[coreboot] how to change PCI device's PFA
lance.zhao at gmail.com
Fri Aug 31 19:28:36 CEST 2018
Those devices have been fixed from chipset, I don't think any software side
can change that. I will prefer to have a quick scan of PCI spec 2.2 first,
which mentioned that clearly.
On Thu, Aug 30, 2018 at 11:44 PM Hilbert Tu(杜睿哲_Pegatron) <
Hilbert_Tu at pegatroncorp.com> wrote:
> In my devicetree.cb of Intel Harcuvar CRB, I see the following PCI
> device pci 14.0 on end # SATA Controller 1
> device pci 15.0 on end # XHCI USB Controller
> Can I change the device number for each different PCI device? For example,
> device pci 16.0 on end # SATA Controller 1
> device pci 17.0 on end # XHCI USB Controller
> Is this PCI enumeration same in Coreboot and kernel? Or can I change it
> This e-mail and its attachment may contain information that is
> confidential or privileged, and are solely for the use of the individual to
> whom this e-mail is addressed. If you are not the intended recipient or
> have received it accidentally, please immediately notify the sender by
> reply e-mail and destroy all copies of this email and its attachment.
> Please be advised that any unauthorized use, disclosure, distribution or
> copying of this email or its attachment is strictly prohibited.
> coreboot mailing list: coreboot at coreboot.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot