[coreboot] Kabylake unable to boot with post code 0x71

Tue Sep 18 17:09:45 CEST 2018

Hi Jose,

Ideally, FSP silicon init returns if there is error & error code is displayed.
Since return has not happended then it is most likely that input to
FSPS UPD which comes from devicetree.cb might have gone wrong.
In other word, can you match devicetree.cb setting with descriptor &
board schematics.
Especially check: domain_vr_config

Additionally can you provide info like when the hang happens, what is
state of SLP_S0/3/4/5.
Also check voltage level for VCC_CORE/GT/SA

Regards,
Naresh G Solanki
On Tue, Sep 18, 2018 at 3:01 PM Jose Trujillo via coreboot
<coreboot at coreboot.org> wrote:
>
> Dear Naresh / All:
>
> I added their corresponding FSP headers but still the system never returns from the FSP function (fsp_silicon_init) post 0x71.
>
> My question is if somebody can tell me how to enable (if possible) FSP port 80 post codes and/or FSP serial debug from SIO (non SOC) UART.
>
> Thank you,
> Jose Trujillo
>
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Monday, September 17, 2018 6:14 PM, Naresh G. Solanki <naresh.solanki.2011 at gmail.com> wrote:
>
> > Location in coreboot folder:
> > https://review.coreboot.org/cgit/coreboot.git/tree/src/vendorcode/intel/fsp/fsp2_0/skykabylake
> >
> > Header Files can be taken from location:
> > https://github.com/IntelFsp/FSP/tree/master/KabylakeFspBinPkg/Include
> >
> > FSP binary can be taken from:
> > https://github.com/IntelFsp/FSP/blob/master/KabylakeFspBinPkg/Fsp.fd
> >
> > This file needs to be split into fspm.bin fsps.bin . For this refer:
> > https://github.com/tianocore/edk2/blob/master/IntelFsp2Pkg/Tools/UserManuals/SplitFspBinUserManual.md
> > On Mon, Sep 17, 2018 at 7:51 PM Jose Trujillo ce.autom at protonmail.com wrote:
> >
> > > Thank you Naresh,
> > > How to do the copy?
> > > Could you give me some details?
> > > You too have an excellent day.
> > > Jose.
> > > Sent with ProtonMail Secure Email.
> > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > On Monday, September 17, 2018 5:17 PM, Naresh G. Solanki naresh.solanki.2011 at gmail.com wrote:
> > > I guess the FSP version you have is 3.5.0
> > > You should have received fsp header along with fsp binary in single package.
> > > However you can get FSP binaries and header from https://github.com/IntelFsp/FSP
> > > Also make sure you copy FSP header version equal fsp binary version.
> > > All the best!
> > > On Mon 17 Sep, 2018, 3:34 PM Jose Trujillo via coreboot, coreboot at coreboot.org wrote:
> > >
> > > > Dear Naresh:
> > > > You are right; it never returns from the FSP function (fsp_silicon_init).
> > > > chip_fsp20.c Ln.169
> > > > void soc_init_pre_device(void chip_info)
> > > > {
> > > > printk(BIOS_INFO, "Entering: fsp_silicon_init"); // Added
> > > > / Perform silicon specific init. /
> > > > fsp_silicon_init(romstage_handoff_is_resume());
> > > > / swap enabled PCI ports in device tree if needed */printk(BIOS_INFO, "Entering: pcie_override_devicetree"); // Added
> > > > pcie_override_devicetree_after_silicon_init();
> > > > printk(BIOS_INFO, "Exit: soc_init_pre_device"); // Added
> > > > }
> > > > Serial dump.
> > > > ....
> > > > Enabling SMIs.
> > > > Locking SMM.
> > > > VMX : param.enable = 0
> > > > VMX: pre-conditions not met
> > > > VMX: pre-conditions not met
> > > > VMX: pre-conditions not met
> > > > SGX: pre-conditions not met
> > > > VMX: pre-conditions not met
> > > > SGX: pre-conditions not met
> > > > POST: 0x71
> > > > SGX: pre-conditions not met
> > > > SGX: pre-conditions not met
> > > > Entering: fsp_silicon_init <------ never returns from FSP.
> > > > ....
> > > > About the FSP header version I am not sure how exactly to obtain it but getting the binary decription from BCT I got:
> > > > Header Revision: 0x3
> > > > Image Revision: 0x3050000
