[flashrom] [commit] r658 - trunk
svn at flashrom.org
svn at flashrom.org
Wed Jul 22 22:09:28 CEST 2009
Author: hailfinger
Date: 2009-07-22 22:09:28 +0200 (Wed, 22 Jul 2009)
New Revision: 658
Modified:
trunk/spi.c
Log:
Convert SPI write status register to multicommand infrastructure.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
Modified: trunk/spi.c
===================================================================
--- trunk/spi.c 2009-07-22 15:36:50 UTC (rev 657)
+++ trunk/spi.c 2009-07-22 20:09:28 UTC (rev 658)
@@ -754,21 +754,7 @@
result = spi_send_command(sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL);
if (result)
- printf_debug("%s failed", __func__);
- if (result == SPI_INVALID_OPCODE) {
- switch (spi_controller) {
- case SPI_CONTROLLER_ICH7:
- case SPI_CONTROLLER_ICH9:
- case SPI_CONTROLLER_VIA:
- printf_debug(" due to SPI master limitation, ignoring"
- " and hoping it will be run as PREOP\n");
- return 0;
- default:
- break;
- }
- }
- if (result)
- printf_debug("\n");
+ printf_debug("%s failed\n", __func__);
return result;
}
@@ -779,11 +765,30 @@
*/
int spi_write_status_register(int status)
{
- const unsigned char cmd[JEDEC_WRSR_OUTSIZE] =
- { JEDEC_WRSR, (unsigned char)status };
+ int result;
+ struct spi_command spicommands[] = {
+ {
+ .writecnt = JEDEC_EWSR_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_EWSR },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_WRSR_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
- /* Send WRSR (Write Status Register) */
- return spi_send_command(sizeof(cmd), 0, cmd, NULL);
+ result = spi_send_multicommand(spicommands);
+ if (result) {
+ printf_debug("%s failed during command execution\n", __func__);
+ }
+ return result;
}
int spi_byte_program(int addr, uint8_t byte)
@@ -810,7 +815,6 @@
result = spi_send_multicommand(spicommands);
if (result) {
printf_debug("%s failed during command execution\n", __func__);
- return result;
}
return result;
}
@@ -857,7 +861,6 @@
result = spi_send_multicommand(spicommands);
if (result) {
printf_debug("%s failed during command execution\n", __func__);
- return result;
}
return result;
}
@@ -871,11 +874,6 @@
/* If there is block protection in effect, unprotect it first. */
if ((status & 0x3c) != 0) {
printf_debug("Some block protection in effect, disabling\n");
- result = spi_write_status_enable();
- if (result) {
- printf_debug("spi_write_status_enable failed\n");
- return result;
- }
result = spi_write_status_register(status & ~0x3c);
if (result) {
printf_debug("spi_write_status_register failed\n");
More information about the flashrom
mailing list