<pre>> The i815 is currently unsupported, I've been planning on looking at it<br>> once I finish with another board, if noone beats me to it. The 82801AA<br>> should be easy to get going, as it will probably work with the other
<br>> 82801xx code already in linuxbios (perhaps a couple small changes).<br><br>> -Corey<br><br>I am new to LinuxBIOS. It's nice to hear someone is intrested i815 support. <br><br>Hardware info:<br>Cpu PGA370 socket 700 Mhz Celeron Coppermine. Bridges FW82815 FW82801AA There is also N82802AB8 chip.
<br>This is possibly Fujitsu Siemens Scenic T Motherboard.<br><br>lspci:<br>0000:00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)<br>0000:00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02)
<br>0000:00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)<br>0000:00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)<br>0000:00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02)
<br>0000:00:1f.2 USB Controller: Intel Corporation 82801AA USB (rev 02)<br>0000:00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev 02)<br>0000:01:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)<br>
0000:01:09.0 Ethernet controller: Advanced Micro Devices [AMD] 79c978 [HomePNA] (rev 52)<br><br>Super I/O chip is LPC 47M107S-MC <a href="http://www.smsc.com/main/catalog/lpc47m10x.html">http://www.smsc.com/main/catalog/lpc47m10x.html
</a><br>It's TSOP bios device :(<br><br>Flashrom can write the bios. I tested it but before rebooting wrote original bios back.<br><br>Are Qemu messages intresting in this case?<br><br>Jouni<br></pre>