[coreboot] Minnowboard

[Zoran Stojsavljevic]

Hello Daniel,

You need to properly build Coreboot, integrating BYT-I (as I recall
minnow board) FSP, and the info about BYT-I FSP you can find here:
https://github.com/IntelFsp/FSP

Zoran
_______

On Wed, Mar 21, 2018 at 12:47 PM, Daniel Wagner <wagi at monom.org> wrote:
> Hi,
>
> I would like to test my -rt kernels releases on the minnowboard. Though
> cyclictest always reports 2 to 4 ms spikes. It looks like that the
> original firmware is stealing those cycles. So my plan was to try out
> coreboot and see if my theory is correct or not.
>
> Now, I am struggling with getting anything working. All my attempts to
> bake a working binary have been completely fruitless. Not a single char
> on the serial port. If I would at least get something on the serial port
> I could find my way through the maze.
>
> I am confident that flashing the device is works correctly via my
> raspberry pi [2]. When I flash the original firmware, the device comes
> back to live again.
>
> Unfortunately, the documentation on how to configure and build coreboot
> a bit outdated [1]. My google-foo didn't help either.
>
> Could someone share his/her current config and also post the SHAs of
> coreboot? This would rule out that part. I am not sure if my binary
> blobs I extracted or downloaded are okay (fd, me, gbe, FSB).
>
> Thanks,
> Daniel
>
> [1] https://elinux.org/Minnowboard:MinnowMaxCoreboot
> [2]
> https://3mdeb.com/firmware/flashing-minnowboard-turbot-with-raspberry-pi-zero-w/
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://mail.coreboot.org/mailman/listinfo/coreboot