[coreboot] BDX-DE PCI init fail

[Hilbert Tu(杜睿哲_Pegatron)]

Hi David,

When I saw following message, I got different result when using different payload for coreboot:
==========================================================================
Returned from FspNotify(EnumInitPhaseReadyToBoot)
Jumping to boot code at 000ff06e(7eff6000)
CPU0: stack: 00129000 - 0012a000, lowest used address 00129b00, stack used: 1280 bytes
entry    = 0x000ff06e
lb_start = 0x00100000
lb_size  = 0x001302f0
buffer   = 0x7ed60000
===========================================================================

If U-Boot is used as payload, it just rebooted and restarted again.
If Grub2 is used as payload, it just hung there.
If SeaBios is used as payload, the result is like following attached file:
http://mail.coreboot.org/pipermail/coreboot/attachments/20180105/209695a1/attachment.txt
Do you have any idea about this? Is there any action I can do to clarify what cause reboot? Thanks.

-Hilbert

This e-mail and its attachment may contain information that is confidential or privileged, and are solely for the use of the individual to whom this e-mail is addressed. If you are not the intended recipient or have received it accidentally, please immediately notify the sender by reply e-mail and destroy all copies of this email and its attachment. Please be advised that any unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited.
本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180108/32a81603/attachment.html>