[coreboot] RV: Error booting with TPM enabled.

Fri Jun 29 12:48:00 CEST 2018

Ok, I think I've found the problem... If I force in 'src/drivers/pc80/tpm/tis.c'

the path value to "\\_SB_.PCI0.LIBR" it works!

Now, I'll try to guess from where the "\_SB.\_SB.LIBR" current value comes from...
but now it's working.

Thanks!

Changes I've made:

static void lpc_tpm_fill_ssdt(struct device *dev)
{
    const char *path = acpi_device_path(dev->bus->dev);
    u32 arg;
/*
    if (!path) {
        path = "\\_SB_.PCI0.LPCB";
        printk(BIOS_DEBUG, "Using default TPM ACPI path: '%s'\n", path);
    }
*/
    path = "\\_SB_.PCI0.LIBR";
    printk(BIOS_DEBUG, "Using TPM ACPI path: '%s'\n", path);

________________________________
De: coreboot <coreboot-bounces at coreboot.org> en nombre de Jorge Fernandez Monteagudo <jorgefm at cirsa.com>
Enviado: viernes, 29 de junio de 2018 11:37:43
Para: Nico Huber; coreboot at coreboot.org; Zaolin
Asunto: Re: [coreboot] RV: Error booting with TPM enabled.

Hi!

Booting with acpi=noirq I can run the kernel and the dmesg show the next errors:

[    0.040912] ACPI: Added _OSI(Module Device)
[    0.040912] ACPI: Added _OSI(Processor Device)
[    0.040912] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040912] ACPI: Added _OSI(Processor Aggregator Device)
[    0.040912] ACPI: Added _OSI(Linux-Dell-Video)
[    0.041885] ACPI BIOS Error (bug): Failure looking up [\_SB.*SB.LIBR], AE_NOT_FOUND (20180313/dswload2-160)
[    0.044008] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180313/psobject-220)
[    0.044059] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180313/psparse-516)
[    0.045344] ACPI Error: Invalid zero thread count in method (20180313/dsmethod-760)
[    0.045395] ACPI Error: Invalid OwnerId: 0x00 (20180313/utownerid-156)
[    0.045448] ACPI Error: AE_NOT_FOUND, (SSDT:COREBOOT) while loading table (20180313/tbxfload-197)
[    0.051635] ACPI Error: 1 table load failures, 3 successful (20180313/tbxfload-215)
[    0.054040] ACPI: Interpreter enabled
[    0.054100] ACPI: (supports S0 S1 S4 S5)
[    0.054144] ACPI: Using PIC for interrupt routing
[    0.054203] HEST: Table parsing has been initialized.
[    0.054249] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.054443] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.054857] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0._CRS.TOM1], AE_NOT_FOUND (20180313/psargs-330)
[    0.054914] ACPI Error: Method parse/execution failed \_SB.PCI0._CRS, AE_NOT_FOUND (20180313/psparse-516)
[    0.057653] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0._CRS.TOM1], AE_NOT_FOUND (20180313/psargs-330)
[    0.057711] ACPI Error: Method parse/execution failed \_SB.PCI0._CRS, AE_NOT_FOUND (20180313/psparse-516)
[    0.057770] acpi PNP0A08:00: [Firmware Bug]: no secondary bus range in _CRS
[    0.057823] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.057873] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.058009] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.058083] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0._CRS.TOM1], AE_NOT_FOUND (20180313/psargs-330)
[    0.058138] ACPI Error: Method parse/execution failed \_SB.PCI0._CRS, AE_NOT_FOUND (20180313/psparse-516)
[    0.058194] acpi PNP0A08:00: failed to parse _CRS method, error code -5
[    0.058240] acpi PNP0A08:00: Bus 0000:00 not present in PCI namespace
[    0.058329] ACPI: IRQ 3 override to edge, high
[    0.058428] ACPI: IRQ 4 override to edge, high
[    0.058527] PCI: setting IRQ 5 as level-triggered
[    0.058580] ACPI: IRQ 7 override to edge, high
[    0.058675] ACPI: IRQ 11 override to edge, high
[    0.058770] ACPI: IRQ 10 override to edge, high

Now, I'll try to patch the kernel to show all the symbols parsed...

Any hint is welcome!

Regards

________________________________
De: coreboot <coreboot-bounces at coreboot.org> en nombre de Jorge Fernandez Monteagudo <jorgefm at cirsa.com>
Enviado: jueves, 28 de junio de 2018 9:36:15
Para: Nico Huber; coreboot at coreboot.org; Zaolin
Asunto: Re: [coreboot] RV: Error booting with TPM enabled.

Hi!

I'm still trying to boot the linux kernel when the TPM is enabled...

>Background: the TPM driver calls acpi_device_path() which walks the
>devicetree hierarchy up and asks every device for its acpi_name().
>If you look at your devicetree, there is above your TPM, the `device
>pci 14.3` (LIBR), then `device domain 0` (PCI0) and finally an implicit
>root device (_SB_). The latter is hardcoded for all of coreboot.
>
>Now this acpi_name() has one peculiarity: When one device doesn't have
>this function, its parent's acpi_name() function is queried. That is
>why the acpi_name() implementations don't just `return "...";` but
>check for what device they were called, first.

I can see the TPM is initialized ok

agesawrapper_amdinitenv() returned AGESA_SUCCESS
TPM initialization.
TPM: Init
Found TPM SLB9660 TT 1.2 by Infineon
TPM: Open
TPM: Startup
TPM: command 0x99 returned 0x0
TPM: OK.
Timestamp - end of romstage: 7155473845

Lately, when the ACPI table is written I can see:

ACPI: Writing ACPI tables at 8fdc6000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
pm_base: 0x0800
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
CBFS: 'Master Header Locator' located CBFS at [200:7fffc0)
CBFS: Locating 'pci1002,9874.rom'
CBFS: Found @ offset b7e00 size fc00
Mapping PCI device 10029874 to 10029870
In CBFS, ROM address for PCI: 00:01.0 = ff8b8048
PCI expansion ROM, signature 0xaa55, INIT size 0xfc00, data ptr 0x01c0
PCI ROM image, vendor ID 1002, device ID 9870,
PCI ROM image, Class Code 030000, Code Type 00
PCI: 00:01.0: Missing ACPI scope
\_SB.\_SB.LIBR.TPM: LPC TPM PNP: 0c31.0
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI:    * TCPA
TCPA log created at 8fdb6000
ACPI: added table 3/32, length now 48
ACPI:    * MADT
ACPI: added table 4/32, length now 52
current = 8fdc8050
CBFS: 'Master Header Locator' located CBFS at [200:7fffc0)
CBFS: Locating 'pci1002,9874.rom'
CBFS: Found @ offset b7e00 size fc00
Mapping PCI device 10029874 to 10029870
In CBFS, ROM address for PCI: 00:01.0 = ff8b8048
PCI expansion ROM, signature 0xaa55, INIT size 0xfc00, data ptr 0x01c0
PCI ROM image, vendor ID 1002, device ID 9870,
PCI ROM image, Class Code 030000, Code Type 00
ACPI:    * VFCT at 8fdc8050
           Copying initialized VBIOS image from 000c0000
ACPI: added table 5/32, length now 56
ACPI:    * HPET
ACPI: added table 6/32, length now 60
ACPI: added table 7/32, length now 64
ACPI:    * IVRS at 8fdd7d28
  AGESA IVRS table NULL. Skipping.
ACPI:    * SRAT at 8fdd7d28
  AGESA SRAT table NULL. Skipping.
ACPI:   * SLIT at 8fdd7d28
  AGESA SLIT table NULL. Skipping.
ACPI:  * AGESA ALIB SSDT at 8fdd7d30
ACPI: added table 8/32, length now 68
ACPI:    * SSDT at 8fde0470
ACPI: added table 9/32, length now 72
ACPI:    * SSDT for PState at 8fde0cc4
ACPI: done.
ACPI tables: 109776 bytes.
smbios_write_tables: 8fdb5000

Where the path to TPM is:

\_SB.\_SB.LIBR.TPM: LPC TPM PNP: 0c31.0

It seems all ok for coreboot (device detected, initialized, no error messages, etc) but the linux kernel complains...

Is there some tool to analyze the ACPI table from coreboot to extract paths or anything relevant in order to know

what it's not working?

>The names returned have to match the names in the static ACPI tables.
>See your board's `dsdt.asl` and what it includes.

My board's dsdt.asl is the src/mainboard/amd/bettong/dsdt.asl from repository. I'm using that board to

do my testing, if you should take a look.

Attached is the trace log I get from coreboot.

Thanks for your help!

Jorge

________________________________
De: Nico Huber <nico.h at gmx.de>
Enviado: sábado, 23 de junio de 2018 12:28:05
Para: Jorge Fernandez Monteagudo; coreboot at coreboot.org; Zaolin
Asunto: Re: [coreboot] RV: Error booting with TPM enabled.

On 23.06.2018 07:58, Jorge Fernandez Monteagudo wrote:
>> I guess it's used, but you need an acpi name for all devices along the
>> path. "LIBR" is the name for the LPC device, there should also be one
>> for the PCI bus/domain. I would try `src/northbridge/amd/pi/00660F01/
>> northbridge.c`.
>
>
> Could you point me to an example to know what I have to look for, p.e,
> to a good supported board or something related. I'm still introducing me
> in the coreboot world :)

Didn't use a TPM with coreboot so far, so I don't know full working
examples (but there are some, I'm sure).

Regarding the domain, the code for 00730F01 looks like what I had in
mind: `src/northbridge/amd/pi/00730F01/northbridge.c:813`.

Background: the TPM driver calls acpi_device_path() which walks the
devicetree hierarchy up and asks every device for its acpi_name().
If you look at your devicetree, there is above your TPM, the `device
pci 14.3` (LIBR), then `device domain 0` (PCI0) and finally an implicit
root device (_SB_). The latter is hardcoded for all of coreboot.

Now this acpi_name() has one peculiarity: When one device doesn't have
this function, its parent's acpi_name() function is queried. That is
why the acpi_name() implementations don't just `return "...";` but
check for what device they were called, first.

The names returned have to match the names in the static ACPI tables.
See your board's `dsdt.asl` and what it includes.

Nico
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180629/bf96fbc5/attachment.html>