[coreboot] ast2400 / ast2500
tirumalesh at chalamarla.com
Sat Oct 21 04:00:57 CEST 2017
Thanks for the information.
As I understand correctly, the main support is for x86 only. So if we want to run coreboot as the only firmware, we have to do it our self.
On Fri, Oct 20, 2017 at 6:42 PM, Taiidan at gmx.com <Taiidan at gmx.com> wrote:
> On 10/20/2017 03:04 PM, Tirumalesh wrote: > Thanks for the reply, it is somewhat strange though. > > It means no server board runs fully with coreboot as firmware for both c86 and BMC. > > If this is not the case, what kind of bmc is used by all the supported boards, all of them are using different firmware for bmc and x86? As tim said the KGPE-D16 and KCMA-D8 have a fully open source libre init process on coreboot and support the libre OpenBMC for the AST BMC chip There aren't any other coreboot boards that support a BMC, and the only other device that has both fully open source firmware/init and an open source BMC off the shelf is the TALOS 2. Coreboot itself couldn't be ran on a BMC chip, well I suppose one could port it but there really wouldn't be a point to that as that isn't what it was designed for. PS welcome to the list :D
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot