[coreboot] New user of KGPE-D16

[Timothy Pearson]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Dead / incompatible DIMM, DIMM(s) in wrong slots, or damaged mainboard.
 The fact that the vendor BIOS won't post is a very bad sign, since in
our experience the vendor BIOS is far more forgiving of faulty DIMMs
than coreboot (basically, the vendor BIOS will show something on the VGA
port even if the DIMMs are completely damaged and unable to properly
store data).

On 02/14/2018 03:28 PM, Elisenda Cuadros wrote:
> Hello,
> 
> I recently bought an Asus KGPE-D16 board, with an Opteron 6238 and 4
> Micron MT18JSF25672PDZ-1G4F1DD modules.
> 
> Firstly I tried to boot with vendor BIOS but I don't get any output on VGA.
> 
> I have a PCI Post Card and it seems it arrives to 3E and then I think it
> enters in a loop.
> 
> I flashed Coreboot with default settings just to try to get some more
> useful logs. The result I think is more or less the same, it doesn't
> arrive to payload.
> 
> Memory is installed in A2,B2,C2 and D2 slots.
> 
> I spent multiple hours trying to figure where is the problem.
> 
> Do you have any ideas?
> 
> I attach the console log.
> 
> Thanks in advance.
> 
> Best Regards,
> 
> - Eli
> 


- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJahK4+AAoJEK+E3vEXDOFbho0H/1ARCd2hU4yd4kgbV2EFGUjp
5hBWzajE1qNKjh0GVyv4aWtOpnM/Vo6/A5OhANx1qN5hNgCJSYuOWZRJ1w+daTFD
vv6nweW48uuOr/5RPxtrb/a96IjyDbchdPGGimKgUJfSBDgcGzoQgt0N+yHnh63R
yapy2UrIZlm1uXOlukFVDeOI7LwRhquSrJMWcZa/DZyhIZCDUVQBgINSJVNL5pce
J8FXU5ZOvJwWtIijtiCuKoZ3KeF3LgS6XL7nnI16AvW+l3Cd22nMbcYIchNfedLc
pV/BMtsKFD7yTiajwE209Hcxh9mHr8CaI7lYjokP2mwxTQDzPxuipJIgsvlDfB0=
=yPaw
-----END PGP SIGNATURE-----