[coreboot] flashrom programmer

Zvi Vered veredz72 at gmail.com
Wed Jun 27 05:04:17 CEST 2018


Hello,

How can I know what is the right flashrom programmer I should use ?

under DOS\EFI I have a vendor's utility that enables flash programming.
But it can flash to a specified address.

The vendor's programmer works without any external hardware.
When I tried: flashrom --programmer internal, I got:
----------------------
flashrom v0.9.9-rc1-r1942 on Linux 4.13.0-36-generic (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
WARNING: No chipset found. Flash detection will most likely fail.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
----------------------
Thank you,
Zvika
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180627/e4d80cd7/attachment.html>


More information about the coreboot mailing list