[flashrom] ICH6-ICH10 flash decode debug, IDSEL=0 hardcode

[Stefan Reinauer]

On 06.08.2009, at 19:38, Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net 
 > wrote:

> Add ICH6,ICH7,ICH8,ICH9,ICH10 FWH IDSEL settings and flash decode
> settings to the debug output. This can help debug cases where the BIOS
> does not set up a correct flash decode for the given flash size.
> The Intel docs state that the decode applies to FWH and SPI flash.
>
> Hardcode IDSEL=0 for the top 8 MB for now.
>
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net 
> >
>
>



> +    printf("\nSetting IDSEL=0 for top 8 MB");
> +    pci_write_word(dev, 0xd0, 0x00000000);

Is this supposed to be a 16bit or 32bit write?

>    return enable_flash_ich(dev, name, 0xdc);
> }
>

Stefan