[flashrom] Flashrom write on a Gigabyte GA-MA770-UD3 motherboard
Stefan Reinauer
stepan at coresystems.de
Wed Sep 2 22:08:05 CEST 2009
On 02.09.2009, at 21:05, Davíð Þór Þórarinsson
<david.thor at gmail.com> wrote:
> Hello Carl-Daniel!
>
> Sorry for not getting to this sooner. I never got your e-mail
> yesterday because of the Gmail crash and I just got back home from
> work. See my answers below.
>
> On Tue, Sep 1, 2009 at 9:43 PM, Carl-Daniel
> Hailfinger<c-d.hailfinger.devel.2006 at gmx.net> wrote:
>> Hi Davíð,
>>
>> On 01.09.2009 20:39, Davíð Þór Þórarinsson wrote:
>>> Some interesting facts: The chipset in this product is not on your
>>> list of supported chipsets, nor is the motherboard found on your
>>> list
>>> of supported motherboards. the chipset according to the manual is
>>> North Bridge: AMD770, South Bridge: AMD SB710.
>>
>> We list everything in the SB700 family (SB700/SB710/SB750) as
>> SB700. I
>> have sent a patch to fix this and we'll commit it soon.
>>
>>
>>> And it worked like a charm!
>>>
>>
>> Glad to hear. We'll add your board to the list of working boards. It
>> would be nice if you could reply-all to this mail with the output
>> from
>> lspci -nnvvvxxx
>
> The lspci output is found at the end of the mail (below)
>
>>
>>
>>> During the flash update, both the motherboard and chipset were
>>> wrongly
>>> identified. Here is the output from the operation:
>>>
>>> flashrom v0.9.0-r631
>>> No coreboot table found
>>> Found Chipset "AMD SB700", enabling flash write... OK
>>> Found board "GIGABYTE GA-MA78GM-S2H", enabling flash write...
>>> FAILED!
>>>
>>
>> Hmmm. The Gigabyte board mismatch problem... we can't fix the problem
>> due to nonstandard PCI settings on these boards, but we can hide it.
>>
>> Would you mind downloading and compiling the latest flashrom version?
>> You can get it either from our subversion repository at
>> svn://coreboot.org/flashrom/trunk or a current snapshot from
>> http://qa.coreboot.org/snapshots/
>> The output of latest
>> flashrom -V
>> would be appreciated as well so I can check the effect of some recent
>> changes on your board.
>
> Sure thing. I downloaded the 0.9.1-r709 version from the snapshots but
> I am unable to get it to compile properly. Any idea what it could be?
> Here is the output:
>
> davidt at newthor:/tmp/flashrom-0.9.1-r709$ make
> Checking for a C compiler... found.
> Checking for pciutils and zlib... found.
> Checking for FTDI support... not found.
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o chipset_enable.o -c
> chipset_enable.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o board_enable.o -c board_enable.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o udelay.o -c udelay.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o jedec.o -c jedec.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o stm50flw0x0x.o -c stm50flw0x0x.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst28sf040.o -c sst28sf040.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o am29f040b.o -c am29f040b.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o mx29f002.o -c mx29f002.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o m29f400bt.o -c m29f400bt.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o pm29f002.o -c pm29f002.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o w49f002u.o -c w49f002u.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o 82802ab.o -c 82802ab.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o pm49fl00x.o -c pm49fl00x.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lf040.o -c sst49lf040.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o en29f002a.o -c en29f002a.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lfxxxc.o -c sst49lfxxxc.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o sst_fwhub.o -c sst_fwhub.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o layout.o -c layout.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o cbtable.o -c cbtable.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o flashchips.o -c flashchips.c
> cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1'
> -D'FLASHROM_VERSION="0.9.1-r709"' -o physmap.o -c physmap.c
> cc1: warnings being treated as errors
> physmap.c: In function ‘rdmsr’:
> physmap.c:146: error: dereferencing type-punned pointer will break
> strict-aliasing rules
> make: *** [physmap.o] Error 1
>
What's your compiler version? Adding -fno-strict-aliasing to your
CFLAGS should temporarily fix the issue.
