[flashrom] Flashrom write on a Gigabyte GA-MA770-UD3 motherboard
Davíð Þór Þórarinsson
david.thor at gmail.com
Wed Sep 2 22:20:09 CEST 2009
On Wed, Sep 2, 2009 at 10:08 PM, Stefan Reinauer<stepan at coresystems.de> wrote:
>
> On 02.09.2009, at 21:05, Davíð Þór Þórarinsson <david.thor at gmail.com> wrote:
>
>> Hello Carl-Daniel!
>>
>> Sorry for not getting to this sooner. I never got your e-mail
>> yesterday because of the Gmail crash and I just got back home from
>> work. See my answers below.
>>
>> On Tue, Sep 1, 2009 at 9:43 PM, Carl-Daniel
>> Hailfinger<c-d.hailfinger.devel.2006 at gmx.net> wrote:
>>>
>>> Hi Davíð,
>>>
>>> On 01.09.2009 20:39, Davíð Þór Þórarinsson wrote:
>>>>
>>>> Some interesting facts: The chipset in this product is not on your
>>>> list of supported chipsets, nor is the motherboard found on your list
>>>> of supported motherboards. the chipset according to the manual is
>>>> North Bridge: AMD770, South Bridge: AMD SB710.
>>>
>>> We list everything in the SB700 family (SB700/SB710/SB750) as SB700. I
>>> have sent a patch to fix this and we'll commit it soon.
>>>
>>>
>>>> And it worked like a charm!
>>>>
>>>
>>> Glad to hear. We'll add your board to the list of working boards. It
>>> would be nice if you could reply-all to this mail with the output from
>>> lspci -nnvvvxxx
>>
>> The lspci output is found at the end of the mail (below)
>>
>>>
>>>
>>>> During the flash update, both the motherboard and chipset were wrongly
>>>> identified. Here is the output from the operation:
>>>>
>>>> flashrom v0.9.0-r631
>>>> No coreboot table found
>>>> Found Chipset "AMD SB700", enabling flash write... OK
>>>> Found board "GIGABYTE GA-MA78GM-S2H", enabling flash write... FAILED!
>>>>
>>>
>>> Hmmm. The Gigabyte board mismatch problem... we can't fix the problem
>>> due to nonstandard PCI settings on these boards, but we can hide it.
>>>
>>> Would you mind downloading and compiling the latest flashrom version?
>>> You can get it either from our subversion repository at
>>> svn://coreboot.org/flashrom/trunk or a current snapshot from
>>> http://qa.coreboot.org/snapshots/
>>> The output of latest
>>> flashrom -V
>>> would be appreciated as well so I can check the effect of some recent
>>> changes on your board.
>>
>> Sure thing. I downloaded the 0.9.1-r709 version from the snapshots but
>> I am unable to get it to compile properly. Any idea what it could be?
>> Here is the output:
>>
>> davidt at newthor:/tmp/flashrom-0.9.1-r709$ make
>> Checking for a C compiler... found.
>> Checking for pciutils and zlib... found.
>> Checking for FTDI support... not found.
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o chipset_enable.o -c
>> chipset_enable.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o board_enable.o -c board_enable.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o udelay.o -c udelay.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o jedec.o -c jedec.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o stm50flw0x0x.o -c stm50flw0x0x.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst28sf040.o -c sst28sf040.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o am29f040b.o -c am29f040b.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o mx29f002.o -c mx29f002.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o m29f400bt.o -c m29f400bt.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o pm29f002.o -c pm29f002.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o w49f002u.o -c w49f002u.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o 82802ab.o -c 82802ab.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o pm49fl00x.o -c pm49fl00x.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lf040.o -c sst49lf040.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o en29f002a.o -c en29f002a.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lfxxxc.o -c sst49lfxxxc.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst_fwhub.o -c sst_fwhub.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o layout.o -c layout.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o cbtable.o -c cbtable.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o flashchips.o -c flashchips.c
>> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
>> -D'FLASHROM_VERSION="0.9.1-r709"' -o physmap.o -c physmap.c
>> cc1: warnings being treated as errors
>> physmap.c: In function ‘rdmsr’:
>> physmap.c:146: error: dereferencing type-punned pointer will break
>> strict-aliasing rules
>> make: *** [physmap.o] Error 1
>>
>
> What's your compiler version? Adding -fno-strict-aliasing to your CFLAGS
> should temporarily fix the issue.
