[flashrom] flashrom -V output on Asus P4P800-E Deluxe
crnibojan
crnibojan at gmail.com
Tue Aug 11 20:40:02 CEST 2009
Attached output from lspci when run as root
Br,
Bojan
2009/8/11 crnibojan <crnibojan at gmail.com>:
> Please find attached output from
>
> lspci -nnvvvxxxx
>
>
> Br,
> Bojan
>
>
>
> 2009/8/11 crnibojan <crnibojan at gmail.com>:
>> Hello!
>>
>> Here it is output from flashrom -V on Asus P4P800-E Deluxe
>>
>> flashrom v0.9.0-r676
>> No coreboot table found.
>> Found chipset "Intel ICH5/ICH5R", enabling flash write...
>> BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
>> OK.
>> This chipset supports the following protocols: Non-SPI.
>> Calibrating delay loop... 787M loops per second, 100 myus = 162 us. OK.
>> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x2b, id2 0xeb
>> Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
>> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
>> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
>> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
>> Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
>> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x9d, id2 0x6e
>> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x9d, id2 0x6e
>> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0x6d, id2 0x48
>> Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0x6d, id2 0x48
>> Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000.
>> Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
>> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
>> Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xff, id2 0xff,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
>> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip
>> bus type SPI are incompatible.
>> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip
>> bus type SPI are incompatible.
>> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
>> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
>> Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e
>> Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e
>> Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
>> Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
>> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x6d, id2 0x48
>> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
>> Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe
>> timing information, using default 10mS/40uS. probe_jedec: id1 0x9d,
>> id2 0x6e
>> Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and
>> chip bus type SPI are incompatible.
>> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI
>> and chip bus type SPI are incompatible.
>> Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond
>> W29EE011 because the probing sequence puts the AMIC A49LF040A in a
>> funky state. Use 'flashrom -c W29EE011' if you have a board with this
>> chip.
>> Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x9d, id2 0x6e
>> Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2
>> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash content
>> Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec: id1 0x9d, id2 0x6e
>> Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff
>> Probing for Winbond W39V080FA (dual mode), 512 KB:
>> probe_winbond_fwhub: id1 0x9d, id2 0x6e
>> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host
>> bus type Non-SPI and chip bus type SPI are incompatible.
>> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type
>> Non-SPI and chip bus type SPI are incompatible.
>> No operations were specified.
>>
>>
>> Best regards,
>> Bojan Radakovic
>>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lscpi-nnvvvxxxx-on-asus-p4p800-e-deluxe-2.log
Type: application/octet-stream
Size: 26128 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20090811/7abff043/attachment.obj>
More information about the flashrom
mailing list