[coreboot] Change superio in "Bayley Bay FSP-based CRB"
veredz72 at gmail.com
Sun Oct 7 23:02:14 CEST 2018
I have to port coreboot to a "Bay Trail" board (KONTRON).
I selected "Bayley Bay FSP-based CRB" as a reference.
In my board, the output of superiotool is:
Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x41) at 0x2e
But the configuration of the reference board is:
*** Super I/O ***
How can I change it ?
I wish there was a basic configuration that could be easily modified.
More information about the coreboot