unknown XXXX SPI chip" entries. */
> - if (!strncmp(f->name, "unknown", 7))
> - continue;
> -
> - printf("%s", f->vendor);
> - for (i = 0; i < 10 - strlen(f->vendor); i++)
> - printf(" ");
> - printf("%s", f->name);
> -
> - pos = 10 + strlen(f->name);
> - while (pos < okcol) {
> - printf("\t");
> - pos += 8 - (pos % 8);
> - }
> - if ((f->tested & TEST_OK_MASK)) {
> - if ((f->tested & TEST_OK_PROBE))
> - POS_PRINT("P ");
> - if ((f->tested & TEST_OK_READ))
> - POS_PRINT("R ");
> - if ((f->tested & TEST_OK_ERASE))
> - POS_PRINT("E ");
> - if ((f->tested & TEST_OK_WRITE))
> - POS_PRINT("W ");
> - }
> - while (pos < okcol + 9) {
> - printf("\t");
> - pos += 8 - (pos % 8);
> - }
> - if ((f->tested & TEST_BAD_MASK)) {
> - if ((f->tested & TEST_BAD_PROBE))
> - printf("P ");
> - if ((f->tested & TEST_BAD_READ))
> - printf("R ");
> - if ((f->tested & TEST_BAD_ERASE))
> - printf("E ");
> - if ((f->tested & TEST_BAD_WRITE))
> - printf("W ");
> - }
> -
> - printf("\t %d", f->total_size);
> - for (i = 0; i < 10 - digits(f->total_size); i++)
> - printf(" ");
> - printf("%s\n", flashbuses_to_text(f->bustype));
> - }
> -}
> -
> -void print_supported_chipsets(void)
> -{
> - int i, j, chipsetcount = 0;
> - const struct penable *c = chipset_enables;
> -
> - for (i = 0; c[i].vendor_name != NULL; i++)
> - chipsetcount++;
> -
> - printf("\nSupported chipsets (total: %d):\n\nVendor: "
> - "Chipset: PCI IDs:\n\n", chipsetcount);
> -
> - for (i = 0; c[i].vendor_name != NULL; i++) {
> - printf("%s", c[i].vendor_name);
> - for (j = 0; j < 25 - strlen(c[i].vendor_name); j++)
> - printf(" ");
> - printf("%s", c[i].device_name);
> - for (j = 0; j < 25 - strlen(c[i].device_name); j++)
> - printf(" ");
> - printf("%04x:%04x%s\n", c[i].vendor_id, c[i].device_id,
> - (c[i].status == OK) ? "" : " (untested)");
> - }
> -}
> -
> -void print_supported_boards_helper(const struct board_info *b, const char *msg)
> -{
> - int i, j, boardcount = 0;
> -
> - for (i = 0; b[i].vendor != NULL; i++)
> - boardcount++;
> -
> - printf("\n%s (total: %d):\n\n", msg, boardcount);
> -
> - for (i = 0; b[i].vendor != NULL; i++) {
> - printf("%s", b[i].vendor);
> - for (j = 0; j < 25 - strlen(b[i].vendor); j++)
> - printf(" ");
> - printf("%s", b[i].name);
> - for (j = 0; j < 23 - strlen(b[i].name); j++)
> - printf(" ");
> - printf("\n");
> - }
> -}
> -
> -void print_supported_boards(void)
> -{
> - int i, j, boardcount = 0;
> - struct board_pciid_enable *b = board_pciid_enables;
> -
> - for (i = 0; b[i].vendor_name != NULL; i++)
> - boardcount++;
> -
> - printf("\nSupported boards which need write-enable code (total: %d):"
> - "\n\nVendor: Board: "
> - "Required option:\n\n", boardcount);
> -
> - for (i = 0; b[i].vendor_name != NULL; i++) {
> - printf("%s", b[i].vendor_name);
> - for (j = 0; j < 25 - strlen(b[i].vendor_name); j++)
> - printf(" ");
> - printf("%s", b[i].board_name);
> - for (j = 0; j < 25 - strlen(b[i].board_name); j++)
> - printf(" ");
> - if (b[i].lb_vendor != NULL)
> - printf("-m %s:%s\n", b[i].lb_vendor, b[i].lb_part);
> - else
> - printf("(none, board is autodetected)\n");
> - }
> -
> - print_supported_boards_helper(boards_ok,
> - "Supported boards which don't need write-enable code");
> - print_supported_boards_helper(boards_bad,
> - "Boards which have been verified to NOT work yet");
> - print_supported_boards_helper(laptops_ok,
> - "Laptops which have been verified to work");
> - print_supported_boards_helper(laptops_bad,
> - "Laptops which have been verified to NOT work yet");
> -}
> -
> const char *wiki_header = "= Supported devices =\n\n\
> <div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
> background-color:#eeeeee; align:right; border:1px solid #aabbcc;\"><small>\n\
> Index: flashrom-wiki_compileout/print.c
> ===================================================================
> --- flashrom-wiki_compileout/print.c (Revision 724)
> +++ flashrom-wiki_compileout/print.c (Arbeitskopie)
> @@ -21,22 +21,9 @@
>
> #include <string.h>
> #include <stdlib.h>
> -#include <time.h>
> #include "flash.h"
> #include "flashchips.h"
>
> -struct board_info_url {
> - const char *vendor;
> - const char *name;
> - const char *url;
> -};
> -
> -struct board_info_notes {
> - const char *vendor;
> - const char *name;
> - const char *note;
> -};
> -
> /*
> * Return a string corresponding to the bustype parameter.
> * Memory is obtained with malloc() and can be freed with free().
> @@ -234,512 +221,3 @@
> print_supported_boards_helper(laptops_bad,
> "Laptops which have been verified to NOT work yet");
> }
> -
> -const char *wiki_header = "= Supported devices =\n\n\
> -<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
> -background-color:#eeeeee; align:right; border:1px solid #aabbcc;\"><small>\n\
> -Please do '''not''' edit these tables in the wiki directly, they are \
> -generated by pasting '''flashrom -z''' output.<br />\
> -'''Last update:''' %s(generated by flashrom %s)\n</small></div>\n";
> -
> -const char *chipset_th = "{| border=\"0\" style=\"font-size: smaller\"\n\
> -|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
> -! align=\"left\" | Southbridge\n! align=\"left\" | PCI IDs\n\
> -! align=\"left\" | Status\n\n";
> -
> -const char *board_th = "{| border=\"0\" style=\"font-size: smaller\" \
> -valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
> -! align=\"left\" | Mainboard\n! align=\"left\" | Status\n\n";
> -
> -const char *board_th2 = "{| border=\"0\" style=\"font-size: smaller\" \
> -valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
> -! align=\"left\" | Mainboard\n! align=\"left\" | Required option\n\
> -! align=\"left\" | Status\n\n";
> -
> -const char *board_intro = "\
> -\n== Supported mainboards ==\n\n\
> -In general, it is very likely that flashrom works out of the box even if your \
> -mainboard is not listed below.\n\nThis is a list of mainboards where we have \
> -verified that they either do or do not need any special initialization to \
> -make flashrom work (given flashrom supports the respective chipset and flash \
> -chip), or that they do not yet work at all. If they do not work, support may \
> -or may not be added later.\n\n\
> -Mainboards which don't appear in the list may or may not work (we don't \
> -know, someone has to give it a try). Please report any further verified \
> -mainboards on the [[Mailinglist|mailing list]].\n";
> -
> -const char *chip_th = "{| border=\"0\" style=\"font-size: smaller\" \
> -valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
> -! align=\"left\" | Device\n! align=\"left\" | Size / KB\n\
> -! align=\"left\" | Type\n! align=\"left\" colspan=\"4\" | Status\n\n\
> -|- bgcolor=\"#6699ff\"\n| colspan=\"4\" | \n\
> -| Probe\n| Read\n| Write\n| Erase\n\n";
> -
> -const char *programmer_section = "\
> -\n== Supported programmers ==\n\nThis is a list \
> -of supported PCI devices flashrom can use as programmer:\n\n{| border=\"0\" \
> -valign=\"top\"\n| valign=\"top\"|\n\n{| border=\"0\" style=\"font-size: \
> -smaller\" valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
> -! align=\"left\" | Device\n! align=\"left\" | PCI IDs\n\
> -! align=\"left\" | Status\n\n";
> -
> -const char *laptop_intro = "\n== Supported laptops/notebooks ==\n\n\
> -In general, flashing laptops is more difficult because laptops\n\n\
> -* often use the flash chip for stuff besides the BIOS,\n\
> -* often have special protection stuff which has to be handled by flashrom,\n\
> -* often use flash translation circuits which need drivers in flashrom.\n\n\
> -<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
> -background-color:#ff6666; align:right; border:1px solid #000000;\">\n\
> -'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \
> -untested laptops unless you have a means to recover from a flashing that goes \
> -wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
> -
> -/* Please keep these lists alphabetically ordered by vendor/board. */
> -const struct board_info_url boards_url[] = {
> - /* Verified working boards that don't need write-enables. */
> - { "Abit", "AX8", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=Y&fMTYPE=Socket%20939&pMODEL_NAME=AX8" },
> - { "Abit", "Fatal1ty F-I90HD", "http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?pMODEL_NAME=Fatal1ty+F-I90HD&fMTYPE=LGA775" },
> - { "Advantech", "PCM-5820", "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm" },
> - { "ASI", "MB-5BLMP", "http://www.hojerteknik.com/winnet.htm" },
> - { "ASRock", "A770CrossFire", "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2\%2b" },
> - { "ASUS", "A7N8X Deluxe", "http://www.asus.com/Product.aspx?P_ID=wAsRYm41KTp78MFC" },
> - { "ASUS", "A7N8X-E Deluxe", "http://www.asus.com/products.aspx?l1=3&l2=13&l3=56&l4=0&model=217&modelmenu=1" },
> - { "ASUS", "A7V400-MX", "http://www.asus.com.tw/products.aspx?l1=3&l2=13&l3=63&l4=0&model=228&modelmenu=1" },
> - { "ASUS", "A7V8X-MX", "http://www.asus.com.tw/products.aspx?l1=3&l2=13&l3=64&l4=0&model=229&modelmenu=1" },
> - { "ASUS", "A8N-E", "http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=171&l4=0&model=455&modelmenu=2" },
> - { "ASUS", "A8NE-FM/S", "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE-FM" },
> - { "ASUS", "A8N-SLI", "http://asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK" },
> - { "ASUS", "A8N-SLI Premium", "http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=148&l4=0&model=539&modelmenu=1" },
> - { "ASUS", "A8V Deluxe", "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU" },
> - { "ASUS", "A8V-E Deluxe", "http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=143&l4=0&model=376&modelmenu=1" },
> - { "ASUS", "A8V-E SE", "http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=143&l4=0&model=576&modelmenu=1" },
> - { "ASUS", "M2A-MX", "http://www.asus.com/products.aspx?l1=3&l2=101&l3=583&l4=0&model=1909&modelmenu=1" },
> - { "ASUS", "M2A-VM", "http://www.asus.com.tw/products.aspx?l1=3&l2=101&l3=496&l4=0&model=1568&modelmenu=1" },
> - { "ASUS", "M2N-E", "http://www.asus.com/products.aspx?l1=3&l2=101&l3=308&l4=0&model=1181&modelmenu=1" },
> - { "ASUS", "M2V", "http://asus.com/Product.aspx?P_ID=OqYlEDFfF6ZqZGvp" },
> - { "ASUS", "P2B", "http://www.motherboard.cz/mb/asus/P2B.htm" },
> - { "ASUS", "P2B-D", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/" },
> - { "ASUS", "P2B-DS", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/" },
> - { "ASUS", "P2B-F", "http://www.motherboard.cz/mb/asus/P2B-F.htm" },
> - { "ASUS", "P2L97-S", "http://www.motherboard.cz/mb/asus/P2L97-S.htm" },
> - { "ASUS", "P5B-Deluxe", "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-Deluxe/" },
> - { "ASUS", "P5KC", "http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj" },
> - { "ASUS", "P5L-MX", "http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH" },
> - { "ASUS", "P6T Deluxe V2", "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx" },
> - { "A-Trend", "ATC-6220", "http://www.motherboard.cz/mb/atrend/atc6220.htm" },
> - { "BCOM", "WinNET100", "http://www.coreboot.org/BCOM_WINNET100" },
> - { "GIGABYTE", "GA-6BXC", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=1445&ProductName=GA-6BXC" },
> - { "GIGABYTE", "GA-6BXDU", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=1429" },
> - { "GIGABYTE", "GA-6ZMA", "http://www.gigabyte.de/Support/Motherboard/BIOS_Model.aspx?ProductID=3289" },
> - { "GIGABYTE", "GA-EX58-UD4P", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2986" },
> - { "GIGABYTE", "GA-EP35-DS3L", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2778" },
> - { "GIGABYTE", "GA-MA790GP-DS4H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2887" },
> - { "GIGABYTE", "GA-MA78GPM-DS2H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2859" },
> - { "Intel", "EP80759", NULL },
> - { "Jetway", "J7F4K1G5D-PB", "http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J7F4K1G5D-P" },
> - { "MSI", "MS-6570 (K7N2)", "http://www.msi-computer.de/index.php?func=proddesc&prod_no=519&maincat_no=1" },
> - { "MSI", "MS-7065", "http://browse.geekbench.ca/geekbench2/view/53114" },
> - { "MSI", "MS-7168 (Orion)", "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform_honeymoon_istart" },
> - { "MSI", "MS-7236 (945PL Neo3)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1173" },
> - { "MSI", "MS-7255 (P4M890M)", "http://www.tcsbahamas.com/P4M89.htm" },
> - { "MSI", "MS-7345 (P35 Neo2-FIR)","http://www.msi.com/index.php?func=prodcpusupport&maincat_no=1&cat2_no=170&cat3_no=&prod_no=1261" },
> - { "NEC", "PowerMate 2000", "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/" },
> - { "PC Engines", "Alix.1c", "http://pcengines.ch/alix1c.htm" },
> - { "PC Engines", "Alix.2c2", "http://pcengines.ch/alix2c2.htm" },
> - { "PC Engines", "Alix.2c3", "http://pcengines.ch/alix2c3.htm" },
> - { "PC Engines", "Alix.3c3", "http://pcengines.ch/alix3c3.htm" },
> - { "PC Engines", "Alix.3d3", "http://pcengines.ch/alix3d3.htm" },
> - { "RCA", "RM4100", "http://www.settoplinux.org/index.php?title=RCA_RM4100" },
> - { "Sun", "Blade x6250", "http://www.sun.com/servers/blades/x6250/" },
> - { "Supermicro", "H8QC8", "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm" },
> - { "Thomson", "IP1000", "http://www.settoplinux.org/index.php?title=Thomson_IP1000" },
> - { "TriGem", "Lomita", "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml" },
> - { "T-Online", "S-100", "http://wiki.freifunk-hannover.de/T-Online_S_100" },
> - { "Tyan", "iS5375-1U", "http://www.tyan.com/product_board_detail.aspx?pid=610" },
> - { "Tyan", "S1846", "http://www.tyan.com/archive/products/html/tsunamiatx.html" },
> - { "Tyan", "S2466", "http://www.tyan.com/product_board_detail.aspx?pid=461" },
> - { "Tyan", "S2881", "http://www.tyan.com/product_board_detail.aspx?pid=115" },
> - { "Tyan", "S2882", "http://www.tyan.com/product_board_detail.aspx?pid=121" },
> - { "Tyan", "S2882-D", "http://www.tyan.com/product_board_detail.aspx?pid=127" },
> - { "Tyan", "S2891", "http://www.tyan.com/product_board_detail.aspx?pid=144" },
> - { "Tyan", "S2892", "http://www.tyan.com/product_board_detail.aspx?pid=145" },
> - { "Tyan", "S2895", "http://www.tyan.com/archive/products/html/thunderk8we.html" },
> - { "Tyan", "S3095", "http://www.tyan.com/product_board_detail.aspx?pid=181" },
> - { "Tyan", "S5180", "http://www.tyan.com/product_board_detail.aspx?pid=456" },
> - { "Tyan", "S5191", "http://www.tyan.com/product_board_detail.aspx?pid=343" },
> - { "Tyan", "S5197", "http://www.tyan.com/product_board_detail.aspx?pid=349" },
> - { "Tyan", "S5211", "http://www.tyan.com/product_board_detail.aspx?pid=591" },
> - { "Tyan", "S5211-1U", "http://www.tyan.com/product_board_detail.aspx?pid=593" },
> - { "Tyan", "S5220", "http://www.tyan.com/product_board_detail.aspx?pid=597" },
> - { "Tyan", "S5375", "http://www.tyan.com/product_board_detail.aspx?pid=566" },
> - { "Tyan", "S5376G2NR/S5376WAG2NR","http://www.tyan.com/product_board_detail.aspx?pid=605" },
> - { "Tyan", "S5377", "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000017" },
> - { "Tyan", "S5397", "http://www.tyan.com/product_board_detail.aspx?pid=560" },
> - { "VIA", "EPIA-EX15000G", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=450" },
> - { "VIA", "EPIA-LN", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=473" },
> - { "VIA", "EPIA-M700", "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3700" },
> - { "VIA", "EPIA-NX15000G", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=470" },
> - { "VIA", "NAB74X0", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=590" },
> - { "VIA", "pc2500e", "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp" },
> - { "VIA", "VB700X", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=490" },
> -
> - /* Verified working boards that DO need write-enables. */
> - { "Acorp", "6A815EPD", "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.asp" },
> - { "agami", "Aruma", "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-6000-series" },
> - { "Albatron", "PM266A Pro", "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview&no=56" }, /* FIXME */
> - { "AOpen", "vKM400Am-S", "http://usa.aopen.com/products_detail.aspx?Auno=824" },