Stefan
> Best regards,
>
> /David
>
>
>
>
> lspci output:
>
>
> 00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset
> Host Bridge [1002:5957]
> Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host
> Bridge [1002:5957]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 32
> Region 3: Memory at <ignored> (64-bit, non-prefetchable)
> Capabilities: <access denied>
> 00: 02 10 57 59 06 00 30 22 00 00 00 06 00 20 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 57 59
> 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
>
> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI
> bridge (external gfx0 port A) [1002:5978]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 4 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fa000000-fcffffff
> Prefetchable memory behind bridge:
> 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
> 00: 02 10 78 59 07 04 10 00 00 00 04 06 01 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 00 e1 e1 00 00
> 20: 00 fa f0 fc 01 d0 f1 df 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00
>
> 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI
> bridge (PCI express gpp port F) [1002:597f]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 4 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fdc00000-fdcfffff
> Prefetchable memory behind bridge:
> 00000000fdf00000-00000000fdffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
> 00: 02 10 7f 59 07 04 10 00 00 00 04 06 01 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 02 00 d1 d1 00 00
> 20: c0 fd c0 fd f1 fd f1 fd 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
> Controller [AHCI mode] [1002:4391] (prog-if 01)
> Subsystem: Giga-byte Technology Device [1458:b002]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 22
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: Memory at fe02f000 (32-bit, non-prefetchable)
> [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> 00: 02 10 91 43 07 00 30 02 00 01 06 01 00 20 00 00
> 10: 01 ff 00 00 01 fe 00 00 01 fd 00 00 01 fc 00 00
> 20: 01 fb 00 00 00 f0 02 fe 00 00 00 00 58 14 02 b0
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
>
> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> OHCI0 Controller [1002:4397] (prog-if 10)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe02e000 (32-bit, non-prefetchable)
> [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00
> 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
>
> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398] (prog-if 10)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe02d000 (32-bit, non-prefetchable)
> [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00
> 10: 00 d0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
>
> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> EHCI Controller [1002:4396] (prog-if 20)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fe02c000 (32-bit, non-prefetchable)
> [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00
> 10: 00 c0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00
>
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> OHCI0 Controller [1002:4397] (prog-if 10)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe02b000 (32-bit, non-prefetchable)
> [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00
> 10: 00 b0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398] (prog-if 10)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe02a000 (32-bit, non-prefetchable)
> [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00
> 10: 00 a0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> EHCI Controller [1002:4396] (prog-if 20)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at fe029000 (32-bit, non-prefetchable)
> [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00
> 10: 00 90 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 03 02 00 00
>
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
> [1002:4385] (rev 3c)
> Subsystem: Giga-byte Technology Device [1458:4385]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel modules: i2c-piix4
> 00: 02 10 85 43 03 04 30 02 3c 00 05 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 85 43
> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>
> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
> Controller [1002:439c] (prog-if 8a [Master SecP PriP])
> Subsystem: Giga-byte Technology Device [1458:5002]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at fa00 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: pata_atiixp
> 00: 02 10 9c 43 05 00 30 02 00 8a 01 01 00 20 00 00
> 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
> 20: 01 fa 00 00 00 00 00 00 00 00 00 00 58 14 02 50
> 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 01 00 00
>
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
> HDA) [1002:4383]
> Subsystem: Giga-byte Technology Device [1458:a022]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin ? routed to IRQ 16
> Region 0: Memory at fe024000 (64-bit, non-prefetchable)
> [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
> 00: 02 10 83 43 06 00 10 04 00 00 03 04 01 20 00 00
> 10: 04 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 a0
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 00 00 00
>
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
> controller [1002:439d]
> Subsystem: ATI Technologies Inc SB700/SB800 LPC host
> controller [1002:439d]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> 00: 02 10 9d 43 0f 00 20 02 00 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 9d 43
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
> Bridge [1002:4384] (prog-if 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fde00000-fdefffff
> Prefetchable memory behind bridge: fdd00000-fddfffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00
> 10: 00 00 00 00 00 00 00 00 00 03 03 40 c0 c0 80 22
> 20: e0 fd e0 fd d0 fd d0 fd 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> OHCI2 Controller [1002:4399] (prog-if 10)
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fe028000 (32-bit, non-prefetchable)
> [size=4K]
> Kernel driver in use: ohci_hcd
> 00: 02 10 99 43 06 00 a0 02 00 10 03 0c 01 20 00 00
> 10: 00 80 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] HyperTransport Configuration [1022:1200]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] Address Map [1022:1201]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] DRAM Controller [1022:1202]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel modules: amd64_edac_mod
> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] Miscellaneous Control [1022:1203]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron,
> Athlon64, Sempron] Link Control [1022:1204]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 01:00.0 VGA compatible controller [0300]: nVidia Corporation G73
> [GeForce 7600 GT] [10de:0391] (rev a1)
> Subsystem: Giga-byte Technology Device [1458:3417]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fa000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: Memory at d0000000 (64-bit, prefetchable)
> [size=256M]
> Region 3: Memory at fb000000 (64-bit, non-prefetchable)
> [size=16M]
> Region 5: I/O ports at ef00 [size=128]
> [virtual] Expansion ROM at fc000000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: nvidia
> Kernel modules: nvidia, nvidiafb
> 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00
> 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 fb
> 20: 00 00 00 00 01 ef 00 00 00 00 00 00 58 14 17 34
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
>
> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
> 02)
> Subsystem: Giga-byte Technology Device [1458:e000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 27
> Region 0: I/O ports at de00 [size=256]
> Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
> [virtual] Expansion ROM at fdf00000 [disabled] [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
> 00: ec 10 68 81 07 04 10 00 02 00 00 02 10 00 00 00
> 10: 01 de 00 00 00 00 00 00 0c f0 ff fd 00 00 00 00
> 20: 0c 00 fe fd 00 00 00 00 00 00 00 00 58 14 00 e0
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
>
> 03:06.0 Multimedia video controller [0400]: Brooktree Corporation
> Bt878 Video Capture [109e:036e] (rev 11)
> Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at fddff000 (32-bit, prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: bttv
> Kernel modules: bttv
> 00: 9e 10 6e 03 06 00 90 02 11 00 00 04 00 20 80 00
> 10: 08 f0 df fd 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 10 28
>
> 03:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878
> Audio Capture [109e:0878] (rev 11)
> Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at fddfe000 (32-bit, prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: Bt87x
> Kernel modules: snd-bt87x
> 00: 9e 10 78 08 06 00 90 02 11 00 80 04 00 20 80 00
> 10: 08 e0 df fd 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 04 ff
>
> 03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
> IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10)
> Subsystem: Giga-byte Technology Device [1458:1000]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at fdeff000 (32-bit, non-prefetchable)
> [size=2K]
> Region 1: Memory at fdef8000 (32-bit, non-prefetchable)
> [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: ohci1394
> Kernel modules: firewire-ohci, ohci1394
> 00: 4c 10 24 80 06 00 10 02 00 10 00 0c 01 20 00 00
> 10: 00 f0 ef fd 00 80 ef fd 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
>
More information about the flashrom
mailing list