[coreboot] Question about Intel HD graphics and FLR
Zoran Stojsavljevic
zoran.stojsavljevic at gmail.com
Thu Mar 30 13:29:37 CEST 2017
Hello Joshua,
I'll ask similar question, considering UEFI (BIOS). I have no idea if you
can issue somehow easy FLR (PCI Function Level Reset), but if you can, does
this use case repeat itself?
I found, related to BIOS, this pointer (
http://www.tomshardware.co.uk/forum/278002-30-solved-what-capability-option-bios),
since I do NOT recall this option in any (legacy and UEFI) of the BIOSes I
used (and I used lot (>100) of them). Probably, did not pay too much
attention, since I do not recall this option to be tested/used?!
Zoran
On Wed, Mar 29, 2017 at 10:49 PM, Joshua Pincus <joshua.pincus at gmail.com>
wrote:
> Hi,
>
> After performing just an FLR (PCI function level reset) of a Gen8 Intel HD
> graphics device, there's no VGA output from the device, no matter what I
> try to do. I've had coreboot reset the graphics control register, VGA
> control, VGA display disable bit, etc.
>
> Has anyone seen anything like this? The only way I can get VGA restored
> is by performing a system-level reset. But I just want to do an FLR. Any
> ideas?
>
> Thanks,
> JP
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170330/09cef00f/attachment.html>
More information about the coreboot
mailing list