>
> Stefan
It sure did.
# gcc -v
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
4.4.1-3ubuntu3'
--with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs
--enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr
--enable-shared --enable-multiarch --enable-linker-build-id
--with-system-zlib --libexecdir=/usr/lib --without-included-gettext
--enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4
--program-suffix=-4.4 --enable-nls --enable-clocale=gnu
--enable-libstdcxx-debug --enable-mpfr --enable-objc-gc
--disable-werror --with-arch-32=i486 --with-tune=generic
--enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.4.1 (Ubuntu 4.4.1-3ubuntu3)
The flashrom -V output is below. Let me know once again if there is
anything more that I can do to help. And thanks yet again for this
great utility!
/David
root at newthor:/usr/local/sbin# ./flashrom -V
flashrom v0.9.1-r709
No coreboot table found.
Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI
base address is at 0xfec10000
AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0
PrefetchEnSPIFromIMC=1, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1
SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1,
ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0
GPIO11 used for SPI_DO
GPIO12 used for SPI_DI
GPIO31 used for SPI_HOLD
GPIO32 used for SPI_CS
GPIO47 used for SPI_CLK
ROM strap override is not active
OK.
This chipset supports the following protocols: LPC,FWH,SPI.
Disabling flash write protection for board "GIGABYTE GA-MA78GM-S2H"...
FAILED!
Calibrating delay loop... 894M loops per second, 100 myus = 175 us.
OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF041A, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF081, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF161, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF321, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF321A, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF641, 8192 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25F512B, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25FS010, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25FS040, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF041, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF081A, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF161, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF161A, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26F004, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB011D, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB021D, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB041D, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB081D, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB161D, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB321C, 4224 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB321D, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB642D, 8192 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A25L40P, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=4
The FIFO pointer after skipping is 0.
[c2][20][14][c2]
RDID returned 0xc2 0x20 0x14 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B10, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B20, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B40, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B80, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B16, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B32, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B64, 8192 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25D16, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F05, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F10, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F20, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F40, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F80, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F16, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F32, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x00, id2 0xe0
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
Probing for Macronix MX25L512, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L1005, 128 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L2005, 256 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L4005, 512 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L8005, 1024 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
sb600_spi_send_command, cmd=5, writecnt=0, readcnt=2
The FIFO pointer after skipping is 0.
[00][00]
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Macronix MX25L1605, 2048 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L1635D, 2048 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L3205, 4096 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L3235D, 4096 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L6405, 8192 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L12805, 16384 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE20, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE40, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE80, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE16, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV010, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV016B, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV020, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV040, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV080B, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV512, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x24, id2
0x41
Probing for Spansion S25FL016A, 2048 KB: sb600_spi_send_command,
cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF016B, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF032B, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF040B, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF040.REMS, 512 KB: sb600_spi_send_command,
cmd=90, writecnt=3, readcnt=2
[0] [0] [0]
[ 0][ 0][ 0]The FIFO pointer after skipping is 3.
[c2][13]
REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF040B.REMS, 512 KB: sb600_spi_send_command,
cmd=90, writecnt=3, readcnt=2
[0] [0] [0]
[ 0][ 0][ 0]The FIFO pointer after skipping is 3.
[c2][13]
REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF080B, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x75, id2 0x10,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x00, id2
0xe0
Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x24, id2 0x41,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x24, id2
0x41
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0x24, id2
0x41
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x24, id2 0x41,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0x24, id2
0x41
Probing for ST M25P05-A, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P05.RES, 64 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. Probing for ST M25P10-A, 128 KB:
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P10.RES, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. Probing for ST M25P20, 256 KB:
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40-old, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. Probing for ST M25P80, 1024 KB:
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P16, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P32, 4096 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P64, 8192 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P128, 16384 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x00, id2
0xe0
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x00, id2
0xe0
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x24, id2
0x41
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x24, id2
0x41
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0x24, id2 0x41
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x00, id2 0xe0
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x24, id2 0x41
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0x24, id2 0x41,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Winbond W25x10, 128 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x20, 256 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x40, 512 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x80, 1024 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x16, 2048 KB: sb600_spi_send_command, cmd=9f,
writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W29C011, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x00, id2 0xe0,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x00, id2
0xe0, id1 parity violation
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x00, id2
0xe0, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x24, id2
0x41, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type
LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0x24, id2 0x41
Probing for Winbond W39V080FA (dual mode), 512 KB:
probe_winbond_fwhub: id1 0x0, id2 0xe0
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash
chip, zero size at 0x100000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip,
zero size at 0x100000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping
flash chip, zero size at 0x100000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip,
zero size at 0x100000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip,
zero size at 0x100000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero
size at 0x100000000.
sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0.
[c2][20][14]
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
No operations were specified.
>
>
>
>
>> Best regards,
>>
>> /David
>>
>>
>>
>>
>> lspci output:
>>
>>
>> 00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset
>> Host Bridge [1002:5957]
>> Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host
>> Bridge [1002:5957]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>>
>> Latency: 32
>> Region 3: Memory at <ignored> (64-bit, non-prefetchable)
>> Capabilities: <access denied>
>> 00: 02 10 57 59 06 00 30 22 00 00 00 06 00 20 00 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 57 59
>> 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI
>> bridge (external gfx0 port A) [1002:5978]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 4 bytes
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>> I/O behind bridge: 0000e000-0000efff
>> Memory behind bridge: fa000000-fcffffff
>> Prefetchable memory behind bridge:
>> 00000000d0000000-00000000dfffffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- <SERR- <PERR-
>> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: <access denied>
>> Kernel driver in use: pcieport-driver
>> Kernel modules: shpchp
>> 00: 02 10 78 59 07 04 10 00 00 00 04 06 01 00 01 00
>> 10: 00 00 00 00 00 00 00 00 00 01 01 00 e1 e1 00 00
>> 20: 00 fa f0 fc 01 d0 f1 df 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00
>>
>> 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI
>> bridge (PCI express gpp port F) [1002:597f]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 4 bytes
>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>> I/O behind bridge: 0000d000-0000dfff
>> Memory behind bridge: fdc00000-fdcfffff
>> Prefetchable memory behind bridge:
>> 00000000fdf00000-00000000fdffffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- <SERR- <PERR-
>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: <access denied>
>> Kernel driver in use: pcieport-driver
>> Kernel modules: shpchp
>> 00: 02 10 7f 59 07 04 10 00 00 00 04 06 01 00 01 00
>> 10: 00 00 00 00 00 00 00 00 00 02 02 00 d1 d1 00 00
>> 20: c0 fd c0 fd f1 fd f1 fd 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>>
>> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
>> Controller [AHCI mode] [1002:4391] (prog-if 01)
>> Subsystem: Giga-byte Technology Device [1458:b002]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32
>> Interrupt: pin A routed to IRQ 22
>> Region 0: I/O ports at ff00 [size=8]
>> Region 1: I/O ports at fe00 [size=4]
>> Region 2: I/O ports at fd00 [size=8]
>> Region 3: I/O ports at fc00 [size=4]
>> Region 4: I/O ports at fb00 [size=16]
>> Region 5: Memory at fe02f000 (32-bit, non-prefetchable)
>> [size=1K]
>> Capabilities: <access denied>
>> Kernel driver in use: ahci
>> 00: 02 10 91 43 07 00 30 02 00 01 06 01 00 20 00 00
>> 10: 01 ff 00 00 01 fe 00 00 01 fd 00 00 01 fc 00 00
>> 20: 01 fb 00 00 00 f0 02 fe 00 00 00 00 58 14 02 b0
>> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
>>
>> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>> OHCI0 Controller [1002:4397] (prog-if 10)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 4 bytes
>> Interrupt: pin A routed to IRQ 16
>> Region 0: Memory at fe02e000 (32-bit, non-prefetchable)
>> [size=4K]
>> Kernel driver in use: ohci_hcd
>> 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00
>> 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
>>
>> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
>> Controller [1002:4398] (prog-if 10)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 4 bytes
>> Interrupt: pin A routed to IRQ 16
>> Region 0: Memory at fe02d000 (32-bit, non-prefetchable)
>> [size=4K]
>> Kernel driver in use: ohci_hcd
>> 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00
>> 10: 00 d0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
>>
>> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>> EHCI Controller [1002:4396] (prog-if 20)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 64 bytes
>> Interrupt: pin B routed to IRQ 17
>> Region 0: Memory at fe02c000 (32-bit, non-prefetchable)
>> [size=256]
>> Capabilities: <access denied>
>> Kernel driver in use: ehci_hcd
>> 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00
>> 10: 00 c0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00
>>
>> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>> OHCI0 Controller [1002:4397] (prog-if 10)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 4 bytes