> - { "Artec Group", "DBE61", "http://wiki.thincan.org/DBE61" },
> - { "Artec Group", "DBE62", "http://wiki.thincan.org/DBE62" },
> - { "ASUS", "A7V600-X", "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k" },
> - { "ASUS", "A7V8X-MX SE", "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ" },
> - { "ASUS", "P4B266", "http://www.ciao.co.uk/ASUS_Intel_845D_Chipset_P4B266__5409807#productdetail" },
> - { "ASUS", "P4P800-E Deluxe", "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g" },
> - { "ASUS", "P5A", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/" },
> - { "Biostar", "P4M80-M4", "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4" },
> - { "Elitegroup", "K7VTA3", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&CategoryID=1&DetailName=Specification&MenuID=52&LanID=0" },
> - { "EPoX", "EP-8K5A2", "http://www.epox.com/product.asp?ID=EP-8K5A2" },
> - { "EPoX", "EP-BX3", "http://www.epox.com/product.asp?ID=EP-BX3" },
> - { "GIGABYTE", "GA-2761GXDK", "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gigabyte_dtx-mainboard/" },
> - { "GIGABYTE", "GA-7VT600", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=1666" },
> - { "GIGABYTE", "GA-7ZM", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=1366" },
> - { "GIGABYTE", "GA-K8N-SLI", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=1928" },
> - { "GIGABYTE", "GA-M57SLI-S4", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2287&ModelName=GA-M57SLI-S4" },
> - { "GIGABYTE", "GA-M61P-S3", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2434" },
> - { "GIGABYTE", "GA-MA78G-DS3H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2800" }, /* TODO: Rev 1.x or 2.x? */
> - { "GIGABYTE", "GA-MA78GM-S2H", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2758" }, /* TODO: Rev. 1.0, 1.1, or 2.x? */
> - { "GIGABYTE", "GA-MA790FX-DQ6", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2690" },
> - { "HP", "DL145 G3", "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00816835&lang=en&cc=us&taskId=101&prodSeriesId=3219755&prodTypeId=15351" },
> - { "IBM", "x3455", "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html" },
> - { "Intel", "D201GLY", "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm" },
> - { "IWILL", "DK8-HTX", "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.asp?p_id=98" },
> - { "Kontron", "986LCD-M", "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/miniitx+motherboards/986lcdmmitx.html" },
> - { "Mitac", "6513WU", "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm" },
> - { "MSI", "MS-6590 (KT4 Ultra)", "http://www.msicomputer.com/product/p_spec.asp?model=KT4_Ultra&class=mb" },
> - { "MSI", "MS-6702E (K8T Neo2-F)","http://www.msicomputer.com/product/p_spec.asp?model=K8T_Neo2-F&class=mb" },
> - { "MSI", "MS-6712 (KT4V)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=505" },
> - { "MSI", "MS-7046", "http://www.heimir.de/ms7046/" },
> - { "MSI", "MS-7135 (K8N Neo3)", "http://www.msi-computer.de/index.php?func=proddesc&prod_no=170&maincat_no=1" },
> - { "Shuttle", "AK38N", "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/" },
> - { "Soyo", "SY-7VCA", "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html" },
> - { "Tyan", "S2498 (Tomcat K7M)", "http://www.tyan.com/archive/products/html/tomcatk7m.html" },
> - { "VIA", "EPIA-CN", "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=400" },
> - { "VIA", "EPIA M/MII/...", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=202" }, /* EPIA-MII link for now */
> - { "VIA", "EPIA-N/NL", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=221" }, /* EPIA-N link for now */
> - { "VIA", "EPIA SP", "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=261" },
> - { "VIA", "PC3500G", "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp" },
> -
> - /* Verified non-working boards (for now). */