> > > > 3.0.5 ????
> > > > See the attached file for more details about the FSP binary.
> > > > Please advise.
> > > > Thank you,
> > > > Jose Trujillo.
> > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > On Friday, September 14, 2018 6:58 PM, Naresh G. Solanki naresh.solanki.2011 at gmail.com wrote:
> > > >
> > > > > With available data. It is most likely that it might have stuck
> > > > > somewhere in function
> > > > > https://review.coreboot.org/cgit/coreboot.git/tree/src/soc/intel/skylake/chip_fsp20.c#n169
> > > > > You can add printk in that function & other functions called by it to
> > > > > bisect & confirm the exact position of hang..
> > > > > Also can you please check FSP binary version you are using versus FSP
> > > > > header version checked-out in coreboot(which is currently 2.9.2).
> > > > > They should be
> > > > > On Fri, Sep 14, 2018 at 7:55 PM Jose Trujillo via coreboot
> > > > > coreboot at coreboot.org wrote:
> > > > >
> > > > > > Here is Naresh....
> > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > > > On Friday, September 14, 2018 4:49 PM, Naresh G. Solanki naresh.solanki.2011 at gmail.com wrote:
> > > > > > Can you also provide latest complete log.
> > > > > > On Fri 14 Sep, 2018, 2:10 PM Jose Trujillo via coreboot, coreboot at coreboot.org wrote:
> > > > > >
> > > > > > > Thank you Naresh,
> > > > > > > I added the missing PCH device id following your advise, also enabled DEBUG_BOOT_STATE but I am still not able to get more information via serial debug about the exact location of the problem (but now I am certain is in the coreboot code not in FSP).
> > > > > > > I suspect the code involved aound this issue is hardwaremain.c and device.c....
> > > > > > > Only the first "boot" just after flash I notice that the ethernet and SATA LEDs blink for a fraction of a second then reboots.
> > > > > > > After that, the following attempts to boot I don't see LED activity neither reboots, just halted in some kind of loop.
> > > > > > > According to the serial dump the las printed text is "0x71" but my question is if the serial port gets broken still during "BS_DEV_INIT_CHIPS" or is already doing "BS_DEV_ENUMERATE".
> > > > > > > As Naresh pointed my PCH H chipset "Kabylake-H HM175" was not added to the list; I added it but may be is needed to do something else to make it work.
> > > > > > > Or istill is misconfigured (attached my .config file for your review)... I someone has a similar system working and want to share its configuration files to compare them myself I will be grateful.
> > > > > > > Jose Trujillo.
> > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > > > > On Wednesday, 12 September 2018 19:33, Naresh G. Solanki naresh.solanki.2011 at gmail.com wrote:
> > > > > > > Hi
> > > > > > >
> > > > > > > > PCH: device id a152 (rev 31) is Unknown
> > > > > > >
> > > > > > > This indicates that LPCID 0xa152 is not added.
> > > > > > > The #define should be added in source path: https://review.coreboot.org/cgit/coreboot.git/tree/src/include/device/pci_ids.h#n2721
> > > > > > > https://review.coreboot.org/cgit/coreboot.git/tree/src/soc/intel/common/block/lpc/lpc.c#n131
> > > > > > > &
> > > > > > > https://review.coreboot.org/cgit/coreboot.git/tree/src/soc/intel/skylake/bootblock/report_platform.c#n73
> > > > > > > as well.
> > > > > > > Additionally you can enable config DEBUG_BOOT_STATE to understand where exactly its stuck.
> > > > > > > Regards,
> > > > > > > Naresh G. Solanki
> > > > > > > On Wed, Sep 12, 2018 at 9:24 PM Jose Trujillo via coreboot coreboot at coreboot.org wrote:
> > > > > > >
> > > > > > > > Dear All,
> > > > > > > > About the memory I just changed the dimm to address A0 and now coreboot is reporting correctly 1 dimm detected.
> > > > > > > > But still no luck on the 0x71 post code loop (looks it is in some kind of loop because is still responsive to power and reset buttons).
