[flashrom] [Patch] Board enable for Aopen vKM400 AM-S.

scott at gnuveau.net scott at gnuveau.net
Tue Jul 21 03:30:38 CEST 2009


Hi Luc,

Acked-by:  Scott Johnson (scott at gnuveau.net)

Glad I can help, and thanks so much for the good work.

Scott



On Tue, 21 Jul 2009, Luc Verhaegen wrote:

> On Mon, Jul 20, 2009 at 08:48:48PM -0400, scott at gnuveau.net wrote:
> > Hi Luc,
> >
> > Here is the output after applying the diff... very nice:
> >
> >
> >
> > flashrom v0.9.0-r654
> > No coreboot table found.
> > Found chipset "VIA VT8237", enabling flash write... OK.
> > This chipset supports the following protocols: Non-SPI.
> > Found board "AOpen vKM400 AM-s", enabling flash write... OK.
> > Calibrating delay loop... 501M loops per second, 100 myus = 97 us. OK.
> ...
> > Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xbf, id2 0xb7
> > Found chip "SST SST39SF040" (512 KB, Parallel) at physical address 0xfff80000.
> ...
>
> Great!
>
> For this type of board enable, and for such a popular chip, this here
> usually means that flashing will be all ok.
>
> Please reply with:
> Acked-by: FullName <emailaddress>
>
> So i can put this in the repository :)
>
> Thanks,
>
> Luc Verhaegen.
>





More information about the flashrom mailing list