[coreboot] Denverton FSP usage

Hilbert Tu(杜睿哲_Pegatron) Hilbert_Tu at pegatroncorp.com
Tue Aug 7 07:57:14 CEST 2018

I found the related setting under “Generic Drivers” -> “Use FSP TempRamInit & TempRamExit APIs”. Ha.


From: Hilbert Tu(杜睿哲_Pegatron)
Sent: Monday, August 06, 2018 6:21 PM
To: coreboot at coreboot.org
Subject: Denverton FSP usage


I have an Intel Denverton (C3538) CPU board and try to use coreboot 4.8 to boot it up. The FSP I have consisted of 3 parts as FSP-T, FSP-M, FSP-S, but I don’t see the settings for specifying FSP-T in coreboot’s menuconfig. From the debug output, I got error code 2526 and I doubt it is due to lack of including FSP-T. Is there anyone can tell how to correctly use FSP-T? Thanks.

This e-mail and its attachment may contain information that is confidential or privileged, and are solely for the use of the individual to whom this e-mail is addressed. If you are not the intended recipient or have received it accidentally, please immediately notify the sender by reply e-mail and destroy all copies of this email and its attachment. Please be advised that any unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180807/988f1852/attachment.html>

More information about the coreboot mailing list