[flashrom] motherboard results
scott at gnuveau.net
scott at gnuveau.net
Mon Jul 20 19:27:17 CEST 2009
Hi,
latest build of flashrom -V output:
flashrom v0.9.0-r654
No coreboot table found.
Found chipset "VIA VT8237", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 373M loops per second, 100 myus = 102 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x21, id2 0x31, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x21, id2 0x31, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x3a, id2 0x5a
Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x3a, id2 0x5a
Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x3a, id2 0x5a
Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x3a, id2 0x5a
Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0x49, id2 0x4d
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x3a, id2 0x5a
Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x3a, id2 0x5a
Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x49, id2 0x4d
Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x21, id2 0x31, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x75, id2 0x01, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x49, id2 0x4d
Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x49, id2 0x4d
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x49, id2 0x4d
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x3a, id2 0x5a
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29EE011, 128 KB:
===
Probing disabled for Winbond W29EE011 because the probing sequence puts the
AMIC A49LF040A in a funky state.
Use 'flashrom -c W29EE011' if you have a board with this chip.
===
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x49, id2 0x4d
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS
probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x49, id2 0x4d
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
-----------------------------------------------------------------------------
Enjoy,
Scott
On Mon, 20 Jul 2009 scott at gnuveau.net wrote:
> Hi Carldani,
>
> first board... a-open vKM400 AM-S:
>
>
> Calibrating delay loop... 746M loops per second. OK.
> No coreboot table found.
> Found chipset "VIA VT8237", enabling flash write... OK.
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
> Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset detected
> Probing for AMIC Technology A25L40P, 512 KB: spi_command called, but no SPI chipset detected
> Probing for AMIC Technology A49LF040A, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for AMIC Technology A29040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
> Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset detected
> Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset detected
> Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset detected
> Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset detected
> Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0x3a, id2 0x5a
> Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset detected
> Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset detected
> Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset detected
> Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset detected
> Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset detected
> Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset detected
> Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
> Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset detected
> Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset detected
> Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset detected
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x49, id2 0x4d
> Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x21, id2 0x31, id1 parity violation
> Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x75, id2 0x1
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x49, id2 0x4d
> Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset detected
> Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset detected
> Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44
> Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x49, id2 0x4d
> Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x49, id2 0x4d
> Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
> Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset detected
> Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset detected
> Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset detected
> Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset detected
> Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Winbond W29EE011, 128 KB:
> ===
> Probing disabled for Winbond W29EE011 because the probing sequence puts the
> AMIC A49LF040A in a funky state.
> Use 'flashrom -c W29EE011' if you have a board with this chip.
> ===
> Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x49, id2 0x4d
> Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation
> Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x3a, id2 0x5a, id1 parity violation
> Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff
> Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x49, did 0x4d
> Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chipset detected
> Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset detected
> Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chipset detected
> Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chipset detected
> Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset detected
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found automatically.
>
>
> ------------------------------lspci output------------------------------
> 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge [1106:3205]
> Subsystem: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge [1106:3205]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 8
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [80] AGP version 3.5
> Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: agpgart-via
> Kernel modules: via-agp
> 00: 06 11 05 32 06 00 30 22 00 00 00 06 00 08 00 00
> 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 05 32
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 19 88 80 82 44 01 00 1b b9 88 80 82 44 00 00
> 50: 08 80 00 ca c0 85 40 40 e0 00 40 40 40 40 40 40
> 60: 82 aa 0a 20 ec 99 c0 13 47 2d 54 d0 b1 40 00 00
> 70: 02 c8 ee 01 21 0f 50 08 01 00 00 00 00 00 00 02
> 80: 02 c0 35 00 0b 0a 00 1f 02 03 00 00 00 00 00 00
> 90: 80 01 00 00 20 0f 01 00 00 00 9a 37 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 21 98 00 48
> b0: 7f 00 31 00 25 46 46 02 69 84 6a 01 f0 81 2d 08
> c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 17 a3 6b ea 07 1c f1 19 72 ff 00 00 61 72 74 01
> e0: 00 00 00 00 80 ff 01 00 a6 87 ee 00 00 96 33 40
> f0: 00 01 00 a0 84 00 84 00 0f 62 20 08 00 04 00 00
>
> 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: e8000000-e80fffff
> Prefetchable memory behind bridge: d8000000-e7ffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: shpchp
> 00: 06 11 98 b1 07 01 30 02 00 00 04 06 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 20 22
> 20: 00 e8 00 e8 00 d8 f0 e7 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 08 00
> 40: 01 c0 88 44 34 72 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:09.0 Network controller [0280]: Intersil Corporation Prism 2.5 Wavelan chipset [1260:3873] (rev 01)