> - { "Abit", "IS-10", "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=IS-10&fMTYPE=Socket+478" },
> - { "ASRock", "K7VT4A+", "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=" },
> - { "ASUS", "MEW-AM", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/" },
> - { "ASUS", "MEW-VM", "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm" },
> - { "ASUS", "P3B-F", "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/" },
> - { "ASUS", "P5B", "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/" },
> - { "ASUS", "P5BV-M", "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/" },
> - { "Biostar", "M6TBA", "ftp://ftp.biostar-usa.com/manuals/M6TBA/" },
> - { "Boser", "HS-6637", "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf" },
> - { "DFI", "855GME-MGF", "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?action=e&downloadType=&windowstate=normal&mode=view&downloadFlag=false&itemId=433" },
> - { "FIC", "VA-502", "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/" },
> - { "MSI", "MS-6178", "http://www.msi-technology.de/index.php?func=proddesc&prod_no=343&maincat_no=1" },
> - { "MSI", "MS-7260 (K9N Neo)", "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=255" },
> - { "Soyo", "SY-5VD", "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English" },
> - { "Sun", "Fire x4540", "http://www.sun.com/servers/x64/x4540/" },
> - { "Sun", "Fire x4150", "http://www.sun.com/servers/x64/x4150/" },
> - { "Sun", "Fire x4200", "http://www.sun.com/servers/entry/x4200/" },
> - { "Sun", "Fire x4600", "http://www.sun.com/servers/x64/x4600/" },
> -
> - /* Verified working laptops. */
> - { "Lenovo", "3000 V100 TF05Cxx", "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3000Notebook&series=Lenovo+3000+V+Series#viewallmodelstop" },
> -
> - /* Verified non-working laptops (for now). */
> - { "Acer", "Aspire One", NULL },
> - { "ASUS", "Eee PC 701 4G", "http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS" },
> - { "Dell", "Latitude CPi A366XT", "http://www.coreboot.org/Dell_Latitude_CPi_A366XT" },
> - { "HP/Compaq", "nx9010", "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00348514" },
> - { "IBM/Lenovo", "Thinkpad T40p", "http://www.thinkwiki.org/wiki/Category:T40p" },
> - { "IBM/Lenovo", "240", "http://www.stanford.edu/~bresnan//tp240.html" },
> -
> - { NULL, NULL, 0 },
> -};
> -
> -/* Please keep these lists alphabetically ordered by vendor/board. */
> -const struct board_info_notes boards_notes[] = {
> - /* Verified working boards that don't need write-enables. */
> - { "ASI", "MB-5BLMP", "Used in the IGEL WinNET III thin client." },
> - { "ASUS", "A8V-E SE", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html." },
> - { "ASUS", "M2A-VM", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html." },
> - { "BCOM", "WinNET100", "Used in the IGEL-316 thin client." },
> - { "GIGABYTE", "GA-7ZM", "Works fine iff you remove jumper JP9 on the board and disable the flash protection BIOS option." },
> -
> - /* Verified working boards that DO need write-enables. */
> - { "Acer", "Aspire One", "See http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html." },
> -
> - /* Verified non-working boards (for now). */
> - { "MSI", "MS-6178", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot." },
> - { "MSI", "MS-7260 (K9N Neo)", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot." },
> -
> - /* Verified working laptops. */
> - /* None which need comments, yet... */
> -
> - /* Verified non-working laptops (for now). */
> - { "Acer", "Aspire One", "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html" },
> - { "ASUS", "Eee PC 701 4G", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)." },
> - { "Dell", "Latitude CPi A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop." },
> - { "HP/Compaq", "nx9010", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)." },
> - { "IBM/Lenovo", "Thinkpad T40p", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later." },
