[flashrom] Help writing Atmel AT26DF321 and read/writing Winbond W25X32

[Nando]

Hi flashrom,

Can anyone confirm receiving this email, and if so, is there any more
information from me, or assistance from you that can get the AT26DF321
written on a ICH8M HP 2510P?

Cheers,
Nando

On Thu, Nov 19, 2009 at 11:32 PM, Nando <nando4eva at gmail.com> wrote:

> Hi flashrom,
>
> I've patched the latest flashrom to allow me to dump my bios from Winbond
> W25x32 SPI bios chip. Strange thing is I got it to work ONCE successfully,
> with a dump that looks good. This worked once, in between hotswaps of the
> AT25DF321 chip and I haven't been able to duplicate the read again. I get an
> OPCODE 0x03 error with bios dump containg some data at starting few blocks
> followed by FFs.  Then I hotswap in a blank Atmel AT25DF321 and do a
>
> ./flashrom -w  /2510P-F0A-DUMP.ROM -V
>
> to try to create a copy of my bios, but I get write error starting at
> 0x3f0000. Now can't AT26DF321 bombs out immediately. I've documented more
> details here <http://forums.mydigitallife.info/showthread.php?p=179288>. I
> haven't tried writing the original W25X32 but would like to with the SLIC
> 2.10 string which exists in the range after 0x3f0000 as would others in that
> linked thread.
>
> Perhaps you can advise on how I can write that string *ONLY* into the bios?
> I know VPRO has some protections it can assign to the bios too, which may
> prevent that from happening.
>
> Regards,
> Nando
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20091125/a5f0a2c1/attachment.html>