> Subsystem: Belkin Device [1799:0601]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at e8100000 (32-bit, prefetchable) [size=4K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: hostap_pci
> Kernel modules: orinoco_pci, hostap_pci
> 00: 60 12 73 38 07 00 90 02 01 00 80 02 08 20 00 00
> 10: 08 00 10 e8 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 99 17 01 06
> 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 00 00
> 40: 80 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 7e
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
> Subsystem: AOPEN Inc. Device [a0a0:0477]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at e000 [size=256]
> Region 1: Memory at e8101000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: 8139too
> Kernel modules: 8139cp, 8139too
> 00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
> 10: 01 e0 00 00 00 10 10 e8 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 a0 a0 77 04
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
> Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin B routed to IRQ 20
> Region 0: I/O ports at e100 [size=8]
> Region 1: I/O ports at e200 [size=4]
> Region 2: I/O ports at e300 [size=8]
> Region 3: I/O ports at e400 [size=4]
> Region 4: I/O ports at e500 [size=16]
> Region 5: I/O ports at e600 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: sata_via
> Kernel modules: sata_via
> 00: 06 11 49 31 07 00 90 02 80 00 04 01 00 20 80 00
> 10: 01 e1 00 00 01 e2 00 00 01 e3 00 00 01 e4 00 00
> 20: 01 e5 00 00 01 e6 00 00 00 00 00 00 06 11 49 31
> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 02 00 00
> 40: 33 03 f1 44 06 af 00 00 10 82 05 03 00 00 00 00
> 50: 00 00 00 00 00 00 04 04 00 10 10 00 05 00 10 00
> 60: 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 01 00 01 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 e0 82 37 00 10 85 37
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 80 02 49 31 06 11 49 31 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
> Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 20
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
> Region 4: I/O ports at e700 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: VIA_IDE
> Kernel modules: via82cxxx
> 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 e7 00 00 00 00 00 00 00 00 00 00 06 11 71 05
> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00
> 40: 3b 02 09 05 18 8c c0 00 5d 5d 5d 20 ff 00 b6 20
> 50: 17 17 17 e1 0c 00 00 00 a8 a8 a8 a8 00 00 00 00
> 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
> 70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
> 80: 00 30 83 37 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00
>
> 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 4: I/O ports at e800 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 e8 00 00 00 00 00 00 00 00 00 00 06 11 38 30
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0c 01 00 00
> 40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
> 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 4: I/O ports at e900 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 e9 00 00 00 00 00 00 00 00 00 00 06 11 38 30
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0c 01 00 00
> 40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
> 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at ea00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 ea 00 00 00 00 00 00 00 00 00 00 06 11 38 30
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
> 40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
> 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at eb00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 eb 00 00 00 00 00 00 00 00 00 00 06 11 38 30
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
> 40: 40 12 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
>
> 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 21
> Region 0: Memory at e8102000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME+
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
> 00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 20 80 00
> 10: 00 20 10 e8 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 03 00 00
> 40: 00 00 03 00 00 00 00 00 a8 20 00 09 00 00 00 00
> 50: 00 5a 00 80 00 00 00 00 04 0b 88 88 03 88 88 00
> 60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 c0
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 00 c2 ff 00 80 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 88 00 00 00 00 00 00 00 00 00
>
> 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
> Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard [1106:3227]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: i2c-viapro
> 00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 27 32
> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
> 40: 54 7f f8 0b 00 00 00 00 0c 20 00 00 44 00 08 08
> 50: 80 89 09 00 00 00 00 00 42 80 00 09 00 00 00 00
> 60: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
> 70: 06 11 27 32 00 00 00 00 00 00 00 00 20 00 00 00
> 80: 20 84 59 00 fa 10 00 00 01 40 00 00 00 00 00 00
> 90: 00 84 d8 88 b0 40 0e 00 00 07 25 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 01 50 01 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00
>
> 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
> Subsystem: Avance Logic Inc. Device [4005:4720]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 22
> Region 0: I/O ports at ec00 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: VIA 82xx Audio
> Kernel modules: snd-via82xx
> 00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
> 10: 01 ec 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 05 40 20 47
> 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 03 00 00
> 40: 01 cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA controller])
> Subsystem: ATI Technologies Inc Device [1002:2002]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (2000ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at d000 [size=256]
> Region 2: Memory at e8030000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at e8000000 [disabled] [size=128K]
> Capabilities: [58] AGP version 3.0
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
> Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: radeonfb
> 00: 02 10 60 59 07 00 b0 02 01 00 00 03 08 20 80 00
> 10: 08 00 00 d8 01 d0 00 00 00 00 03 e8 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 20
> 30: 00 00 00 00 58 00 00 00 00 00 00 00 0c 01 08 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 20
> 50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff
> 60: 02 03 00 1f 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
> Subsystem: ATI Technologies Inc Device [1002:2003]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Region 0: Memory at e0000000 (32-bit, prefetchable) [disabled] [size=128M]
> Region 1: Memory at e8020000 (32-bit, non-prefetchable) [disabled] [size=64K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: 02 10 40 59 00 00 b0 02 01 00 80 03 08 20 00 00
> 10: 08 00 00 e0 00 00 02 e8 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 20
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff
> 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>
> -------------------------------second board---------------------------------
>
> msi ms-6570
>
> coming in next mail.
>
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
>
More information about the flashrom
mailing list