[flashrom] Board enable for Aopen vKM400 AM-S (was "motherboard results")

[scott at gnuveau.net]

Thanks Luc.



On Tue, 21 Jul 2009, Luc Verhaegen wrote:

> On Mon, Jul 20, 2009 at 01:27:17PM -0400, scott at gnuveau.net wrote:
> > Hi,
> >
> > On Mon, 20 Jul 2009 scott at gnuveau.net wrote:
> >
> > > Hi Carldani,
> > >
> > > first board... a-open vKM400 AM-S:
>
> > > ------------------------------lspci output------------------------------
> > > 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge [1106:3205]
> > > 	Subsystem: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge [1106:3205]
>
> > > 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
>
> > > 00:09.0 Network controller [0280]: Intersil Corporation Prism 2.5 Wavelan chipset [1260:3873] (rev 01)
> > > 	Subsystem: Belkin Device [1799:0601]
>
> > > 00:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
> > > 	Subsystem: AOPEN Inc. Device [a0a0:0477]
>
> > > 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
> > > 	Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149]
>
> > > 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> > > 	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
>
> > > 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> > > 	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
>
> > > 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> > > 	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
>
> > > 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> > > 	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
>
> > > 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
> > > 	Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
>
> > > 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
> > > 	Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard [1106:3227]
>
> > > 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
> > > 	Subsystem: Avance Logic Inc. Device [4005:4720]
>
> > > 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA controller])
> > > 	Subsystem: ATI Technologies Inc Device [1002:2002]
>
> > > 01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
> > > 	Subsystem: ATI Technologies Inc Device [1002:2003]
>
> PCI id matches:
>
> 1) KM400: 0x1106, 0x3205, 0x1106, 0x3205
> 	Because it looks like this is the only aopen board with a km400.
>
> 2) rtl8139: 0x10EC, 0x8139, 0xa0a0, 0x0477
> 	Which ties us to Aopen (0xA0A0).
>
> 3) the board enable of course matches the ISA bridge; VT8237
> 	0x1106, 0x3227.
>
> The superio is an ITE8705F.
>
> Writing up the board enable right now... should come in in a bit.\
>
> Luc Verhaegen.
>