> > > > > > > > I don't know where this loop could be located (coreboot or FSP).
> > > > > > > > The description on the post_codes.h file shows the following:
> > > > > > > > ....
> > > > > > > > /**
> > > > > > > >
> > > > > > > > -   \brief Initializing Chips
> > > > > > > > -
> > > > > > > > -   Boot State Machine: bs_dev_init_chips()
> > > > > > > >     */
> > > > > > > >     #define POST_BS_DEV_INIT_CHIPS 0x71
> > > > > > > >     ....
> > > > > > > >
> > > > > > > >
> > > > > > > > Any advice on this issue?
> > > > > > > > Attached is the serial dump with extra information.
> > > > > > > > Thank you
> > > > > > > > Jose Trujillo
> > > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > > > > > On Wednesday, 12 September 2018 16:12, Jose Trujillo ce.autom at protonmail.com wrote:
> > > > > > > > To begin with the system didn't find memory attached...
> > > > > > > > but there is memory attached, SPD address mismatch? I will check.
> > > > > > > > ....
> > > > > > > > .......Timeout while sending command 0x0d to EC!
> > > > > > > > recv_ec_data: 0xff
> > > > > > > > recv_ec_data: 0xff
> > > > > > > > SPD index 7
> > > > > > > > No memory dimm at address A0
> > > > > > > > No memory dimm at address A2
> > > > > > > > No memory dimm at address A6
> > > > > > > > ....
> > > > > > > > 0 DIMMs found
> > > > > > > > ....
> > > > > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > > > > > > > On Wednesday, 12 September 2018 13:29, Jose Trujillo via coreboot coreboot at coreboot.org wrote:
> > > > > > > > Dear coreboot engineers:
> > > > > > > > Right now I am stuck with a Kabylake system with the following message:
> > > > > > > > ....
> > > > > > > > CPU #1 initialized
> > > > > > > > apic_id: 0x06 done.
> > > > > > > > microcode: updated to revision 0x8d date=2018-01-21
> > > > > > > > CPU #3 initialized
> > > > > > > > bsp_do_flight_plan done after 220 msecs.
> > > > > > > > CPU: frequency set to 3600 MHz
> > > > > > > > Enabling SMIs.
> > > > > > > > Locking SMM.
> > > > > > > > VMX : param.enable = 0
> > > > > > > > VMX: pre-conditions not met
> > > > > > > > SGX: pre-conditions not met
> > > > > > > > VMX: pre-conditions not met
> > > > > > > > VMX: pre-conditions not met
> > > > > > > > SGX: pre-conditions not met
> > > > > > > > SGX: pre-conditions not met
> > > > > > > > VMX: pre-conditions not met
> > > > > > > > SGX: pre-conditions not met
> > > > > > > > POST: 0x71
> > > > > > > > ....
> > > > > > > > May be some configuration is missing and I am trying to find this out myself but if someone of you can give a hint on how to resolve it I will be grateful.
> > > > > > > > Attached is the full serial dump.
> > > > > > > > Thank you,
> > > > > > > > Jose Trujillo
> > > > > > > >
> > > > > > > > ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > > > > > > >
> > > > > > > > coreboot mailing list: coreboot at coreboot.org
> > > > > > > > https://mail.coreboot.org/mailman/listinfo/coreboot
> > > > > > >
> > > > > > > --
> > > > > > > Best regards,
> > > > > > > Naresh G. Solanki
> > > > > > >
> > > > > > > -----------------------------------
> > > > > > >
> > > > > > > coreboot mailing list: coreboot at coreboot.org
> > > > > > > https://mail.coreboot.org/mailman/listinfo/coreboot
> > > > > >
> > > > > > --
> > > > > > coreboot mailing list: coreboot at coreboot.org
> > > > > > https://mail.coreboot.org/mailman/listinfo/coreboot
> > > > >
> > > > > --
> > > > > Best regards,
> > > > > Naresh G. Solanki
> > > >
> > > > --
> > > > coreboot mailing list: coreboot at coreboot.org
> > > > https://mail.coreboot.org/mailman/listinfo/coreboot
> >
> > --
> >
> > Best regards,
> > Naresh G. Solanki
>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://mail.coreboot.org/mailman/listinfo/coreboot

-- 
Best regards,
Naresh G. Solanki