>> Interrupt: pin A routed to IRQ 18
>> Region 0: Memory at fe02b000 (32-bit, non-prefetchable)
>> [size=4K]
>> Kernel driver in use: ohci_hcd
>> 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00
>> 10: 00 b0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>>
>> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
>> Controller [1002:4398] (prog-if 10)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 4 bytes
>> Interrupt: pin A routed to IRQ 18
>> Region 0: Memory at fe02a000 (32-bit, non-prefetchable)
>> [size=4K]
>> Kernel driver in use: ohci_hcd
>> 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00
>> 10: 00 a0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>>
>> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>> EHCI Controller [1002:4396] (prog-if 20)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 64 bytes
>> Interrupt: pin B routed to IRQ 19
>> Region 0: Memory at fe029000 (32-bit, non-prefetchable)
>> [size=256]
>> Capabilities: <access denied>
>> Kernel driver in use: ehci_hcd
>> 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00
>> 10: 00 90 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 03 02 00 00
>>
>> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
>> [1002:4385] (rev 3c)
>> Subsystem: Giga-byte Technology Device [1458:4385]
>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Capabilities: <access denied>
>> Kernel modules: i2c-piix4
>> 00: 02 10 85 43 03 04 30 02 3c 00 05 0c 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 85 43
>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
>> Controller [1002:439c] (prog-if 8a [Master SecP PriP])
>> Subsystem: Giga-byte Technology Device [1458:5002]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32
>> Interrupt: pin A routed to IRQ 16
>> Region 0: I/O ports at 01f0 [size=8]
>> Region 1: I/O ports at 03f4 [size=1]
>> Region 2: I/O ports at 0170 [size=8]
>> Region 3: I/O ports at 0374 [size=1]
>> Region 4: I/O ports at fa00 [size=16]
>> Capabilities: <access denied>
>> Kernel driver in use: pata_atiixp
>> 00: 02 10 9c 43 05 00 30 02 00 8a 01 01 00 20 00 00
>> 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
>> 20: 01 fa 00 00 00 00 00 00 00 00 00 00 58 14 02 50
>> 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 01 00 00
>>
>> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
>> HDA) [1002:4383]
>> Subsystem: Giga-byte Technology Device [1458:a022]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 4 bytes
>> Interrupt: pin ? routed to IRQ 16
>> Region 0: Memory at fe024000 (64-bit, non-prefetchable)
>> [size=16K]
>> Capabilities: <access denied>
>> Kernel driver in use: HDA Intel
>> Kernel modules: snd-hda-intel
>> 00: 02 10 83 43 06 00 10 04 00 00 03 04 01 20 00 00
>> 10: 04 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 a0
>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 00 00 00
>>
>> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
>> controller [1002:439d]
>> Subsystem: ATI Technologies Inc SB700/SB800 LPC host
>> controller [1002:439d]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 0
>> 00: 02 10 9d 43 0f 00 20 02 00 00 01 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 9d 43
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
>> Bridge [1002:4384] (prog-if 01)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 64
>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
>> I/O behind bridge: 0000c000-0000cfff
>> Memory behind bridge: fde00000-fdefffff
>> Prefetchable memory behind bridge: fdd00000-fddfffff
>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>>
>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00
>> 10: 00 00 00 00 00 00 00 00 00 03 03 40 c0 c0 80 22
>> 20: e0 fd e0 fd d0 fd d0 fd 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>> OHCI2 Controller [1002:4399] (prog-if 10)
>> Subsystem: Giga-byte Technology Device [1458:5004]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32, Cache Line Size: 4 bytes
>> Interrupt: pin C routed to IRQ 18
>> Region 0: Memory at fe028000 (32-bit, non-prefetchable)
>> [size=4K]
>> Kernel driver in use: ohci_hcd
>> 00: 02 10 99 43 06 00 a0 02 00 10 03 0c 01 20 00 00
>> 10: 00 80 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
>>
>> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
>> Athlon64, Sempron] HyperTransport Configuration [1022:1200]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Capabilities: <access denied>
>> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
>> Athlon64, Sempron] Address Map [1022:1201]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
>> Athlon64, Sempron] DRAM Controller [1022:1202]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Kernel modules: amd64_edac_mod
>> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
>> Athlon64, Sempron] Miscellaneous Control [1022:1203]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Capabilities: <access denied>
>> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
>>
>> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
>> Athlon64, Sempron] Link Control [1022:1204]
>> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
>> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> 01:00.0 VGA compatible controller [0300]: nVidia Corporation G73
>> [GeForce 7600 GT] [10de:0391] (rev a1)
>> Subsystem: Giga-byte Technology Device [1458:3417]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 18
>> Region 0: Memory at fa000000 (32-bit, non-prefetchable)
>> [size=16M]
>> Region 1: Memory at d0000000 (64-bit, prefetchable)
>> [size=256M]
>> Region 3: Memory at fb000000 (64-bit, non-prefetchable)
>> [size=16M]
>> Region 5: I/O ports at ef00 [size=128]
>> [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
>> Capabilities: <access denied>
>> Kernel driver in use: nvidia
>> Kernel modules: nvidia, nvidiafb
>> 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00
>> 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 fb
>> 20: 00 00 00 00 01 ef 00 00 00 00 00 00 58 14 17 34
>> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
>>
>> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
>> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
>> 02)
>> Subsystem: Giga-byte Technology Device [1458:e000]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 27
>> Region 0: I/O ports at de00 [size=256]
>> Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
>> Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
>> [virtual] Expansion ROM at fdf00000 [disabled] [size=64K]
>> Capabilities: <access denied>
>> Kernel driver in use: r8169
>> Kernel modules: r8169
>> 00: ec 10 68 81 07 04 10 00 02 00 00 02 10 00 00 00
>> 10: 01 de 00 00 00 00 00 00 0c f0 ff fd 00 00 00 00
>> 20: 0c 00 fe fd 00 00 00 00 00 00 00 00 58 14 00 e0
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
>>
>> 03:06.0 Multimedia video controller [0400]: Brooktree Corporation
>> Bt878 Video Capture [109e:036e] (rev 11)
>> Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32 (4000ns min, 10000ns max)
>> Interrupt: pin A routed to IRQ 20
>> Region 0: Memory at fddff000 (32-bit, prefetchable) [size=4K]
>> Capabilities: <access denied>
>> Kernel driver in use: bttv
>> Kernel modules: bttv
>> 00: 9e 10 6e 03 06 00 90 02 11 00 00 04 00 20 80 00
>> 10: 08 f0 df fd 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 10 28
>>
>> 03:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878
>> Audio Capture [109e:0878] (rev 11)
>> Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32 (1000ns min, 63750ns max)
>> Interrupt: pin A routed to IRQ 20
>> Region 0: Memory at fddfe000 (32-bit, prefetchable) [size=4K]
>> Capabilities: <access denied>
>> Kernel driver in use: Bt87x
>> Kernel modules: snd-bt87x
>> 00: 9e 10 78 08 06 00 90 02 11 00 80 04 00 20 80 00
>> 10: 08 e0 df fd 00 00 00 00 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 04 ff
>>
>> 03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
>> IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10)
>> Subsystem: Giga-byte Technology Device [1458:1000]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>>
>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>
>> Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes
>> Interrupt: pin A routed to IRQ 22
>> Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
>> Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
>> Capabilities: <access denied>
>> Kernel driver in use: ohci1394
>> Kernel modules: firewire-ohci, ohci1394
>> 00: 4c 10 24 80 06 00 10 02 00 10 00 0c 01 20 00 00
>> 10: 00 f0 ef fd 00 80 ef fd 00 00 00 00 00 00 00 00
>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10
>> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
>>
>> _______________________________________________
>> flashrom mailing list
>> flashrom at flashrom.org
>> http://www.flashrom.org/mailman/listinfo/flashrom
>>
>
More information about the flashrom
mailing list