> -
> - { NULL, NULL, 0 },
> -};
> -
> -static int url(const char *vendor, const char *board)
> -{
> - int i;
> - const struct board_info_url *b = boards_url;
> -
> - for (i = 0; b[i].vendor != NULL; i++) {
> - if (!strcmp(vendor, b[i].vendor) && !strcmp(board, b[i].name))
> - return i;
> - }
> -
> - return -1;
> -}
> -
> -static int note(const char *vendor, const char *board)
> -{
> - int i;
> - const struct board_info_notes *n = boards_notes;
> -
> - for (i = 0; n[i].vendor != NULL; i++) {
> - if (!strcmp(vendor, n[i].vendor) && !strcmp(board, n[i].name))
> - return i;
> - }
> -
> - return -1;
> -}
> -
> -void print_supported_chipsets_wiki(void)
> -{
> - int i, j, enablescount = 0, color = 1;
> - const struct penable *e;
> -
> - for (e = chipset_enables; e->vendor_name != NULL; e++)
> - enablescount++;
> -
> - printf("\n== Supported chipsets ==\n\nTotal amount of supported "
> - "chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n| "
> - "valign=\"top\"|\n\n%s", enablescount, chipset_th);
> -
> - e = chipset_enables;
> - for (i = 0, j = 0; e[i].vendor_name != NULL; i++, j++) {
> - /* Alternate colors if the vendor changes. */
> - if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name))
> - color = !color;
> -
> - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s "
> - "|| %04x:%04x || %s\n", (color) ? "eeeeee" : "dddddd",
> - e[i].vendor_name, e[i].device_name,
> - e[i].vendor_id, e[i].device_id,
> - (e[i].status == OK) ? "{{OK}}" : "?");
> -
> - /* Split table in three columns. */
> - if (j >= (enablescount / 3 + 1)) {
> - printf("\n|}\n\n| valign=\"top\"|\n\n%s", chipset_th);
> - j = 0;
> - }
> - }
> -
> - printf("\n|}\n\n|}\n");
> -}
> -
> -static void wiki_helper(const char *heading, const char *status,
> - int cols, const struct board_info boards[])
> -{
> - int i, j, k, c, boardcount = 0, color = 1, num_notes = 0;
> - const struct board_info *b;
> - const struct board_info_url *u = boards_url;
> - char *notes = calloc(1, 1);
> - char tmp[900 + 1];
> -
> - for (b = boards; b->vendor != NULL; b++)
> - boardcount++;
> -
> - printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n"
> - "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s",
> - heading, boardcount, board_th);
> -
> - for (i = 0, j = 0, b = boards; b[i].vendor != NULL; i++, j++) {
> - /* Alternate colors if the vendor changes. */
> - if (i > 0 && strcmp(b[i].vendor, b[i - 1].vendor))
> - color = !color;
> -
> - k = url(b[i].vendor, b[i].name);
> - c = note(b[i].vendor, b[i].name);
> -
> - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s%s %s%s ||"
> - " {{%s}}", (color) ? "eeeeee" : "dddddd", b[i].vendor,
> - (k != -1 && u[k].url) ? "[" : "",
> - (k != -1 && u[k].url) ? u[k].url : "",
> - b[i].name, (k != -1 && u[k].url) ? "]" : "", status);
> -
> - if (c != -1) {
> - printf("<sup>%d</sup>\n", num_notes + 1);
> - snprintf((char *)&tmp, 900, "<sup>%d</sup> %s<br />\n",
> - 1 + num_notes++, boards_notes[c].note);
> - notes = strcat_realloc(notes, (char *)&tmp);
> - } else {
> - printf("\n");
> - }
> -
> - /* Split table in 'cols' columns. */
> - if (j >= (boardcount / cols + 1)) {
> - printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th);
> - j = 0;
> - }
> - }
> -
> - printf("\n|}\n\n|}\n");
> -
> - if (num_notes > 0)
> - printf("\n<small>\n%s</small>\n", notes);
> - free(notes);
> -}
> -
> -static void wiki_helper2(const char *heading, int cols)
> -{
> - int i, j, k, boardcount = 0, color = 1;
> - struct board_pciid_enable *b;
> - const struct board_info_url *u = boards_url;
> -
> - for (b = board_pciid_enables; b->vendor_name != NULL; b++)
> - boardcount++;
> -
> - printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n"
> - "{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s",
> - heading, boardcount, board_th2);
> -
> - b = board_pciid_enables;
> - for (i = 0, j = 0; b[i].vendor_name != NULL; i++, j++) {
> - /* Alternate colors if the vendor changes. */
> - if (i > 0 && strcmp(b[i].vendor_name, b[i - 1].vendor_name))
> - color = !color;
> -
> - k = url(b[i].vendor_name, b[i].board_name);
> -
> - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s%s %s%s "
> - "|| %s%s%s%s || {{OK}}\n", (color) ? "eeeeee" : "dddddd",
> - b[i].vendor_name, (k != -1 && u[k].url) ? "[" : "",
> - (k != -1 && u[k].url) ? u[k].url : "", b[i].board_name,
> - (k != -1 && u[k].url) ? "]" : "",
> - (b[i].lb_vendor) ? "-m " : "—",
> - (b[i].lb_vendor) ? b[i].lb_vendor : "",
> - (b[i].lb_vendor) ? ":" : "",
> - (b[i].lb_vendor) ? b[i].lb_part : "");
> -
> - /* Split table in three columns. */
> - if (j >= (boardcount / cols + 1)) {
> - printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th2);
> - j = 0;
> - }
> - }
> -
> - printf("\n|}\n\n|}\n");
> -}
> -
> -void print_supported_boards_wiki(void)
> -{
> - printf("%s", board_intro);
> - wiki_helper("Known good (worked out of the box)", "OK", 3, boards_ok);
> - wiki_helper2("Known good (with write-enable code in flashrom)", 3);
> - wiki_helper("Not supported (yet)", "No", 3, boards_bad);
> -
> - printf("%s", laptop_intro);
> - wiki_helper("Known good (worked out of the box)", "OK", 1, laptops_ok);
> - wiki_helper("Not supported (yet)", "No", 1, laptops_bad);
> -}
> -
> -void print_supported_chips_wiki(void)
> -{
> - int i = 0, c = 1, chipcount = 0;
> - struct flashchip *f, *old = NULL;
> - uint32_t t;
> -
> - for (f = flashchips; f->name != NULL; f++)
> - chipcount++;
> -
> - printf("\n== Supported chips ==\n\nTotal amount of supported "
> - "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n"
> - "| valign=\"top\"|\n\n%s", chipcount, chip_th);
> -
> - for (f = flashchips; f->name != NULL; f++, i++) {
> - /* Don't print "unknown XXXX SPI chip" entries. */
> - if (!strncmp(f->name, "unknown", 7))
> - continue;
> -
> - /* Alternate colors if the vendor changes. */
> - if (old != NULL && strcmp(old->vendor, f->vendor))
> - c = !c;
> -
> - t = f->tested;
> - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s || %d "
> - "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}\n",
> - (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
> - f->total_size, flashbuses_to_text(f->bustype),
> - (t & TEST_OK_PROBE) ? "OK" :
> - (t & TEST_BAD_PROBE) ? "No" : ((c) ? "?2" : "?"),
> - (t & TEST_OK_READ) ? "OK" :
> - (t & TEST_BAD_READ) ? "No" : ((c) ? "?2" : "?"),
> - (t & TEST_OK_ERASE) ? "OK" :
> - (t & TEST_BAD_ERASE) ? "No" : ((c) ? "?2" : "?"),
> - (t & TEST_OK_WRITE) ? "OK" :
> - (t & TEST_BAD_WRITE) ? "No" : ((c) ? "?2" : "?"));
> -
> - /* Split table into three columns. */
> - if (i >= (chipcount / 3 + 1)) {
> - printf("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th);
> - i = 0;
> - }
> -
> - old = f;
> - }
> -
> - printf("\n|}\n\n|}\n");
> -}
> -
> -void print_supported_pcidevs_wiki(struct pcidev_status *devs)
> -{
> - int i = 0;
> - static int c = 0;
> -
> - /* Alternate colors if the vendor changes. */
> - c = !c;
> -
> - for (i = 0; devs[i].vendor_name != NULL; i++) {
> - printf("|- bgcolor=\"#%s\" valign=\"top\"\n| %s || %s || "
> - "%04x:%04x || {{%s}}\n", (c) ? "eeeeee" : "dddddd",
> - devs[i].vendor_name, devs[i].device_name,
> - devs[i].vendor_id, devs[i].device_id,
> - (devs[i].status == PCI_NT) ? (c) ? "?2" : "?" : "OK");
> - }
> -}
> -
> -void print_wiki_tables(void)
> -{
> - time_t t = time(NULL);
> -
> - printf(wiki_header, ctime(&t), flashrom_version);
> - print_supported_chips_wiki();
> - print_supported_chipsets_wiki();
> - print_supported_boards_wiki();
> - printf("%s", programmer_section);
> -#if NIC3COM_SUPPORT == 1
> - print_supported_pcidevs_wiki(nics_3com);
> -#endif
> -#if DRKAISER_SUPPORT == 1
> - /* FIXME: drkaiser_pcidev is missing here. */
> -#endif
> -#if SATASII_SUPPORT == 1
> - print_supported_pcidevs_wiki(satas_sii);
> -#endif
> - printf("\n|}\n");
> -}
> -
>
>
>
More information about the flashrom
mailing list