[coreboot] Video not seen with BayTrail-I platform Board which has DVI/HDMI interface

Jose Trujillo ce.autom at protonmail.com
Thu Nov 8 11:16:10 CET 2018


Hello Ranga:

If you are using tianocore as payload you should choose vesa framebuffer option and text mode in seabios
JT

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Thursday, November 8, 2018 1:08 PM, galla rao <galla.rao80 at gmail.com> wrote:

> Hi All,
>
> Am facing Gfx Enablement failure, i don't see any Video output on my screen
>
> Config file has below settings
>
> CONFIG_VGA_BIOS_ID="8086,0f31"
>  CONFIG_DRIVERS_PS2_KEYBOARD is not set
>  CONFIG_ONBOARD_VGA_IS_PRIMARY=y
> CONFIG_VGA_BIOS=y
> CONFIG_UDELAY_IO is not set
> CONFIG_DCACHE_RAM_BASE=0xfef00000
> CONFIG_DCACHE_RAM_SIZE=0x4000
>  CONFIG_ACPI_SSDTX_NUM=0
> CONFIG_VGA_BIOS_FILE="../intel/cpu/baytrail/vbios/Vga.dat"
>  CONFIG_PCI_64BIT_PREF_MEM is not set
>
> BIOS log specific to Video output onto terminal
>
> ------------------------ VLV SSA Platform Policy dump Begin ---------------
> Graphics Configuration:
>  GttSize : 2 MB
>  IgdDvmt50PreAlloc : 2
>  PrimaryDisplay : 0
>  ApertureSize : 2
>  Turbo Enable : 1
>
> IGD enabled.
>
> dGFXBase         =  0x7BE00000
>
> Do i need to configure any setting in \FSP-master\FSP-master\BayTrailFspBinPkg\Vbios\vga.bsf file from BCT?
>
> Please let me know what could be the reason and if anyone has seen such behavior earlier
>
> Best Regards
> Ranga
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20181108/bf6a1c03/attachment.html>


More information about the coreboot mailing list