[coreboot] SPI Flash does not work on Intel LeafHill CRB

[Toan Le manh]

@Andrey: The flashing is OK, but the board doesn't boot anything. The POST
CODE is always "0".
Even I tried flashing with IFWI .bin file released by Intel, the board
still doesn't boot.
Where can I select "Use IFWI stitching"?


2017-03-29 14:56 GMT+01:00 Andrey Petrov <andrey.petrov at intel.com>:

> Hi,
>
> On 03/29/2017 04:29 AM, Toan Le manh wrote:
>
>> I got the LeafHill CRB from Intel, tried flashing SPI chip (Winbond
>> W25Q128FW) using BeeProg2C.
>> However nothing worked. The Status Code remained "0".
>>
>
> Are you saying the flashing didn't work OR board doesn't boot after?
>
> If latter, did you select "Use IFWI stitching" ?
>
> Andrey
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>



-- 
-----------------------------------------------------
Manh Toan Le
mimoOn Vietnam Ltd.
mimoOn GmbH - http://www.mimoon.de/
(84) (97) 844-4764
(84) (363) 638-811
lemanhtoantb at gmail.com
Toan.Le at mimoOn.de
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170330/cfe5101c/attachment.html>