[flashrom] [PATCH] Add ICH9 Engineering sample to chipset enables
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Fri Aug 21 19:21:37 CEST 2009
forwarding to list...
-------- Original Message --------
Subject: RE: [flashrom] [PATCH] Add ICH9 Engineering sample to chipset
enables
Date: Fri, 21 Aug 2009 18:41:36 +0200
From: LE COQ ANNYVONNE <Annyvonne.Le_Coq at alcatel-lucent.fr>
To: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
References: <4A8EB02D.9000607 at gmx.net>
Acked-by: Anne Le Coq <annyvonne.le_coq at alcatel-lucent.fr>
Hi Carl-Daniel,
It's the modification I've done to accept the ICH9, and it works fine. I just mention "ICH9" instead of "ICH9 Engineering Sample", but I don't think it's very important.
My problem now is that the opcode 06 is unknown in the opcode table.
To continue my test, I replace one of unused opcode (0B9H) by 06 and it's better. But it's not a good solution...
Then, after that, I can only read, write and erase my flash till A000H.
I think it's because I use the ICH9 in descriptor mode.
I have the following fault:
ERROR at 0x0000a000: Expected=0xff, Read=0x00
Have you got an idea about this issue ?
Thanks
Anne
More information about the flashrom
mailing list