[flashrom] [commit] r653 - trunk
svn at flashrom.org
svn at flashrom.org
Tue Jul 14 12:26:56 CEST 2009
Author: hailfinger
Date: 2009-07-14 12:26:56 +0200 (Tue, 14 Jul 2009)
New Revision: 653
Modified:
trunk/ft2232_spi.c
trunk/ichspi.c
trunk/it87spi.c
trunk/sb600spi.c
trunk/spi.h
trunk/wbsio_spi.c
Log:
Use a distinct return code for SPI commands with unsupported/invalid
length.
Some drivers support only a few combinations of read/write length and
return error otherwise. Having a distinct return code for this error
means we can handle it in upper layers.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
Modified: trunk/ft2232_spi.c
===================================================================
--- trunk/ft2232_spi.c 2009-07-13 12:40:17 UTC (rev 652)
+++ trunk/ft2232_spi.c 2009-07-14 10:26:56 UTC (rev 653)
@@ -201,6 +201,9 @@
unsigned char port_val = 0;
int i, ret = 0;
+ if (writecnt > 65536 || readcnt > 65536)
+ return SPI_INVALID_LENGTH;
+
buf = realloc(buf, writecnt + readcnt + 100);
if (!buf) {
fprintf(stderr, "Out of memory!\n");
Modified: trunk/ichspi.c
===================================================================
--- trunk/ichspi.c 2009-07-13 12:40:17 UTC (rev 652)
+++ trunk/ichspi.c 2009-07-14 10:26:56 UTC (rev 653)
@@ -599,10 +599,16 @@
{
switch (spi_controller) {
case SPI_CONTROLLER_VIA:
+ if (datalength > 16)
+ return SPI_INVALID_LENGTH;
return ich7_run_opcode(op, offset, datalength, data, 16);
case SPI_CONTROLLER_ICH7:
+ if (datalength > 64)
+ return SPI_INVALID_LENGTH;
return ich7_run_opcode(op, offset, datalength, data, 64);
case SPI_CONTROLLER_ICH9:
+ if (datalength > 64)
+ return SPI_INVALID_LENGTH;
return ich9_run_opcode(op, offset, datalength, data);
default:
printf_debug("%s: unsupported chipset\n", __FUNCTION__);
@@ -686,6 +692,7 @@
const unsigned char *writearr, unsigned char *readarr)
{
int a;
+ int result;
int opcode_index = -1;
const unsigned char cmd = *writearr;
OPCODE *opcode;
@@ -728,10 +735,10 @@
count = readcnt;
}
- if (run_opcode(*opcode, addr, count, data) != 0) {
+ result = run_opcode(*opcode, addr, count, data);
+ if (result) {
printf_debug("run OPCODE 0x%02x failed\n", opcode->opcode);
- return 1;
}
- return 0;
+ return result;
}
Modified: trunk/it87spi.c
===================================================================
--- trunk/it87spi.c 2009-07-13 12:40:17 UTC (rev 652)
+++ trunk/it87spi.c 2009-07-14 10:26:56 UTC (rev 653)
@@ -170,7 +170,7 @@
if (readcnt > 3) {
printf("%s called with unsupported readcnt %i.\n",
__FUNCTION__, readcnt);
- return 1;
+ return SPI_INVALID_LENGTH;
}
switch (writecnt) {
case 1:
@@ -200,7 +200,7 @@
default:
printf("%s called with unsupported writecnt %i.\n",
__FUNCTION__, writecnt);
- return 1;
+ return SPI_INVALID_LENGTH;
}
/*
* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
Modified: trunk/sb600spi.c
===================================================================
--- trunk/sb600spi.c 2009-07-13 12:40:17 UTC (rev 652)
+++ trunk/sb600spi.c 2009-07-14 10:26:56 UTC (rev 653)
@@ -114,14 +114,14 @@
if (readcnt > 8) {
printf("%s, SB600 SPI controller can not receive %d bytes, "
- "which is limited with 8 bytes\n", __func__, readcnt);
- return 1;
+ "it is limited to 8 bytes\n", __func__, readcnt);
+ return SPI_INVALID_LENGTH;
}
if (writecnt > 8) {
- printf("%s, SB600 SPI controller can not sent %d bytes, "
- "which is limited with 8 bytes\n", __func__, writecnt);
- return 1;
+ printf("%s, SB600 SPI controller can not send %d bytes, "
+ "it is limited to 8 bytes\n", __func__, writecnt);
+ return SPI_INVALID_LENGTH;
}
mmio_writeb(cmd, sb600_spibar + 0);
Modified: trunk/spi.h
===================================================================
--- trunk/spi.h 2009-07-13 12:40:17 UTC (rev 652)
+++ trunk/spi.h 2009-07-14 10:26:56 UTC (rev 653)
@@ -108,5 +108,6 @@
/* Error codes */
#define SPI_INVALID_OPCODE -2
#define SPI_INVALID_ADDRESS -3
+#define SPI_INVALID_LENGTH -4
#endif /* !__SPI_H__ */
Modified: trunk/wbsio_spi.c
===================================================================
--- trunk/wbsio_spi.c 2009-07-13 12:40:17 UTC (rev 652)
+++ trunk/wbsio_spi.c 2009-07-14 10:26:56 UTC (rev 653)
@@ -154,7 +154,8 @@
if (!mode) {
fprintf(stderr, "%s: unsupported command type wr=%d rd=%d\n",
__func__, writecnt, readcnt);
- return 1;
+ /* Command type refers to the number of bytes read/written. */
+ return SPI_INVALID_LENGTH;
}
OUTB(writearr[0], wbsio_spibase);
More information about the flashrom
mailing list